OpenVZ Forum

Home » Mailing lists » Users » Long: Debian etch, linux-image-2.6.18-openvz-13-39.1d1-amd64 -> Kernel panic
Long: Debian etch, linux-image-2.6.18-openvz-13-39.1d1-amd64 -> Kernel panic [message #20621] Sun, 23 September 2007 18:52
Martin Trtusek is currently offline  Martin Trtusek
Messages: 5
Registered: September 2007
Junior Member
Hello all,

 I experienced "Kernel panic - not syncing: Aiee, killing interrupt
handler!" with linux-image-2.6.18-openvz-13-39.1d1-amd64 on Debian etch
on 3 servers from 4 where this kernel was installed. I am new in OpenVZ,
perhabs it is faulty on my side. But this info can be interesting for
other users with Debian etch.

 I installed linux-image-2.6.18-openvz-13-39.1d1-amd64 kernel on 4
servers without setting up any VPS (I would like to prepare servers for
later switch some daemons to VPS). 3 of them crashes soon or later
(particular below). Today I was able to do foto of crash screen
(previous two crash was on server outside, and I did not have
possibility to see screen), foto is enclosed.

 On all 4 servers i did installation on this way:
- wget
- dpkg -i linux-image-2.6.18-openvz-13-39.1d1-amd64_028.39.1d1_amd64.deb
- reboot # to kernel linux-image-2.6.18-openvz-13-39.1d1-amd64
- aptitude install vzctl vzquota # from etch -> vzctl version 3.0.11
- reboot

1. server:
- HP Proliant DL140 G3, CPU 2x Xeon 3GHz, 2048MB RAM
 * 2x 80GB SATA HDD in Linux Software RAID level 1
- linux-image-2.6.18-openvz-13-39.1d1-amd64 installed 11/9/07
- no crash until today

2. server
- HP Proliant ML110G4, Pentium(R) D CPU 2.80GHz, 1024MB RAM
 * 3x 250GB + 1x160GB SATA HDD in Linux Software RAID level 5
- linux-image-2.6.18-openvz-13-39.1d1-amd64 installed 13/9/07
- crash 5 minute after installation, then until today without crash
 * in logs nothing usefull

3. server
- HP Proliant ML350 G5, CPU DualCore Xeon 1,6GHz/1066MHz, 2048MB RAM
 * 4x160GB SATA HDD in Hardware RAID 10 (/dev/cciss/c0d0)
- linux-image-2.6.18-openvz-13-39.1d1-amd64 installed 13/9/07
- crash 18/9/07 about 22:00, then until today without crash
 * in logs was row about regular 5min cron jobs, whereas missing one
from series was /usr/share/vzctl/scripts/vpsnetclean

4. server
- LYNX server AspenHill, Intell Core Duo E6320, 4GB RAM
 * 4x 320GB SATA HDD in Linux Software RAID level 10
- linux-image-2.6.18-openvz-13-39.1d1-amd64 installed 21/9/07 at 18:17
- crash 21/9/07 about 21:30
 * in logs is full series of 5min cron jobs (last
one /usr/share/vzctl/scripts/vpsreboot)
 * foto of screen enclosed

After crash of server 4, I decided
linux-image-2.6.18-openvz-13-39.1d1-amd64 is unstable for me, and I
downgraded all 4 servers to linux-image-2.6.18-openvz-13-1etch4-amd64
(by downloading prepared deb from Hope this solve
my situation.

Maybe the problem is in version of vzctl (kernel patch for
13-39.1d1-amd64 is in lenny and there is vzctl in version 3.0.18-1
instead 3.0.11-13 from etch).

Martin Trtusek
Previous Topic: Problem with patch by openvz, where should I report that?
Next Topic: Device or resource busy on /vz/private/$VPSID
Goto Forum:

Current Time: Mon Aug 26 00:10:43 GMT 2019