OpenVZ Forum: Support » 2 different networks on same VE

Home » General » Support » 2 different networks on same VE

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

2 different networks on same VE [message #49036]

Thu, 28 February 2013 10:19

TheGreatDoc
Messages: 3
Registered: February 2013
Location: España

Junior Member

Hi all,

I have a HN with 2 NIC in different subnets.

eth0 is 84.232.ab.8
eth1 is 172.20.20.253

Both networks works well if I only set one ip on the VE, but if I try to set both, the second one will not route.

Example.

VE with 172.20.20.252 will work perfectly with my internal network
VE with 84.232.ab.55 will work perfectly with my internal network

But, if I setup a VE with Primary IP 172.20.20.252 and Secondary 84.232.ab.55 only 172.20.20.252 will work, while 84.232.ab.55 will only be able to ping or communicate with HN.

If I switch primary and secondary, being 84.232.ab.55 primary ip address and 172.20.20.252 secondary, 84.232.ab.55 will work and 172.20.20.252 will only ping/communicate with HN.

System is a debian with Linux virt2 2.6.32-5-openvz-686

I also need to say I have one VE with IPv4 and IPv6 address and both work well.

In Attachment are the info about rules, routes, etc...