OpenVZ Forum


Home » General » Discussions » HN with multiple NICs and two CT (How to assign a public IP address from a HN's NIC to a CT)
icon5.gif  HN with multiple NICs and two CT [message #47236] Wed, 25 July 2012 11:07
ralcantara is currently offline  ralcantara
Messages: 1
Registered: July 2012
Location: EspaƱa
Junior Member

Hi:

I have this setup:


  • One HN with 4 NICs. One NIC is connected to the local network with a static IP address (eth0) and the other three (eth1, eth2 & eth3) are connected to a cable-modem using a switch. The IP addresses are obtained using DHCP from the former cable-modem.
  • Two CTs (CT1 and CT2) that should have two of the public IP addresses that the HN owns (eth2 & eth3).


I can ping to all the IP addresses from Internet so routing is running fine. I've tried different setups using venet y veth without success. My question is, is it possible to assign eth2 to CT1 and eth3 to CT2?

Thanks in advance.
Rafa.
Previous Topic: Store containers on iSCSI/DRBD storage
Next Topic: Network help
Goto Forum:
  


Current Time: Tue Mar 19 04:06:58 GMT 2024

Total time taken to generate the page: 0.02482 seconds