OpenVZ Forum: Discussions » HN with multiple NICs and two CT

Home » General » Discussions » HN with multiple NICs and two CT (How to assign a public IP address from a HN's NIC to a CT)

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

HN with multiple NICs and two CT [message #47236]

Wed, 25 July 2012 11:07

ralcantara
Messages: 1
Registered: July 2012
Location: España

Junior Member

Hi:

I have this setup:

One HN with 4 NICs. One NIC is connected to the local network with a static IP address (eth0) and the other three (eth1, eth2 & eth3) are connected to a cable-modem using a switch. The IP addresses are obtained using DHCP from the former cable-modem.
Two CTs (CT1 and CT2) that should have two of the public IP addresses that the HN owns (eth2 & eth3).

I can ping to all the IP addresses from Internet so routing is running fine. I've tried different setups using venet y veth without success. My question is, is it possible to assign eth2 to CT1 and eth3 to CT2?

Thanks in advance.
Rafa.

Report message to a moderator

Previous Topic:	Store containers on iSCSI/DRBD storage
Next Topic:	Network help

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 13 02:39:08 GMT 2024

Total time taken to generate the page: 0.02535 seconds