OpenVZ Forum: Support » [solved] x86_64 Kernel: 2.6.18-92.1.1.el5.028s won't boot

Home » General » Support » [solved] x86_64 Kernel: 2.6.18-92.1.1.el5.028s won't boot

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

[solved] x86_64 Kernel: 2.6.18-92.1.1.el5.028s won't boot [message #32675]

Fri, 22 August 2008 19:16

vztester
Messages: 19
Registered: August 2008

Junior Member

It freezes on the line:

No dock devices found.

rtt

[Updated on: Sun, 24 August 2008 05:39] by Moderator

Report message to a moderator

Re: x86_64 Kernel: 2.6.18-92.1.1.el5.028s won't boot [message #32679 is a reply to message #32675]

Sat, 23 August 2008 10:11

khorenko
Messages: 533
Registered: January 2006
Location: Moscow, Russia

Senior Member

Hello,

please, clarify your experiment a bit:
1) which host OS do you use?
2) which kernel can you use normally?
3) output of:
# rpm -qa --queryformat "%{name} %{version} %{release} %{arch}\n" | grep kernel

If you'll see 2 entries for ovz kernel - one 32 bit and one 64bit, then please, remove 32bit version kernel and reinstall 64bit ovz kernel manually - this hopefully will fix the issue.

if not:
4) complete bootlogs for the native kernel which boots ok
5) `lspci`, `lspci -n`
6) boot loader config
7) `mount`
Cool

preferably we'll need the complete logs of ovz kernel booting - you can get it with serial console (you can find info on our wiki), but we can try to findout something if you send us at least a picture of the screen with hanged ovz kernel.

Thank you.

--
Konstantin

If your problem is solved - please, report it!
It's even more important than reporting the problem itself...

Report message to a moderator

Re: x86_64 Kernel: 2.6.18-92.1.1.el5.028s won't boot [message #32683 is a reply to message #32679]

Sat, 23 August 2008 21:24

vztester
Messages: 19
Registered: August 2008

Junior Member

Thanks the mistake was mine.

yum installed both 686 and x64 kernels.
I must have been trying the 686 kernel.
I removed all OpenVZ kernels, and just had the X64 installed and it booted fine.

rtt

Report message to a moderator

Previous Topic:	revive vzprocps? (vzpid and top)
Next Topic:	Troubleshooting VE start failure

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 01 20:07:15 GMT 2023

Total time taken to generate the page: 0.03998 seconds