OpenVZ Forum


Home » Mailing lists » Devel » [PATCH][NETNS] Use list_for_each_entry_continue_reverse in setup_net
[PATCH][NETNS] Use list_for_each_entry_continue_reverse in setup_net [message #20363] Mon, 17 September 2007 11:02 Go to next message
Pavel Emelianov is currently offline  Pavel Emelianov
Messages: 1149
Registered: September 2006
Senior Member
I proposed introducing a list_for_each_entry_continue_reverse
macro to be used in setup_net() when unrolling the failed
->init callback.

Here is the macro and some more cleanup in the setup_net() itself
to remove one variable from the stack :) Minor, but the code
looks nicer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

---

 include/linux/list.h     |   14 ++++++++++++++
 net/core/net_namespace.c |    8 +++-----
 2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/include/linux/list.h b/include/linux/list.h
index f29fc9c..ad9dcb9 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -525,6 +525,20 @@ static inline void list_splice_init_rcu(
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 1fc513c..a9dd261 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -102,7 +102,6 @@ static int setup_net(struct net *net)
 {
 	/* Must be called with net_mutex held */
 	struct pernet_operations *ops;
-	struct list_head *ptr;
 	int error;
 
 	memset(net, 0, sizeof(struct net));
@@ -110,8 +109,7 @@ static int setup_net(struct net *net)
 	atomic_set(&net->use_count, 0);
 
 	error = 0;
-	list_for_each(ptr, &pernet_list) {
-		ops = list_entry(ptr, struct pernet_operations, list);
+	list_for_each_entry(ops, &pernet_list, list) {
 		if (ops->init) {
 			error = ops->init(net);
 			if (error < 0)
@@ -120,12 +118,12 @@ static int setup_net(struct net *net)
 	}
 out:
 	return error;
+
 out_undo:
 	/* Walk through the list backwards calling the exit functions
 	 * for the pernet modules whose init functions did not fail.
 	 */
-	for (ptr = ptr->prev; ptr != &pernet_list; ptr = ptr->prev) {
-		ops = list_entry(ptr, struct pernet_operations, list);
+	list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
 		if (ops->exit)
 			ops->exit(net);
 	}
Re: [PATCH][NETNS] Use list_for_each_entry_continue_reverse in setup_net [message #20375 is a reply to message #20363] Mon, 17 September 2007 13:07 Go to previous messageGo to next message
ebiederm is currently offline  ebiederm
Messages: 1354
Registered: February 2006
Senior Member
Pavel Emelyanov <xemul@openvz.org> writes:

> I proposed introducing a list_for_each_entry_continue_reverse
> macro to be used in setup_net() when unrolling the failed
> ->init callback.
>
> Here is the macro and some more cleanup in the setup_net() itself
> to remove one variable from the stack :) Minor, but the code
> looks nicer.
>
> Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pavel if you are going down this route.  Could you look at
cleanup_net as well.  The reverse walk there could probably
benefit from being list_for_each_entry_reverse.

Eric


>
> ---
>
>  include/linux/list.h     |   14 ++++++++++++++
>  net/core/net_namespace.c |    8 +++-----
>  2 files changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/include/linux/list.h b/include/linux/list.h
> index f29fc9c..ad9dcb9 100644
> --- a/include/linux/list.h
> +++ b/include/linux/list.h
> @@ -525,6 +525,20 @@ static inline void list_splice_init_rcu(
>  	     pos = list_entry(pos->member.next, typeof(*pos), member))
>  
>  /**
> + * list_for_each_entry_continue_reverse - iterate backwards from the given
> point
> + * @pos:	the type * to use as a loop cursor.
> + * @head:	the head for your list.
> + * @member:	the name of the list_struct within the struct.
> + *
> + * Start to iterate over list of given type backwards, continuing after
> + * the current position.
> + */
> +#define list_for_each_entry_continue_reverse(pos, head, member) \
> +	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
> +	     prefetch(pos->member.prev), &pos->member != (head);	\
> +	     pos = list_entry(pos->member.prev, typeof(*pos), member))
> +
> +/**
>   * list_for_each_entry_from - iterate over list of given type from the current
> point
>   * @pos:	the type * to use as a loop cursor.
>   * @head:	the head for your list.
> diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
> index 1fc513c..a9dd261 100644
> --- a/net/core/net_namespace.c
> +++ b/net/core/net_namespace.c
> @@ -102,7 +102,6 @@ static int setup_net(struct net *net)
>  {
>  	/* Must be called with net_mutex held */
>  	struct pernet_operations *ops;
> -	struct list_head *ptr;
>  	int error;
>  
>  	memset(net, 0, sizeof(struct net));
> @@ -110,8 +109,7 @@ static int setup_net(struct net *net)
>  	atomic_set(&net->use_count, 0);
>  
>  	error = 0;
> -	list_for_each(ptr, &pernet_list) {
> -		ops = list_entry(ptr, struct pernet_operations, list);
> +	list_for_each_entry(ops, &pernet_list, list) {
>  		if (ops->init) {
>  			error = ops->init(net);
>  			if (error < 0)
> @@ -120,12 +118,12 @@ static int setup_net(struct net *net)
>  	}
>  out:
>  	return error;
> +
>  out_undo:
>  	/* Walk through the list backwards calling the exit functions
>  	 * for the pernet modules whose init functions did not fail.
>  	 */
> -	for (ptr = ptr->prev; ptr != &pernet_list; ptr = ptr->prev) {
> -		ops = list_entry(ptr, struct pernet_operations, list);
> +	list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
>  		if (ops->exit)
>  			ops->exit(net);
>  	}
[PATCH][NETNS] Use list_for_each_entry_continue_reverse in setup_net [message #20380 is a reply to message #20375] Mon, 17 September 2007 13:54 Go to previous messageGo to next message
Pavel Emelianov is currently offline  Pavel Emelianov
Messages: 1149
Registered: September 2006
Senior Member
[snip]

> Pavel if you are going down this route.  Could you look at
> cleanup_net as well.  The reverse walk there could probably
> benefit from being list_for_each_entry_reverse.

Oh! Thanks a lot ;) Here's the new patch.

Log:

I proposed introducing a list_for_each_entry_continue_reverse
macro to be used in setup_net() when unrolling the failed
->init callback.

Here is the macro and some more cleanup in the setup_net() itself
to remove one variable from the stack :) Minor, but the code
looks nicer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

---

diff --git a/include/linux/list.h b/include/linux/list.h
index f29fc9c..ad9dcb9 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -525,6 +525,20 @@ static inline void list_splice_init_rcu(
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 1fc513c..0e6cb02 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -56,7 +56,6 @@ static void net_free(struct net *net)
 static void cleanup_net(struct work_struct *work)
 {
 	struct pernet_operations *ops;
-	struct list_head *ptr;
 	struct net *net;
 
 	net = container_of(work, struct net, work);
@@ -69,8 +68,7 @@ static void cleanup_net(struct work_stru
 	net_unlock();
 
 	/* Run all of the network namespace exit methods */
-	list_for_each_prev(ptr, &pernet_list) {
-		ops = list_entry(ptr, struct pernet_operations, list);
+	list_for_each_entry_reverse(ops, &pernet_list, list) {
 		if (ops->exit)
 			ops->exit(net);
 	}
@@ -102,7 +100,6 @@ static int setup_net(struct net *net)
 {
 	/* Must be called with net_mutex held */
 	struct pernet_operations *ops;
-	struct list_head *ptr;
 	int error;
 
 	memset(net, 0, sizeof(struct net));
@@ -110,8 +107,7 @@ static int setup_net(struct net *net)
 	atomic_set(&net->use_count, 0);
 
 	error = 0;
-	list_for_each(ptr, &pernet_list) {
-		ops = list_entry(ptr, struct pernet_operations, list);
+	list_for_each_entry(ops, &pernet_list, list) {
 		if (ops->init) {
 			error = ops->init(net);
 			if (error < 0)
@@ -120,12 +116,12 @@ static int setup_net(struct net *net)
 	}
 out:
 	return error;
+
 out_undo:
 	/* Walk through the list backwards calling the exit functions
 	 * for the pernet modules whose init functions did not fail.
 	 */
-	for (ptr = ptr->prev; ptr != &pernet_list; ptr = ptr->prev) {
-		ops = list_entry(ptr, struct pernet_operations, list);
+	list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
 		if (ops->exit)
 			ops->exit(net);
 	}
Re: [PATCH][NETNS] Use list_for_each_entry_continue_reverse in setup_net [message #20438 is a reply to message #20375] Tue, 18 September 2007 01:58 Go to previous message
davem is currently offline  davem
Messages: 463
Registered: February 2006
Senior Member
From: ebiederm@xmission.com (Eric W. Biederman)
Date: Mon, 17 Sep 2007 07:07:42 -0600

> Pavel if you are going down this route.  Could you look at
> cleanup_net as well.  The reverse walk there could probably
> benefit from being list_for_each_entry_reverse.

Pavel please resubmit this work after everything has been
resolved, thanks.

If you have already, please resend as I don't have a copy.
Previous Topic: [PATCH 33/33] memory-controller-make-charging-gfp-mask-aware
Next Topic: [PATCH] Hookup group-scheduler with task container infrastructure
Goto Forum:
  


Current Time: Tue Jun 25 04:56:54 GMT 2024

Total time taken to generate the page: 0.02718 seconds