| Difference between (h)top on HN and VE [message #39076] |
Fri, 12 March 2010 15:25  |
TheStig
Messages: 94
Registered: December 2008
|
Member |
|
|
I discovered that benchmarking my dynamical website using apachebench, vmstat, top and htop on my VE all show that my cpu's are pretty busy. The combined CpuLoad at the same time on my HN on the other hand ist seldomly above 35%. The difference is "visible" the most using htop. Whereas (h)top on the VE shows about 70% user load and 30%idle on the VE those values are reversed on the HN.
I use the 2.6.26-2-openvz-amd64 kernel, so afaik the cpuunits and cpulimit values don't matter (but they are set anyway to guarantee the VE maximum power - 10000 for the VE and 1000 for VE0 and cpulimit of 750 for the VE). I'm using a i7 Core with HT enabled, so I guess that could have something to do with it as a load of above 40 % in absence of a slow I/O subsystem should mean, that all four physical CPU's are calculating "as fast as possible".
So my question is, if it's normal for those tools to present completely different values for the VE and HN on systems with Hyperthreading enabled CPUs.
[Updated on: Fri, 12 March 2010 15:35] Report message to a moderator |
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
