Home » International » Russian » сетевые странности
сетевые странности [message #31517] |
Wed, 02 July 2008 20:47 ![Go to next message Go to previous message](/theme/ovz3/images/down.png) |
umask
Messages: 23 Registered: December 2007
|
Junior Member |
|
|
доброе время суток!
Имеем.
1. ОС Centos 5 (up2date) на хост ноде:
cat /etc/redhat-release
CentOS release 5.2 (Final)
2. uname -a (на хост ноде)
Linux host01.test.ru 2.6.18-53.1.19.el5.028stab053.14 #1 SMP Thu May 8 20:43:27 MSD 2008 i686 i686 i386 GNU/Linux
3. VPS 1100
ONBOOT="yes"
# UBC parameters (in form of barrier:limit)
KMEMSIZE="2147483647:2147483647"
LOCKEDPAGES="2147483647:2147483647"
PRIVVMPAGES="2147483647:2147483647"
SHMPAGES="2147483647:2147483647"
NUMPROC="2147483647:2147483647"
PHYSPAGES="2147483647:2147483647"
VMGUARPAGES="2147483647:2147483647"
OOMGUARPAGES="2147483647:2147483647"
NUMTCPSOCK="2147483647:2147483647"
NUMFLOCK="2147483647:2147483647"
NUMPTY="2147483647:2147483647"
NUMSIGINFO="2147483647:2147483647"
TCPSNDBUF="2147483647:2147483647"
TCPRCVBUF="2147483647:2147483647"
OTHERSOCKBUF="2147483647:2147483647"
DGRAMRCVBUF="2147483647:2147483647"
NUMOTHERSOCK="2147483647:2147483647"
DCACHESIZE="2147483647:2147483647"
NUMFILE="2147483647:2147483647"
AVNUMPROC="180:180"
NUMIPTENT="2147483647:2147483647"
# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="100000000:120000000"
DISKINODES="10000000:15000000"
QUOTATIME="0"
# CPU fair sheduler parameter
CPUUNITS="500000"
IP_ADDRESS="192.168.1.10"
HOSTNAME="a.host01.test.ru"
VE_ROOT="/vz/root/$VEID"
VE_PRIVATE="/vz/private/$VEID"
OSTEMPLATE="centos-5-i386-minimal"
ORIGIN_SAMPLE="vps.basic"
NAMESERVER="192.168.1.1"
SEARCHDOMAIN="testru"
CPULIMIT="1000"
т.е. все лимиты откручены.
4. хост нода либо p4/1gb ram, либо dual xeon/4gb ram - результат один.
5. на хост ноде cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl( and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 0
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 4294967295
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 268435456
# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled
net.ipv4.ip_forward = 1
net.ipv4.conf.default.proxy_arp = 0
# Enables source route verification
net.ipv4.conf.all.rp_filter = 1
# Enables the magic-sysrq key
kernel.sysrq = 1
# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn = 0
# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
# Local port range
net.ipv4.ip_local_port_range = 8192 65535
# Netfilter connection tracking table size
net.ipv4.ip_conntrack_max = 258068
# For servers that receive many connections at the same time,
# the TIME-WAIT sockets for new connections can be reused.
# This is useful in Web servers etc. See also net.ipv4.tcp_tw_recycle.
net.ipv4.tcp_tw_reuse = 1
# Enable fast recycling of TIME-WAIT sockets status
net.ipv4.tcp_tw_recycle = 1
# Tune VM subsystem to use swap only as last resort
vm.swappiness = 1
# Limit of socket listen() backlog, known in userspace as SOMAXCONN.
# Defaults to 128. See also tcp_max_syn_backlog for additional tuning
# for TCP sockets.
net.core.somaxconn = 2048
# The maximum number of queued connection requests which have still not
# received an acknowledgement from the connecting client. If this
# number is exceeded, the kernel will begin dropping requests.
# The default value of 256 is increased to 1024 when the memory present
# in the system is adequate or greater (>= 128Mb), and reduced to 128
# for those systems with very low memory (<= 32Mb). It is recommended
# that if this needs to be increased above 1024, TCP_SYNQ_HSIZE in
# include/net/tcp.h be modified to keep
# TCP_SYNQ_HSIZE*16<=tcp_max_syn_backlog, and the kernel be recompiled.
net.ipv4.tcp_max_syn_backlog = 1024
# Maximum number of packets in the global input queue.
# for 1 GBit links recommended value near 3000
net.core.netdev_max_backlog = 2500
# prevent time wait bucket table overflow
net.ipv4.tcp_max_tw_buckets_ub = 129034
net.ipv4.tcp_max_tw_kmem_fraction = 384
# This sets the max OS receive buffer size for all types of connections.
net.core.rmem_max = 16777216
# This sets the max OS send buffer size for all types of connections.
net.core.wmem_max = 16777216
# This sets the default OS receive buffer size for all types of connections.
net.core.rmem_default = 65535
# This sets the default OS send buffer size for all types of connections.
net.core.wmem_default = 65535
# TCP Autotuning setting. "The tcp_mem variable defines how the TCP stack
# should behave when it comes to memory usage. ... The first value specified
# in the tcp_mem variable tells the kernel the low threshold. Below this
# point, the TCP stack do not bother at all about putting any pressure on the
# memory usage by different TCP sockets. ... The second value tells the
# kernel at which point to start pressuring memory usage down. ... The final
# value tells the kernel how many memory pages it may use maximally.
# If this value is reached, TCP streams and packets start getting dropped
# until we reach a lower memory usage again. This value includes all
# TCP sockets currently in use."
net.ipv4.tcp_mem = 16777216 16777216 16777216
# TCP Autotuning setting. "The first value tells the kernel the minimum
# receive buffer for each TCP connection, and this buffer is always allocated
# to a TCP socket, even under high pressure on the system. ... The second
# value specified tells the kernel the default receive buffer allocated for
# each TCP socket. This value overrides the /proc/sys/net/core/rmem_default
# value used by other protocols. ... The third and last value specified in
# this variable specifies the maximum receive buffer that can be allocated
# for a TCP socket."
net.ipv4.tcp_rmem = 4096 131072 16777216
# TCP Autotuning setting. "This variable takes 3 different values which holds
# information on how much TCP sendbuffer memory space each TCP socket has to
# use. Every TCP socket has this much buffer space to use before the buffer
# is filled up. Each of the three values are used under different conditions.
# ... The first value in this variable tells the minimum TCP send buffer
# space available for a single TCP socket. ... The second value in the variable
# tells us the default buffer space allowed for a single TCP socket to use.
# ... The third value tells the kernel the maximum TCP send buffer space."
net.ipv4.tcp_wmem = 4096 131072 16777216
# This will enusre that immediatly subsequent connections use these values.
net.ipv4.route.flush=1
# RFC 2018 TCP Selective Acknowledgements
net.ipv4.tcp_sack = 0
# RFC 1323 TCP timestamps
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 1
# Enable TCP behaviour conformant with RFC 1337. When disabled,
# if a RST is received in TIME_WAIT state, we close the socket
# immediately without waiting for the end of the TIME_WAIT period.
net.ipv4.tcp_rfc1337 = 1
6. iptables и на хост ноде, и на VPS отключен (chkconfig iptables off).
7. на VPS стоит nginx 0.6.31.
cat /etc/nginx/nginx.conf
user nginx nginx;
worker_processes 4;
worker_rlimit_nofile 16384;
error_log /var/log/nginx/error.log debug;
events {
worker_connections 16384;
use epoll;
}
http {
include /etc/nginx/mime.types;
default_type text/plain;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'"$status" $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for" '
'$request_time "$upstream_addr" [$upstream_response_time]';
log_format compat '$remote_addr - $remote_user [$time_local] "$request" '
'"$status" $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
sendfile on;
tcp_nopush on;
tcp_nodelay on;
client_header_timeout 60;
client_body_timeout 60;
send_timeout 30;
keepalive_timeout 0;
reset_timedout_connection on;
server {
listen 80 default backlog=16384 rcvbuf=4096 sndbuf=4096 deferred;
server_name .test.ru;
error_log /var/log/nginx/test.ru_error.log debug;
access_log /var/log/nginx/test.ru_access_main.log main;
location /nginx_status {
stub_status on;
access_log off;
}
fastcgi_intercept_errors on;
proxy_intercept_errors on;
error_page 500 502 503 504 /50x_empty.html;
error_page 400 401 402 403 404 405 /50x_empty.html;
location = /50x_empty.html {
root /home/nginx/htdocs;
}
location ~ \.(wml|php)$ {
proxy_read_timeout 3;
proxy_connect_timeout 3;
proxy_pass http://127.0.0.1:8080;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $host;
}
}
}
вместо nginx использовались так же tomcat и apache httpd-2.2.8/2.2.9.
8. sysctl на VPS по умолчанию.
9. вот такой скрипт на php (так же проверялось на java) - dummy.php
<?
$max = 0;
for($i=0;$i<1000;$i++){
$t = microtime(true);
file_get_contents("http://192.168.1.10/nginx_status");
$t = microtime(true)-$t;
if ($t>$max) $max = $t;
}
echo $max;
?>
10. Отдельное замечения - DNS нигде не используется (проверялось tcpdump многократно).
11. dummy.php запускаем так:
while : ; do php dummy.php ; done | grep -e "[1-9]\.[0-9]"
чтобы видеть когда были ответы длинее секунды.
п.11 выдаёт следующую печальную картину:
3.0010089874268
3.0013828277588
3.001168012619
3.0015661716461
3.0009059906006
3.0006580352783
3.0018539428711
3.0014488697052
3.0009009838104
3.0018038749695
Теперь берём и запускаем nginx/tomcat/httpd на хост ноде и !ВНИМАНИЕ! - проблема не наблюдается!
На всякий случай:
cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt
1100: kmemsize 4334631 9382841 2147483647 2147483647 0
lockedpages 0 0 2147483647 2147483647 0
privvmpages 245588 246632 2147483647 2147483647 0
shmpages 1 1 2147483647 2147483647 0
dummy 0 0 0 0 0
numproc 118 122 2147483647 2147483647 0
physpages 34130 34505 2147483647 2147483647 0
vmguarpages 0 0 2147483647 2147483647 0
oomguarpages 34130 34505 2147483647 2147483647 0
numtcpsock 14 16 2147483647 2147483647 0
numflock 1 2 2147483647 2147483647 0
numpty 0 1 2147483647 2147483647 0
numsiginfo 0 2 2147483647 2147483647 0
tcpsndbuf 125216 125216 2147483647 2147483647 0
tcprcvbuf 229376 229376 2147483647 2147483647 0
othersockbuf 11180 13416 2147483647 2147483647 0
dgramrcvbuf 0 0 2147483647 2147483647 0
numothersock 11 13 2147483647 2147483647 0
dcachesize 0 0 2147483647 2147483647 0
numfile 2082 2158 2147483647 2147483647 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 10 10 2147483647 2147483647 0
0: kmemsize 3298695 16916897 2147483647 2147483647 0
lockedpages 1083 1083 2147483647 2147483647 0
privvmpages 12459 14060 2147483647 2147483647 0
shmpages 656 672 2147483647 2147483647 0
dummy 0 0 2147483647 2147483647 0
numproc 73 85 2147483647 2147483647 0
physpages 4553 4994 2147483647 2147483647 0
vmguarpages 0 0 2147483647 2147483647 0
oomguarpages 4553 4994 2147483647 2147483647 0
numtcpsock 3 3 2147483647 2147483647 0
numflock 4 5 2147483647 2147483647 0
numpty 1 1 2147483647 2147483647 0
numsiginfo 0 2 2147483647 2147483647 0
tcpsndbuf 35724 35724 2147483647 2147483647 0
tcprcvbuf 49152 32768 2147483647 2147483647 0
othersockbuf 154284 161420 2147483647 2147483647 0
dgramrcvbuf 0 8380 2147483647 2147483647 0
numothersock 122 126 2147483647 2147483647 0
dcachesize 0 0 2147483647 2147483647 0
numfile 1531 1771 2147483647 2147483647 0
dummy 0 0 2147483647 2147483647 0
dummy 0 0 2147483647 2147483647 0
dummy 0 0 2147483647 2147483647 0
numiptent 10 10 2147483647 2147483647 0
параметры sysctl я как только не пробовал крутить... не однократно устраивал двум испытуемым серверам перезагрузки, /var/log/messages и dmesg пусты - ничего, чтобы говорило о проблеме.
Угробил почти сутки на поиск причины.
Подскажите, куда копать...
|
|
|
Goto Forum:
Current Time: Mon Sep 02 01:01:04 GMT 2024
Total time taken to generate the page: 0.05794 seconds
|