| ipsec in openvz - cannot ping containers on the same host [message #51650] |
Fri, 12 September 2014 14:32  |
sikp
Messages: 2
Registered: September 2014
|
Junior Member |
|
|
Hi,
I have ipsec in openvz container. Seemingly all is running and connection is sucessfully established.
But I have weird problem - I cannot ping containers which are on the same host as the ipsec gw.
Other containers - on different hosts - are ok. Better exaplained by the "image" I hope :-):
ipsec - other location - can ping host2 and container2-1 but I cannot ping host1 and container1-2 from here
|
INTERNET
|
host 1 - 10.8.1.1
container1-1 10.8.200.1 - ipsec+firewall
container1-2 10.8.200.2
|
LAN
|
host 2 - 10.8.1.2
container2-1 10.8.200.3
I can ping host2 and container2-1
but I cannot ping host1 and container1-2
When I ping container1-2,
I see packets in container1-1(ipsec) on external iface eth1
root@container1-1:/# tcpdump -i eth1 host 10.2.1.159
11:55:20.599632 IP 10.2.1.159 > 10.8.200.2: ICMP echo request, id 12765, seq 366, length 64
I see them also in container1-1 LAN iface eth0
root@container1-1:/# tcpdump -i eth0 host 10.2.1.159
11:55:20.599632 IP 10.2.1.159 > 10.8.200.2: ICMP echo request, id 12765, seq 366, length 64
And I see them in host1 in bridge vmbr0 (bridged as eth0 in container1:1)
root@host1:~# tcpdump host 10.2.1.159 -i vmbr0
11:55:20.599632 IP 10.2.1.159 > 10.8.200.2: ICMP echo request, id 12765, seq 366, length 64
But I cannot see them in container1-2
root@container1-2:/# tcpdump -i venet0 host 10.2.1.159
When I try ping host1, it's similar - I see ICMP requests packets in host1 but there is no reply to them.
My config:
My kernel
root@host1:~# uname -a
Linux host1 2.6.32-29-pve #1 SMP Thu Apr 24 10:03:02 CEST 2014 x86_64 GNU/Linux
There are no iptables rules - all acccept
My host network configuration:
iface vmbr0 inet static
address 10.8.1.1
netmask 255.255.0.0
gateway 10.8.200.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
auto vmbr1
iface vmbr1 inet static
bridge_ports eth1
bridge_stp off
bridge_fd 0
My ipsec container configuration (only part of..):
..
NETIF=" ifname=eth0,bridge=vmbr0,mac=5E:A0:6E:9F:45:1F,host_ifname=v eth103.0,host_mac=6A:55:55:AE:74:BF;ifname=eth1,bridge=vmbr1 ,mac=1E:E7:AA:7A:1B:95,host_ifname=veth103.1,host_mac=DA:58: B6:B2:5B:E5 "
IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ipt_state iptable_nat ip_nat_ftp ipt_recent"
CAPABILITY=" NET_ADMIN:on"
DEVNODES="net/tun:rw "
DEVICES="c:10:200:rw "
I have found I think very similar problem here
forum.openvz.org/index.php?t=msg&goto=45326&&rch =ipsec#msg_45326
I have tried
net.ipv4.conf.all.disable_xfrm = 1
net.ipv4.conf.all.disable_policy = 1
but without success..
But my config is a little bit different - I have bridged interfaces in my container.
If you have any idea, please help..
Thanks, Petr
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
