Home » Mailing lists » Users » Access Cdrom, reboot and other questions
Access Cdrom, reboot and other questions [message #9083] |
Fri, 15 December 2006 20:46 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Romeo Theriault
Messages: 20 Registered: December 2006
|
Junior Member |
|
|
Hi, I have a program which needs to access a cdrom. What is the best way to
access a cdrom via a vps?
On another note, I noticed that from within a vps if I send the command
"reboot", the vps goes down but does not come back up. I need to start it
from the HN. It seems to me that this worked for me a few days ago. But I
recently upgraded to the recently released stable kernel. Is this a possible
cause?
Also, is it recommended to shutdown all of the vps's before doing a reboot
on the HN? I did a reboot today on the HN after installing the new kernel
and got to thinking I probably should have stopped the vps's first. Is this
true?
Thanks for any insight in these matters.
Romeo
|
|
|
|
|
Re: Access Cdrom, reboot and other questions [message #9111 is a reply to message #9103] |
Mon, 18 December 2006 17:21 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Romeo Theriault
Messages: 20 Registered: December 2006
|
Junior Member |
|
|
Thank you for your response. It is true I was not waiting long enough for
the reboots to actually happen, though upon looking at the cron file, it is
set to check every 5 minutes. Not a big deal, I can change it if I need to.
Though with the cdrom part of the question, upon your suggestion I set my
vps to access the cdrom like this:
vzctl set 104 --devices b:3:0:r --save
I found the 3 and 0 from doing a ls -l /dev/hda
So then I ssh'ed into vps 104 and tried mounting the cd with this:
mount /dev/hda /mnt/cdrom/
but I tells me I must specify the fs type, so I do:
mount -t iso9660 /dev/hda /mnt/cdrom/
And it tells me that iso9660 is not supported by the kernel. But I can mount
the cd just fine on the HW node without specifying a fs type.
Also, when you say "bindmount" do you mean just mount the cd under the vps's
dir's, like this:
mount /dev/had /vz/root/104/mnt/cdrom
Or does bindmount mean something else?
Am I missing something with the vzctl command?
Thanks again
Romeo
On 12/18/06 4:24 AM, "Kirill Korotaev" <dev@sw.ru> wrote:
> Romeo Theriault wrote:
>> Hi, I have a program which needs to access a cdrom. What is the best way to
>> access a cdrom via a vps?
> # vzctl set --devices
> or mount cdrom from host system and then bindmount to
> /vz/root/<VEID>/mnt/cdrom
>
>> On another note, I noticed that from within a vps if I send the command
>> "reboot", the vps goes down but does not come back up. I need to start it
>> from the HN. It seems to me that this worked for me a few days ago. But I
>> recently upgraded to the recently released stable kernel. Is this a possible
>> cause?
> check cron jobs on your host. cron job should check
> rebooted VEs every minute and start them back.
> Probably you have not waited for a minute :)
>
>> Also, is it recommended to shutdown all of the vps's before doing a reboot
>> on the HN? I did a reboot today on the HN after installing the new kernel
>> and got to thinking I probably should have stopped the vps's first. Is this
>> true?
> `service vz stop` does stop VEs first. So if you did a gracefull node reboot
> VEs should have stopped automatically (service vz is stopped on node
> shutdown).
> Sure, apps should be stopped first for gracefull applications shutdown.
> Otherwise some applications can be disappointed by broken/not-closed data
> files.
>
>> Thanks for any insight in these matters.
> You are welcome!
>
> Thanks,
> Kirill
|
|
|
Re: Access Cdrom, reboot and other questions [message #9112 is a reply to message #9111] |
Mon, 18 December 2006 17:33 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
dev
Messages: 1693 Registered: September 2005 Location: Moscow
|
Senior Member |
![5072133](/theme/ovz3/images/icq.png)
|
|
Romeo Theriault,
> Thank you for your response. It is true I was not waiting long enough for
> the reboots to actually happen, though upon looking at the cron file, it is
> set to check every 5 minutes. Not a big deal, I can change it if I need to.
>
> Though with the cdrom part of the question, upon your suggestion I set my
> vps to access the cdrom like this:
>
> vzctl set 104 --devices b:3:0:r --save
>
> I found the 3 and 0 from doing a ls -l /dev/hda
>
> So then I ssh'ed into vps 104 and tried mounting the cd with this:
> mount /dev/hda /mnt/cdrom/
>
> but I tells me I must specify the fs type, so I do:
> mount -t iso9660 /dev/hda /mnt/cdrom/
>
> And it tells me that iso9660 is not supported by the kernel. But I can mount
> the cd just fine on the HW node without specifying a fs type.
Oh, you are right. isofs is disabled by default in VE, since
it is a potential security risk.
You can apply the following patch to enable it:
http://download.openvz.org/contrib/kernel-patches/isofs.patc h
> Also, when you say "bindmount" do you mean just mount the cd under the vps's
> dir's, like this:
>
> mount /dev/had /vz/root/104/mnt/cdrom
> Or does bindmount mean something else?
you can do the above, thougho I actually meant:
# mount /dev/hda /mnt/cdrom
# mount --bind /mnt/cdrom /vz/root/104/mnt/cdrom
> Am I missing something with the vzctl command?
No :)
Kirill
|
|
|
Re: Access Cdrom, reboot and other questions [message #9418 is a reply to message #9112] |
Tue, 02 January 2007 15:29 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Romeo Theriault
Messages: 20 Registered: December 2006
|
Junior Member |
|
|
Hi, thanks for the isofs patch. I applied it to the srpm kernel and
recompiled the kernel. The compile went fine and the kernel installs fine
but I get the same error in a ve when I try to mount the cd.
I have attached the patch file that I used as well as the kernel-ovz.spec
file that I modified to recompile the kernel with the isofs.patch. The
isofs.patch file was placed directly in the SOURCES directory. Would someone
be able to look at what I did to see if I made a mistake or is there a
problem with the patch?
Thank you,
Romeo
On 12/18/06 12:40 PM, "Kirill Korotaev" <dev@sw.ru> wrote:
> Romeo Theriault,
>
>> Thank you for your response. It is true I was not waiting long enough for
>> the reboots to actually happen, though upon looking at the cron file, it is
>> set to check every 5 minutes. Not a big deal, I can change it if I need to.
>>
>> Though with the cdrom part of the question, upon your suggestion I set my
>> vps to access the cdrom like this:
>>
>> vzctl set 104 --devices b:3:0:r --save
>>
>> I found the 3 and 0 from doing a ls -l /dev/hda
>>
>> So then I ssh'ed into vps 104 and tried mounting the cd with this:
>> mount /dev/hda /mnt/cdrom/
>>
>> but I tells me I must specify the fs type, so I do:
>> mount -t iso9660 /dev/hda /mnt/cdrom/
>>
>> And it tells me that iso9660 is not supported by the kernel. But I can mount
>> the cd just fine on the HW node without specifying a fs type.
> Oh, you are right. isofs is disabled by default in VE, since
> it is a potential security risk.
> You can apply the following patch to enable it:
> http://download.openvz.org/contrib/kernel-patches/isofs.patc h
>
>> Also, when you say "bindmount" do you mean just mount the cd under the vps's
>> dir's, like this:
>>
>> mount /dev/had /vz/root/104/mnt/cdrom
>
>> Or does bindmount mean something else?
> you can do the above, thougho I actually meant:
> # mount /dev/hda /mnt/cdrom
> # mount --bind /mnt/cdrom /vz/root/104/mnt/cdrom
>
>> Am I missing something with the vzctl command?
> No :)
>
> Kirill
|
|
|
Re: Access Cdrom, reboot and other questions [message #9442 is a reply to message #9418] |
Wed, 03 January 2007 11:52 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) |
dev
Messages: 1693 Registered: September 2005 Location: Moscow
|
Senior Member |
![5072133](/theme/ovz3/images/icq.png)
|
|
Romeo,
1. please always report the exact messages you face.
2. check that iso9660 is available both in VE and in the host
with the command:
# cat /proc/filesystems
most likely you didn't load the module isofs:
# modprobe isofs
Thanks,
Kirill
> Hi, thanks for the isofs patch. I applied it to the srpm kernel and
> recompiled the kernel. The compile went fine and the kernel installs fine
> but I get the same error in a ve when I try to mount the cd.
>
> I have attached the patch file that I used as well as the kernel-ovz.spec
> file that I modified to recompile the kernel with the isofs.patch. The
> isofs.patch file was placed directly in the SOURCES directory. Would someone
> be able to look at what I did to see if I made a mistake or is there a
> problem with the patch?
>
> Thank you,
>
> Romeo
>
>
> On 12/18/06 12:40 PM, "Kirill Korotaev" <dev@sw.ru> wrote:
>
>
>>Romeo Theriault,
>>
>>
>>>Thank you for your response. It is true I was not waiting long enough for
>>>the reboots to actually happen, though upon looking at the cron file, it is
>>>set to check every 5 minutes. Not a big deal, I can change it if I need to.
>>>
>>>Though with the cdrom part of the question, upon your suggestion I set my
>>>vps to access the cdrom like this:
>>>
>>>vzctl set 104 --devices b:3:0:r --save
>>>
>>>I found the 3 and 0 from doing a ls -l /dev/hda
>>>
>>>So then I ssh'ed into vps 104 and tried mounting the cd with this:
>>>mount /dev/hda /mnt/cdrom/
>>>
>>>but I tells me I must specify the fs type, so I do:
>>>mount -t iso9660 /dev/hda /mnt/cdrom/
>>>
>>>And it tells me that iso9660 is not supported by the kernel. But I can mount
>>>the cd just fine on the HW node without specifying a fs type.
>>
>>Oh, you are right. isofs is disabled by default in VE, since
>>it is a potential security risk.
>>You can apply the following patch to enable it:
>> http://download.openvz.org/contrib/kernel-patches/isofs.patc h
>>
>>
>>>Also, when you say "bindmount" do you mean just mount the cd under the vps's
>>>dir's, like this:
>>>
>>>mount /dev/had /vz/root/104/mnt/cdrom
>>
>>>Or does bindmount mean something else?
>>
>>you can do the above, thougho I actually meant:
>># mount /dev/hda /mnt/cdrom
>># mount --bind /mnt/cdrom /vz/root/104/mnt/cdrom
>>
>>
>>>Am I missing something with the vzctl command?
>>
>>No :)
>>
>>Kirill
> ------------------------------------------------------------ ------------
>
|
|
|
Goto Forum:
Current Time: Sun Sep 01 00:41:31 GMT 2024
Total time taken to generate the page: 0.06048 seconds
|