OpenVZ Forum: Users » Kernel bug or hardware problem?

Home » Mailing lists » Users » Kernel bug or hardware problem?

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Kernel bug or hardware problem? [message #47064]

Tue, 03 July 2012 13:26

Antanas
Messages: 2
Registered: July 2012

Junior Member

Hello smart people,
http://i.imgur.com/XGxwn.jpg
Kernel bug or hardware problem? What do you think?
Thank you.

-Antanas

Report message to a moderator

Re: Kernel bug or hardware problem? [message #47147 is a reply to message #47064]

Wed, 11 July 2012 16:06

dowdle
Messages: 261
Registered: December 2005
Location: Bozeman, Montana

Senior Member

Antanas,

----- Original Message -----
> http://i.imgur.com/XGxwn.jpg
> Kernel bug or hardware problem? What do you think?

I'm not really that great at debugging kernel stuff but if I were, that image wouldn't really give me much to go on... so maybe the flip of a coin can answer your question.

TYL,
--
Scott Dowdle
704 Church Street
Belgrade, MT 59714
(406)388-0827 [home]
(406)994-3931 [work]

--
TYL, Scott Dowdle
Belgrade, Montana, USA

Report message to a moderator

venet and several interfaces in one CT [message #47183 is a reply to message #47147]

Tue, 17 July 2012 07:42

stealth
Messages: 17
Registered: June 2010

Junior Member

Hi there,

I have a CT with three interfaces, external (8.0.0.1), local (
192.168.0.1) and internal (10.0.0.1). How can I configure routing in
this case to use 192.168.0.1 for subnet 192.168.0.0/24 , 10.0.0.1 for
10.0.0.0/24 and 8.0.0.1 for other?Now I use network mask for this but
I'm not sure this is a right way.

Report message to a moderator

Re: venet and several interfaces in one CT [message #47185 is a reply to message #47183]

Tue, 17 July 2012 15:31

kir
Messages: 1645
Registered: August 2005
Location: Moscow, Russia

Senior Member

On Jul 17, 2012 11:46 AM, "Stealth" <st@overlogic.org> wrote:
>
> Hi there,
>
> I have a CT with three interfaces, external (8.0.0.1), local (
192.168.0.1) and internal (10.0.0.1). How can I configure routing in this
case to use 192.168.0.1 for subnet 192.168.0.0/24 , 10.0.0.1 for
10.0.0.0/24and 8.0.0.1 for other?Now I use network mask for this but
I'm not sure this
is a right way.

Just add IPs for all three networks to a CT (with proper masks) and you are
all set.

>
>
>
>
>
>
>

Kir Kolyshkin

http://static.openvz.org/userbars/openvz-developer.png

Report message to a moderator

Previous Topic:	Ubuntu 12.04 template issue (vzctl enter VEID hangs)
Next Topic:	routing from external through HN to loopback on CT

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Sep 01 02:37:30 GMT 2024

Total time taken to generate the page: 0.05708 seconds