| RHEL6 and stateful firewall inside container [message #45140] |
Wed, 01 February 2012 11:17  |
masse
Messages: 2
Registered: January 2010
|
Junior Member |
|
|
Hello users@openvz.org
I'm trying to upgrade our rhel5 based openvz servers to rhel6 but I got
problem with iptables. If I try to use firewall inside container, I can
load rules, but firewall rejects all incoming packets. Host is redhet-6
and container is centos-6. I tested with kernels
vzkernel-2.6.32-042stab044.17.x86_64
vzkernel-2.6.32-042stab048.1.x86_64
vzkernel-2.6.32-042stab049.2.x86_64
My firewall config
# Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
*mangle
:PREROUTING ACCEPT [2:381]
:INPUT ACCEPT [2:381]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [4:559]
:POSTROUTING ACCEPT [4:559]
COMMIT
# Completed on Wed Feb 1 13:05:26 2012
# Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [4:559]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT
# Completed on Wed Feb 1 13:05:26 2012
Is it know problem or is it my misconfiguration? Firewall on redhat-5 is
functioning fine.
--
Mikko Hirvonen <Mikko.V.Hirvonen@helsinki.fi>
Helsingin yliopisto / Tietotekniikkakeskus / Verkkopalvelut
|
|
|
|
|
|
| Re: RHEL6 and stateful firewall inside container [message #45144 is a reply to message #45143] |
Wed, 01 February 2012 12:41  |
Vasily Averin
Messages: 17
Registered: April 2008
|
Junior Member |
|
|
On 02/01/2012 04:39 PM, Vasily Averin wrote:
> Hi Mikko,
>
> 1) You need to enable conntrack support for container, it is disabled by default.
> IIRC following command should be enough to enable conntrack support for specified container only:
> # vzctl set <CTID> --iptables iptable_filter --iptables ip_conntrack --save
Sorry, I did not noticed that you're using mangle table too, so you need to add also "--iptables iptable_mangle" into command above.
> 2) Also you need to load all modules on the host before loading of rules inside container. Container cannot load modules, even indirectly. that's why loading of iptables rules failed inside container.
> we recommend to add all required modules into iptables service configuration on the host.
> on CentOS6 nodes you need to add all used modules into IPTABLES_MODULES variable in /etc/sysconfig/iptables-config file.
>
> thank you,
> Vasily Averin
>
> On 02/01/2012 03:17 PM, Mikko Vasili Hirvonen wrote:
>> Hello users@openvz.org
>>
>> I'm trying to upgrade our rhel5 based openvz servers to rhel6 but I got
>> problem with iptables. If I try to use firewall inside container, I can
>> load rules, but firewall rejects all incoming packets. Host is redhet-6
>> and container is centos-6. I tested with kernels
>>
>> vzkernel-2.6.32-042stab044.17.x86_64
>> vzkernel-2.6.32-042stab048.1.x86_64
>> vzkernel-2.6.32-042stab049.2.x86_64
>>
>> My firewall config
>> # Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
>> *mangle
>> :PREROUTING ACCEPT [2:381]
>> :INPUT ACCEPT [2:381]
>> :FORWARD ACCEPT [0:0]
>> :OUTPUT ACCEPT [4:559]
>> :POSTROUTING ACCEPT [4:559]
>> COMMIT
>> # Completed on Wed Feb 1 13:05:26 2012
>> # Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
>> *filter
>> :INPUT ACCEPT [0:0]
>> :FORWARD ACCEPT [0:0]
>> :OUTPUT ACCEPT [4:559]
>> -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
>> -A INPUT -p icmp -j ACCEPT
>> -A INPUT -i lo -j ACCEPT
>> -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
>> -A INPUT -j REJECT --reject-with icmp-host-prohibited
>> -A FORWARD -j REJECT --reject-with icmp-host-prohibited
>> COMMIT
>> # Completed on Wed Feb 1 13:05:26 2012
>>
>> Is it know problem or is it my misconfiguration? Firewall on redhat-5 is
>> functioning fine.
>>
>>
>
|
|
|
|
| Re: RHEL6 and stateful firewall inside container [message #45154 is a reply to message #45144] |
Thu, 02 February 2012 08:51 |
masse
Messages: 2
Registered: January 2010
|
Junior Member |
|
|
Thank you Vasily. It is functioning now. I saw it is documented in vzctl
man page too.
On 02/01/2012 02:41 PM, Vasily Averin wrote:
> On 02/01/2012 04:39 PM, Vasily Averin wrote:
>> Hi Mikko,
>>
>> 1) You need to enable conntrack support for container, it is disabled by default.
>> IIRC following command should be enough to enable conntrack support for specified container only:
>> # vzctl set <CTID> --iptables iptable_filter --iptables ip_conntrack --save
>
> Sorry, I did not noticed that you're using mangle table too, so you need to add also "--iptables iptable_mangle" into command above.
>
>> 2) Also you need to load all modules on the host before loading of rules inside container. Container cannot load modules, even indirectly. that's why loading of iptables rules failed inside container.
>> we recommend to add all required modules into iptables service configuration on the host.
>> on CentOS6 nodes you need to add all used modules into IPTABLES_MODULES variable in /etc/sysconfig/iptables-config file.
>>
>> thank you,
>> Vasily Averin
>>
>> On 02/01/2012 03:17 PM, Mikko Vasili Hirvonen wrote:
>>> Hello users@openvz.org
>>>
>>> I'm trying to upgrade our rhel5 based openvz servers to rhel6 but I got
>>> problem with iptables. If I try to use firewall inside container, I can
>>> load rules, but firewall rejects all incoming packets. Host is redhet-6
>>> and container is centos-6. I tested with kernels
>>>
>>> vzkernel-2.6.32-042stab044.17.x86_64
>>> vzkernel-2.6.32-042stab048.1.x86_64
>>> vzkernel-2.6.32-042stab049.2.x86_64
>>>
>>> My firewall config
>>> # Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
>>> *mangle
>>> :PREROUTING ACCEPT [2:381]
>>> :INPUT ACCEPT [2:381]
>>> :FORWARD ACCEPT [0:0]
>>> :OUTPUT ACCEPT [4:559]
>>> :POSTROUTING ACCEPT [4:559]
>>> COMMIT
>>> # Completed on Wed Feb 1 13:05:26 2012
>>> # Generated by iptables-save v1.4.7 on Wed Feb 1 13:05:26 2012
>>> *filter
>>> :INPUT ACCEPT [0:0]
>>> :FORWARD ACCEPT [0:0]
>>> :OUTPUT ACCEPT [4:559]
>>> -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
>>> -A INPUT -p icmp -j ACCEPT
>>> -A INPUT -i lo -j ACCEPT
>>> -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
>>> -A INPUT -j REJECT --reject-with icmp-host-prohibited
>>> -A FORWARD -j REJECT --reject-with icmp-host-prohibited
>>> COMMIT
>>> # Completed on Wed Feb 1 13:05:26 2012
>>>
>>> Is it know problem or is it my misconfiguration? Firewall on redhat-5 is
>>> functioning fine.
>>>
>>>
>>
>
--
Mikko Hirvonen <Mikko.V.Hirvonen@helsinki.fi>
Helsingin yliopisto / Tietotekniikkakeskus / Verkkopalvelut
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
