| Problems booting ovzkernel-2.6.8-022stab045.1 [message #384] |
Sat, 19 November 2005 08:59  |
wfischer Messages: 38 Registered: November 2005 Location: Austria/Germany |
Member |
From: *is4all.net
|
|
Hi,
I have a machine running CentOS 4.2, which runs sucessfully
ovzkernel-2.6.8-022stab044.1 (Note: 44.1!)
When I try to run ovzkernel-2.6.8-022stab045.1 (Note: 45.1!), I get a kernel panic during boot:
------------------snip------------------------
md: ... autorun DONE.
Creating root device
Mounting root filesystem
EXT3-fs: unable to read superblock
mount: error 22 mounting ext3
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic: Attempted to kill init!
------------------snip------------------------
I am using software-RAID 1 for all filesystems (created a simple mirror of two SATA discs).
As mentioned, the kernel downloaded from http://download.openvz.org/kernel/022stab044.1/ovzkernel-2.6 .8-022stab044.1.i686.rpm runs fine, but http://download.openvz.org/kernel/022stab045.1/ovzkernel-2.6 .8-022stab045.1.i686.rpm does not work.
A screenshot of the kernel panic (shown via the remote-manamgent-card of the machine) is attached.
regards,
Werner
|
|
|
|
|
| Re: Problems booting ovzkernel-2.6.8-022stab045.1 [message #400 is a reply to message #399 ] |
Mon, 21 November 2005 06:16   |
wfischer Messages: 38 Registered: November 2005 Location: Austria/Germany |
Member |
From: *is4all.net
|
|
Hello Vasily Averin,
thanks for your reply. I have attached the first part of the bootlog when booting with 022stab044.1. I have used the provided binary packages from http://download.openvz.org/kernel/022stab045.1/ovzkernel-2.6 .8-022stab045.1.i686.rpm - so the used initrd is from this RPM.
Unfortunately I can currently not setup remote access. Is the supplied information helpful?
greetings,
Werner Fischer
|
|
|
|
|
|
| Re: Problems booting ovzkernel-2.6.8-022stab045.1 [message #525 is a reply to message #401 ] |
Wed, 14 December 2005 05:16   |
wfischer Messages: 38 Registered: November 2005 Location: Austria/Germany |
Member |
From: *is4all.net
|
|
Hello Vasily Averin,
the problem still exists with stab50.1-smp kernel. To ensure that the problem is reproduceable at my server, I did the following:
-> installed CentOS 4.2 from scratch (with a single SATA disk, no software RAID this time)
-> installed ovzkernel-smp-2.6.8-022stab044.1.i686.rpm and booted it (works fine)
-> installed ovzkernel-smp-2.6.8-022stab050.1.i686.rpm and tried to boot it (didn't work again)
-> booted into ovzkernel-smp-2.6.8-022stab044.1.i686 again, and grabbed the files you requested:
2) send me /var/log/dmesg file
3) send me /var/log/messages.* files
4) send me initrd images both for 022stab044.1 kernel and for 022stab045.1 kernel (I attached the stab050.1 initrd image, 'cause I'm testing with 050.1/044.1 now)
I have attached the files. I have also included a screenshot of the kernel panic of stab050.1smp-kernel.
The dmesg and messages files should be clearly readable (because of the complete fresh installation, there is no old/confusing information in there).
Thank you very much for your efforts!
best regards,
Werner Fischer
PS: in the server we have the following Intel Mainboard: SE7221BK1-E (http://www.intel.com/design/servers/boards/SE7221BK1-E/)
|
|
|
|
|
| Re: Problems booting ovzkernel-2.6.8-022stab045.1 [message #538 is a reply to message #537 ] |
Fri, 16 December 2005 03:13   |
wfischer Messages: 38 Registered: November 2005 Location: Austria/Germany |
Member |
From: *is4all.net
|
|
Hello Vasily Averin,
thank you for your reply. Unfortunately changing to root=/dev/sda1 does not help - the kernel panic still occurs. I have attached the grub.conf files (the one before I did the modification, and the one after I did the modification).
I can setup remote access for you now, if it helps. Just let me know - and I'll send you the remote access data via the private mail function of the forum. We have a Peppercon eRIC remote management card installed, so you can also go into the BIOS, power on / power off the server remotely...
Thanks for your friendly assistance,
we appreciate it very much,
best regards,
Werner
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Problems booting ovzkernel-2.6.8-022stab045.1 [message #692 is a reply to message #596 ] |
Fri, 06 January 2006 14:36   |
phpfreak Messages: 47 Registered: January 2006 |
Member |
From: *thewebfreaks.net
|
|
This problem still exists with the ovzkernel-smp-2.6.8-022stab056.1.i686.rpm kernel. The error is below:
[root@vz1 install]# rpm -ihv ovzkernel-smp-2.6.8-022stab056.1.i686.rpm
warning: ovzkernel-smp-2.6.8-022stab056.1.i686.rpm: V3 DSA signature: NOKEY, key ID a7a1d4b6
Preparing... ########################################### [100%]
1:ovzkernel-smp ########################################### [100%]
WARNING: No module ata_piix found for kernel 2.6.8-022stab056.1-smp, continuing anyway
WARNING: No module mptscsih found for kernel 2.6.8-022stab056.1-smp, continuing anyway
WARNING: No module raid1 found for kernel 2.6.8-022stab056.1-smp, continuing anyway
Eric Rosebrock
http://www.serverpowered.com
http://www.hybodus.com
http://www.linuxforum.com
http://www.phpfreaks.com
|
|
|
|
|
|
|
|