Home » Mailing lists » Users » Re: Re: Debian libc update requres newer kernel ( was no subject)
| Re: Re: Debian libc update requres newer kernel ( was no subject) [message #42622] |
Fri, 06 May 2011 20:12  |
foxb
Messages: 12
Registered: December 2009
|
Junior Member |
|
|
Will that work...?
I do not know what functionality is required from kernel and is it backported to RHEL kernel.
Maybe I should just bite the bullet and try?!
Thanks
P.S. Putting Subject
>-------- Оригинално писмо --------
>От: tim Doyle
>Относно: Re: [Users] (no subject)
>До: users@openvz.org
>Изпратено на: Петък, 2011, Май 6 22:37:15 EEST
>It is possible to change the kernel version reported by OpenVZ here:
>
>/proc/sys/kernel/virt_osrelease
>
>http://forum.openvz.org/index.php?t=msg&goto=15144&
>
>
>--
>Timothy Doyle
>CEO
>Quantact Hosting Solutions, Inc.
>tim@quantact.com
>http://www.quantact.com
>
>
>On 05/06/2011 10:53 AM, Hristo Benev wrote:
>> Hi,
>>
>> I have following issue.
>> My Host is running CentOS
>> ============================================================
>> cat /etc/redhat-release
>> CentOS release 5.6 (Final)
>>
>> uname -a
>> Linux server 2.6.18-238.9.1.el5.028stab089.1PAE #1 SMP Thu Apr 14 14:38:02 MSD 2011 i686 athlon i386 GNU/Linux
>> ===========================================================
>>
>> and some guests are Debian
>>
>> ===========================================================
>> cat /etc/debian_version
>> wheezy/sid
>> ===========================================================
>>
>> Upgraded to Squeeze
>>
>> ==========================================================
>> cat /etc/apt/sources.list
>> deb http://ftp.de.debian.org/debian squeeze main contrib non-free
>> deb http://ftp.de.debian.org/debian-security squeeze/updates main contrib non-free
>> deb http://ftp.de.debian.org/debian unstable main non-free contrib
>> #deb http://www.backports.org/debian squeeze-backports main contrib non-free
>> deb http://mirrors.kernel.org/debian squeeze-updates main contrib
>> ============================================================ ================
>>
>> When I try to upgrade I get following
>>
>> ============================================================ ================
>> apt-get upgrade
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> You might want to run 'apt-get -f install' to correct these.
>> The following packages have unmet dependencies:
>> libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
>> libc6 : Depends: libc-bin (= 2.11.2-11) but 2.13-2 is installed
>> libc6-dev : Depends: libc6 (= 2.13-2) but 2.11.2-11 is installed
>> locales : Depends: glibc-2.13-1
>> nscd : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
>> E: Unmet dependencies. Try using -f.
>> ============================================================ ===============
>>
>> When using -f I get
>>
>> ============================================================ ==============
>> WARNING: this version of the GNU libc requires kernel version
>> 2.6.26 or later. Please upgrade your kernel before installing
>> glibc.
>>
>> The installation of a 2.6 kernel _could_ ask you to install a new libc
>> first, this is NOT a bug, and should *NOT* be reported. In that case,
>> please add lenny sources to your /etc/apt/sources.list and run:
>> apt-get install -t lenny linux-image-2.6
>> Then reboot into this new kernel, and proceed with your upgrade
>> dpkg: error processing /var/cache/apt/archives/libc6_2.13-2_i386.deb (--unpack):
>> subprocess new pre-installation script returned error exit status 1
>> configured to not write apport reports
>> Errors were encountered while processing:
>> /var/cache/apt/archives/libc6_2.13-2_i386.deb
>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>> ============================================================ ================
>>
>> So how to fix that?
>> CentOS does not have more recent kernel (official/stable)?!
>>
>> Thanks,
>>
>>
>>
|
|
|
|
| Re: Debian libc update requres newer kernel ( was no subject) [message #42625 is a reply to message #42622] |
Sat, 07 May 2011 19:20  |
|
|
On 05/07/2011 12:12 AM, Hristo Benev wrote:
>
> Will that work...?
>
> I do not know what functionality is required from kernel and is it backported to RHEL kernel.
>
> Maybe I should just bite the bullet and try?!
It should work, we have forward-ported all the features required by
newer distros.
More to say, latest vzctl (since 3.0.25) sets this on a per-CT basis,
using the table from
/etc/vz/osrelease.conf. If you run vzctl-3.0.25 or later, just add the
following line to this
file:
debian-6.0 2.6.32
I will fix it in vzctl-3.0.26.3 soon.
> Thanks
>
> P.S. Putting Subject
>
>
> >-------- Оригинално писмо --------
> >От: tim Doyle
> >Относно: Re: [Users] (no subject)
> >До: users@openvz.org
> >Изпратено на: Петък, 2011, Май 6 22:37:15 EEST
>
> >It is possible to change the kernel version reported by OpenVZ here:
> >
> >/proc/sys/kernel/virt_osrelease
> >
> >http://forum.openvz.org/index.php?t=msg&goto=15144&
> >
> >
> >--
> >Timothy Doyle
> >CEO
> >Quantact Hosting Solutions, Inc.
> >tim@quantact.com
> >http://www.quantact.com
> >
> >
> >On 05/06/2011 10:53 AM, Hristo Benev wrote:
> >> Hi,
> >>
> >> I have following issue.
> >> My Host is running CentOS
> >> ============================================================
> >> cat /etc/redhat-release
> >> CentOS release 5.6 (Final)
> >>
> >> uname -a
> >> Linux server 2.6.18-238.9.1.el5.028stab089.1PAE #1 SMP Thu Apr 14 14:38:02 MSD 2011 i686 athlon i386 GNU/Linux
> >> ===========================================================
> >>
> >> and some guests are Debian
> >>
> >> ===========================================================
> >> cat /etc/debian_version
> >> wheezy/sid
> >> ===========================================================
> >>
> >> Upgraded to Squeeze
> >>
> >> ==========================================================
> >> cat /etc/apt/sources.list
> >> deb http://ftp.de.debian.org/debian squeeze main contrib non-free
> >> deb http://ftp.de.debian.org/debian-security squeeze/updates main contrib non-free
> >> deb http://ftp.de.debian.org/debian unstable main non-free contrib
> >> #deb http://www.backports.org/debian squeeze-backports main contrib non-free
> >> deb http://mirrors.kernel.org/debian squeeze-updates main contrib
> >> ============================================================ ================
> >>
> >> When I try to upgrade I get following
> >>
> >> ============================================================ ================
> >> apt-get upgrade
> >> Reading package lists... Done
> >> Building dependency tree
> >> Reading state information... Done
> >> You might want to run 'apt-get -f install' to correct these.
> >> The following packages have unmet dependencies:
> >> libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
> >> libc6 : Depends: libc-bin (= 2.11.2-11) but 2.13-2 is installed
> >> libc6-dev : Depends: libc6 (= 2.13-2) but 2.11.2-11 is installed
> >> locales : Depends: glibc-2.13-1
> >> nscd : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
> >> E: Unmet dependencies. Try using -f.
> >> ============================================================ ===============
> >>
> >> When using -f I get
> >>
> >> ============================================================ ==============
> >> WARNING: this version of the GNU libc requires kernel version
> >> 2.6.26 or later. Please upgrade your kernel before installing
> >> glibc.
> >>
> >> The installation of a 2.6 kernel _could_ ask you to install a new libc
> >> first, this is NOT a bug, and should *NOT* be reported. In that case,
> >> please add lenny sources to your /etc/apt/sources.list and run:
> >> apt-get install -t lenny linux-image-2.6
> >> Then reboot into this new kernel, and proceed with your upgrade
> >> dpkg: error processing /var/cache/apt/archives/libc6_2.13-2_i386.deb (--unpack):
> >> subprocess new pre-installation script returned error exit status 1
> >> configured to not write apport reports
> >> Errors were encountered while processing:
> >> /var/cache/apt/archives/libc6_2.13-2_i386.deb
> >> E: Sub-process /usr/bin/dpkg returned an error code (1)
> >> ============================================================ ================
> >>
> >> So how to fix that?
> >> CentOS does not have more recent kernel (official/stable)?!
> >>
> >> Thanks,
> >>
> >>
> >>
Kir Kolyshkin
|
|
|
|
| Re: Re: Debian libc update requres newer kernel ( was no subject) [message #42639 is a reply to message #42625] |
Sun, 08 May 2011 12:39 |
foxb
Messages: 12
Registered: December 2009
|
Junior Member |
|
|
This solved the problem...
Thanks
>-------- Оригинално писмо --------
>От: Kir Kolyshkin
>Относно: Re: [Users] Debian libc update requres newer kernel ( was no subject)
>До: "users@openvz.org"
>Изпратено на: Събота, 2011, Май 7 22:20:24 EEST
>On 05/07/2011 12:12 AM, Hristo Benev wrote:
>>
>> Will that work...?
>>
>> I do not know what functionality is required from kernel and is it backported to RHEL kernel.
>>
>> Maybe I should just bite the bullet and try?!
>
>It should work, we have forward-ported all the features required by
>newer distros.
>
>More to say, latest vzctl (since 3.0.25) sets this on a per-CT basis,
>using the table from
>/etc/vz/osrelease.conf. If you run vzctl-3.0.25 or later, just add the
>following line to this
>file:
>
>debian-6.0 2.6.32
>
>I will fix it in vzctl-3.0.26.3 soon.
>
>> Thanks
>>
>> P.S. Putting Subject
>>
>>
>> >-------- Оригинално писмо --------
>> >От: tim Doyle
>> >Относно: Re: [Users] (no subject)
>> >До: users@openvz.org
>> >Изпратено на: Петък, 2011, Май 6 22:37:15 EEST
>>
>> >It is possible to change the kernel version reported by OpenVZ here:
>> >
>> >/proc/sys/kernel/virt_osrelease
>> >
>> >http://forum.openvz.org/index.php?t=msg&goto=15144&
>> >
>> >
>> >--
>> >Timothy Doyle
>> >CEO
>> >Quantact Hosting Solutions, Inc.
>> >tim@quantact.com
>> >http://www.quantact.com
>> >
>> >
>> >On 05/06/2011 10:53 AM, Hristo Benev wrote:
>> >> Hi,
>> >>
>> >> I have following issue.
>> >> My Host is running CentOS
>> >> ============================================================
>> >> cat /etc/redhat-release
>> >> CentOS release 5.6 (Final)
>> >>
>> >> uname -a
>> >> Linux server 2.6.18-238.9.1.el5.028stab089.1PAE #1 SMP Thu Apr 14 14:38:02 MSD 2011 i686 athlon i386 GNU/Linux
>> >> ===========================================================
>> >>
>> >> and some guests are Debian
>> >>
>> >> ===========================================================
>> >> cat /etc/debian_version
>> >> wheezy/sid
>> >> ===========================================================
>> >>
>> >> Upgraded to Squeeze
>> >>
>> >> ==========================================================
>> >> cat /etc/apt/sources.list
>> >> deb http://ftp.de.debian.org/debian squeeze main contrib non-free
>> >> deb http://ftp.de.debian.org/debian-security squeeze/updates main contrib non-free
>> >> deb http://ftp.de.debian.org/debian unstable main non-free contrib
>> >> #deb http://www.backports.org/debian squeeze-backports main contrib non-free
>> >> deb http://mirrors.kernel.org/debian squeeze-updates main contrib
>> >> ============================================================ ================
>> >>
>> >> When I try to upgrade I get following
>> >>
>> >> ============================================================ ================
>> >> apt-get upgrade
>> >> Reading package lists... Done
>> >> Building dependency tree
>> >> Reading state information... Done
>> >> You might want to run 'apt-get -f install' to correct these.
>> >> The following packages have unmet dependencies:
>> >> libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
>> >> libc6 : Depends: libc-bin (= 2.11.2-11) but 2.13-2 is installed
>> >> libc6-dev : Depends: libc6 (= 2.13-2) but 2.11.2-11 is installed
>> >> locales : Depends: glibc-2.13-1
>> >> nscd : Depends: libc6 (> 2.13) but 2.11.2-11 is installed
>> >> E: Unmet dependencies. Try using -f.
>> >> ============================================================ ===============
>> >>
>> >> When using -f I get
>> >>
>> >> ============================================================ ==============
>> >> WARNING: this version of the GNU libc requires kernel version
>> >> 2.6.26 or later. Please upgrade your kernel before installing
>> >> glibc.
>> >>
>> >> The installation of a 2.6 kernel _could_ ask you to install a new libc
>> >> first, this is NOT a bug, and should *NOT* be reported. In that case,
>> >> please add lenny sources to your /etc/apt/sources.list and run:
>> >> apt-get install -t lenny linux-image-2.6
>> >> Then reboot into this new kernel, and proceed with your upgrade
>> >> dpkg: error processing /var/cache/apt/archives/libc6_2.13-2_i386.deb (--unpack):
>> >> subprocess new pre-installation script returned error exit status 1
>> >> configured to not write apport reports
>> >> Errors were encountered while processing:
>> >> /var/cache/apt/archives/libc6_2.13-2_i386.deb
>> >> E: Sub-process /usr/bin/dpkg returned an error code (1)
>> >> ============================================================ ================
>> >>
>> >> So how to fix that?
>> >> CentOS does not have more recent kernel (official/stable)?!
>> >>
>> >> Thanks,
>> >>
>> >>
>> >>
|
|
|
|
|
|
| Re: Re: Debian libc update requres newer kernel ( was no subject) [message #42650 is a reply to message #42625] |
Mon, 09 May 2011 12:52 |
foxb
Messages: 12
Registered: December 2009
|
Junior Member |
|
|
Indeed, I have unstable enabled in my sources.
Thanks for pointing it out.
Hristo
>-------- Оригинално писмо --------
>От: Benoit Branciard
>Относно: Re: [Users] Debian libc update requres newer kernel ( was no subject)
>До: users@openvz.org
>Изпратено на: Понеделник, 2011, Май 9 11:05:12 EEST
>Le 07/05/2011 21:20, Kir Kolyshkin a écrit :
>> On 05/07/2011 12:12 AM, Hristo Benev wrote:
>>>
>>> Will that work...?
>>>
>>> I do not know what functionality is required from kernel and is it
>>> backported to RHEL kernel.
>>>
>>> Maybe I should just bite the bullet and try?!
>>
>> It should work, we have forward-ported all the features required by
>> newer distros.
>>
>> More to say, latest vzctl (since 3.0.25) sets this on a per-CT basis,
>> using the table from
>> /etc/vz/osrelease.conf. If you run vzctl-3.0.25 or later, just add the
>> following line to this
>> file:
>>
>> debian-6.0 2.6.32
>>
>> I will fix it in vzctl-3.0.26.3 soon.
>>
>
>
>Stock Debian 6.0 (Squeeze) doesn't require this, it runs libc6 2.11
>which doesn't depend on kernel version.
>We have several Squeeze containers running happily on RHEL5 OpenVZ
>kernel without tweaks (however latest 089.1 stable ovz kernel is highly
>recommanded since it corrects some serious bugs).
>
>I believe problem arose maybe because Hristo Benev had some
>testing/unstable packages installed before upgrading to Squeeze.
>
>
>--
>Benoit BRANCIARD
>Service InfraStructures (SIS) - Direction des Systèmes d'Information (DSI)
>Université Paris 1 Panthéon-Sorbonne
>Centre Pierre Mendès France
>B 406 - 90, rue de Tolbiac - 75634 Paris cedex 13 - France
>Tél : +33 1 44 07 89 68 - Fax : +33 1 44 07 89 66
>Accueil tél. : +33 1 44 07 89 65
>Assistance : assistance-dsi@univ-paris1.fr
>Web : http://dsi.univ-paris1.fr
>
>--
>Ce message a ete verifie par MailScanner
>pour des virus ou des polluriels et rien de
>suspect n'a ete trouve.
>
>
|
|
|
|
Goto Forum:
Current Time: Tue Apr 30 18:13:04 GMT 2024
Total time taken to generate the page: 0.01680 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
