OpenVZ Forum


Home » General » Support » Performance Question
Performance Question [message #10968] Sat, 10 March 2007 19:53 Go to next message
dietmar is currently offline  dietmar
Messages: 54
Registered: March 2007
Member
Hi all,

we have done some performance tests running our mail-gateway software on OpenVZ. OpenVZ is extremely fast compared to other solutions, but we still get a 20% performance loss compared to running native. Our benchmark put the server under extremely high load (50 postfix smtpd, 40 spamassassin, 40 postgres database connections, ...). The Benchmark measures the maximum throughput of mails (Mails/second).

Is that 20% loss normal, or is it possible to improve that?

- Dietmar
Re: Performance Question [message #10972 is a reply to message #10968] Sun, 11 March 2007 01:18 Go to previous messageGo to next message
rickb is currently offline  rickb
Messages: 368
Registered: October 2006
Senior Member
20% performance loss using Openvz isn't normal. Think of openvz as resource containers with tools to view container stats on the HN, and when a PID is in the context, it has many restrictions to "stay" in its context.

Other, true and heavier virtualization architectures such as vmware, xen, etc introduce an interface for the virtualized kernel to talk to the underlying HN. This is where a performance loss is induced.

20% is extremely high, and very unexpected.

Rick



-------------
Common Terms I post with: http://wiki.openvz.org/Category:Definitions

UBC. Learn it, love it, live it: http://wiki.openvz.org/Proc/user_beancounters
Re: Performance Question [message #10974 is a reply to message #10968] Sun, 11 March 2007 02:25 Go to previous messageGo to next message
JimL is currently offline  JimL
Messages: 116
Registered: February 2007
Senior Member
This is totally off the wall, but is it possible your application is sensitive to the amount of memory available and you have allocated less for the VE?

Jim.
Re: Performance Question [message #10999 is a reply to message #10968] Sun, 11 March 2007 12:38 Go to previous messageGo to next message
Vasily Tarasov is currently offline  Vasily Tarasov
Messages: 1345
Registered: January 2006
Senior Member
Hello,

we need some information from you:
1) What to what have you compared? I mean, have you compared VE0 to VE or VE to some other kernel (non OpenVZ)?
2) You should use absolutely the same binaries in VE and in VE0!
3) Disk layout is very pertinent.
4) Try to set all UBC limits to unlimited value. Even if you don't have failcounters it may be pertinent.

Vasily.
Re: Performance Question [message #11000 is a reply to message #10968] Sun, 11 March 2007 12:42 Go to previous messageGo to next message
dev is currently offline  dev
Messages: 1693
Registered: September 2005
Location: Moscow
Senior Member

What was the test?

- what environment do you refer to when refering to native? host system? Which OS/kernel etc.?
- during the test you used most likely different directories for storing emails etc. The fact is that HDD speed varies very much for disk beginning and end.
So to make results comparable you should do the following:
a) create a separate partition of size which will be used totally up (plus some small reserve)
b) mount this partition to /var/spool when testing host environment and /vz/root/VEID/var/spool when testing VE.
This will guarantee that the same physical sectors of HDD will be used in both tests.
- set VE UBC setting to unlimited. This will prevent resource shortages during the test.

There can be other tunings done and checked for (e.g. mounting /vz with noatime), but w/o test case and test procedure it is hard to advise.


http://static.openvz.org/userbars/openvz-developer.png
Re: Performance Question [message #11040 is a reply to message #11000] Mon, 12 March 2007 12:45 Go to previous messageGo to next message
dietmar is currently offline  dietmar
Messages: 54
Registered: March 2007
Member
dev wrote on Sun, 11 March 2007 07:42

What was the test?


You can find our OpenVZ template at:

http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/deb ian-3.1-proxmox-mailgateway.tar.gz

Its an OpenVZ template for our Mail Gateway software appliance.

The test was simply sending several hundred testmails to the system, doing virus an spam filtering. I can send you the test scripts.

Quote:


- what environment do you refer to when refering to native? host system? Which OS/kernel etc.?


debian/2.6.18-3
Quote:


- during the test you used most likely different directories for storing emails etc. The fact is that HDD speed varies very much for disk beginning and end.
So to make results comparable you should do the following:
a) create a separate partition of size which will be used totally up (plus some small reserve)
b) mount this partition to /var/spool when testing host environment and /vz/root/VEID/var/spool when testing VE.
This will guarantee that the same physical sectors of HDD will be used in both tests.


Do you think that explains 15-20% Performance loss? Anyways, I cant change that for several reasons.

Quote:


- set VE UBC setting to unlimited. This will prevent resource shortages during the test.

There can be other tunings done and checked for (e.g. mounting /vz with noatime), but w/o test case and test procedure it is hard to advise.



I already set UBC settings to unlimited, but still get 15% less performance (which is quite good compared to other VM technologies)

I wonder if someone else did performance tests on comparable systems (mail server, mail gateways) running on OpenVZ?

Re: Performance Question [message #11042 is a reply to message #10999] Mon, 12 March 2007 12:53 Go to previous messageGo to next message
dietmar is currently offline  dietmar
Messages: 54
Registered: March 2007
Member
Vasily Tarasov wrote on Sun, 11 March 2007 07:38

4) Try to set all UBC limits to unlimited value. Even if you don't have failcounters it may be pertinent.


I generated a reasonable default using vzsplit -n 1, then I set memory to 2GB:

VMGUARPAGES="524288:2147483647"
OOMGUARPAGES="524288:2147483647"
PRIVVMPAGES="524288:2147483647"

or whats the best way to set no(unlimited) UBC limits?

- Dietmar
Re: Performance Question [message #11044 is a reply to message #11040] Mon, 12 March 2007 13:13 Go to previous messageGo to next message
dev is currently offline  dev
Messages: 1693
Registered: September 2005
Location: Moscow
Senior Member

dietmar wrote on Mon, 12 March 2007 15:45

dev wrote on Sun, 11 March 2007 07:42

What was the test?


You can find our OpenVZ template at:

http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/deb ian-3.1-proxmox-mailgateway.tar.gz

Its an OpenVZ template for our Mail Gateway software appliance.

The test was simply sending several hundred testmails to the system, doing virus an spam filtering. I can send you the test scripts.



It would be great, since then we could try to reproduce.

dietmar wrote on Mon, 12 March 2007 15:45



Quote:


- what environment do you refer to when refering to native? host system? Which OS/kernel etc.?


debian/2.6.18-3
Quote:


- during the test you used most likely different directories for storing emails etc. The fact is that HDD speed varies very much for disk beginning and end.
So to make results comparable you should do the following:
a) create a separate partition of size which will be used totally up (plus some small reserve)
b) mount this partition to /var/spool when testing host environment and /vz/root/VEID/var/spool when testing VE.
This will guarantee that the same physical sectors of HDD will be used in both tests.


Do you think that explains 15-20% Performance loss? Anyways, I cant change that for several reasons.



It can account easily for almost double performance variations in some cases. Though I don't claim it is 100% the issue in your test case, just trying to provide more likely reasons for performance differences and which we can check for.

dietmar wrote on Mon, 12 March 2007 15:45



Quote:


- set VE UBC setting to unlimited. This will prevent resource shortages during the test.

There can be other tunings done and checked for (e.g. mounting /vz with noatime), but w/o test case and test procedure it is hard to advise.



I already set UBC settings to unlimited, but still get 15% less performance (which is quite good compared to other VM technologies)
dietmar wrote on Mon, 12 March 2007 15:45



I'm pretty sure it can be optimized further out. It's just not that easy to find out the bottleneck remotely Sad maybe it's possible to get an access to your testbed?
Do you use 100Mb or 1Gb link?

I wonder if someone else did performance tests on comparable systems (mail server, mail gateways) running on OpenVZ?







http://static.openvz.org/userbars/openvz-developer.png

[Updated on: Mon, 12 March 2007 13:14]

Report message to a moderator

Re: Performance Question [message #11048 is a reply to message #11044] Mon, 12 March 2007 14:37 Go to previous messageGo to next message
dietmar is currently offline  dietmar
Messages: 54
Registered: March 2007
Member
Here ist the test script (perl). I tried to add the necessary documentation, but just ask if you have questions about howto setup the mail gateway.

- Dietmar
  • Attachment: perftest.pl
    (Size: 5.58KB, Downloaded 339 times)
Re: Performance Question [message #11051 is a reply to message #11044] Mon, 12 March 2007 14:46 Go to previous messageGo to next message
dietmar is currently offline  dietmar
Messages: 54
Registered: March 2007
Member
If you test on native hardware you need to download and install our iso image (warning: formats the Harddisk when installing):

http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/pro xmox-mailgateway_1.7.iso

(or the vmware appliance if you want to test that).

Also apply the hotfix after installation (use the web interface to apply the hotfix (Server/Updates).

http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/hot fix_1.7-1702.bin


Re: Performance Question [message #11053 is a reply to message #11051] Mon, 12 March 2007 16:10 Go to previous message
dev is currently offline  dev
Messages: 1693
Registered: September 2005
Location: Moscow
Senior Member

ok. will try to reproduce.


http://static.openvz.org/userbars/openvz-developer.png
Previous Topic: Running VEs on a Strato Hostsystem with natted public->private ip-addresses
Next Topic: *SOLVED* In VE User Quotas: No?
Goto Forum:
  


Current Time: Tue Dec 03 06:21:46 GMT 2024

Total time taken to generate the page: 0.13756 seconds