Home » General » Support » *SOLVED* Error 13: Invalid executable or unsupported format ???
Re: Error 13: Invalid executable or unsupported format ??? [message #8888 is a reply to message #8887] |
Fri, 08 December 2006 17:17 |
arnaudsj
Messages: 9 Registered: December 2006
|
Junior Member |
|
|
I think you are on to something:
# file /boot/vmlinux-2.6.9-023stab032.1-smp
/boot/vmlinux-2.6.9-023stab032.1-smp: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), statically linked, not stripped
# file /boot/vmlinuz-2.6.9-42.0.3.plus.c4smp
/boot/vmlinuz-2.6.9-42.0.3.plus.c4smp: x86 boot sector
Any other of my kernels listed in grub.conf below are showing this property (x86 boot sector)
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/Linux/CentOS
# initrd /initrd-version.img
#boot=/dev/sda
default=3
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
serial --unit=0 --speed=9600
terminal --timeout=2 serial console
title CentOS (2.6.9-023stab032.1-smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-023stab032.1-smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-023stab032.1-smp.img
title CentOS (2.6.9-42.0.3.plus.c4)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.3.plus.c4 ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.3.plus.c4.img
title CentOS (2.6.9-42.0.3.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.3.EL ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.3.EL.img
title CentOS (2.6.9-42.0.3.plus.c4smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.3.plus.c4smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.3.plus.c4smp.img
title CentOS (2.6.9-42.0.2.plus.c4)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.2.plus.c4 ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.2.plus.c4.img
title CentOS (2.6.9-42.0.2.plus.c4smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.2.plus.c4smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.2.plus.c4smp.img
title CentOS (2.6.9-42.0.2.ELsmp)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.2.ELsmp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.2.ELsmp.img
title CentOS (2.6.9-42.0.2.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.2.EL ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.2.EL.img
title CentOS (2.6.9-34.107.plus.c4smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-34.107.plus.c4smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-34.107.plus.c4smp.img
title Gentoo Linux (2.6.14-r5 lvm2)
root (hd0,0)
kernel /kernel-genkernel-x86_64-2.6.14-gentoo-r5 udev dolvm2 root=/dev/ram0 real_root=/dev/Linux/Gentoo init=/linuxrc lvmraid=/dev/md0 video=vesafb:ywrap,mtrr,1024x768-16@85 splash=silent,theme:emergence
initrd /initramfs-genkernel-x86_64-2.6.14-gentoo-r5
title Windows XP (32bit)
rootnoverify (hd0,2)
chainloader +1
Also for some reason menu.lst is showing some quite different things... Not sure what happened (I wonder if it because I had installed Ubuntu a few months ago and it overwrote the grub config from Centos...
# cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sdb3 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
serial --unit=0 --speed=9600
terminal --timeout=2 serial console
splashimage=(hd0,0)/grub/splash.xpm.gz
title CentOS (2.6.9-42.0.3.plus.c4smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.3.plus.c4smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.3.plus.c4smp.img
savedefault
boot
title OpenVZ (2.6.9 x64 SMP)
root (hd0,0)
kernel /vmlinux-2.6.9-023stab032.1-smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-023stab032.1-smp.img
boot
title CentOS new, kernel 2.6.9-42.0.2.ELsmp
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.2.ELsmp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-42.0.2.ELsmp.img
boot
title CentOS (2.6.9-34.107.plus.c4smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-34.107.plus.c4smp ro root=/dev/Linux/CentOS clock=pmtmr noapic nolapic console=tty1 console=ttyS1,9600
initrd /initrd-2.6.9-34.107.plus.c4smp.img
boot
title Ubuntu, kernel 2.6.15-26-amd64-generic
root (hd0,0)
kernel /vmlinuz-2.6.15-26-amd64-generic root=/dev/sdb3 ro quiet splash
initrd /initrd.img-2.6.15-26-amd64-generic
boot
title Ubuntu, kernel 2.6.15-26-amd64-generic (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.15-26-amd64-generic root=/dev/sdb3 ro single
initrd /initrd.img-2.6.15-26-amd64-generic
boot
title CentOS, kernel 2.6.9-34.107.plus.c4smp
root (hd0,0)
kernel /vmlinuz-2.6.9-34.107.plus.c4smp root=/dev/sdb3 ro quiet splash
boot
title CentOS, kernel 2.6.9-34.107.plus.c4smp (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.9-34.107.plus.c4smp root=/dev/sdb3 ro single
boot
title CentOS, kernel 2.6.9-34.ELsmp
root (hd0,0)
kernel /vmlinuz-2.6.9-34.ELsmp root=/dev/sdb3 ro quiet splash
boot
title CentOS, kernel 2.6.9-34.ELsmp (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.9-34.ELsmp root=/dev/sdb3 ro single
boot
title CentOS, kernel 2.6.9-34.EL
root (hd0,0)
kernel /vmlinuz-2.6.9-34.EL root=/dev/sdb3 ro quiet splash
boot
title CentOS, kernel 2.6.9-34.EL (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.9-34.EL root=/dev/sdb3 ro single
boot
title Ubuntu, memtest86+
root (hd0,0)
kernel /memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
...
|
|
|
Goto Forum:
Current Time: Sun Oct 06 11:48:12 GMT 2024
Total time taken to generate the page: 0.04491 seconds
|