Re: IP auf VServer leiten [message #48731 is a reply to message #47577] |
Mon, 12 November 2012 20:30 |
SunnyWorks
Messages: 2 Registered: November 2012
|
Junior Member |
|
|
Hallo Thorsten,
schade, dass es hier nicht weiter ging -> ich habe nämlich (meines Erachtens) das gleiche Problem (OpenVZ Web Panel).
Schlussendlich möchte ich daran anknüpfen:
Quote:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
inet 10.1.2.1/32 scope global eth0
inet 11.1.2.1/32 scope global eth0:1
inet 11.1.2.2/32 scope global eth0:2
inet 11.1.2.3/32 scope global eth0:3
inet 11.1.2.4/32 scope global eth0:4
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
inet 12.1.2.1/30 scope global eth1
Mir fehlen also die venet-Einträge, oder?
Venet sollte aber geladen sein, zumindest zeigt lsmod | grep vznetdev folgendes an:
Quote:
vznetdev 17967 2
vzmon 16317 5 vzethdev,vznetdev,vzrst,vzcpt
vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon
Ich komme aus den Gastsystemen weder raus noch rein...
Danke vorab für Deine Hilfe und Gruß
Kai
life is hard - but works
|
|
|