OpenVZ Forum: Users » Is there a stable OpenVZ kernel, and which should be fit for production

Home » Mailing lists » Users » Is there a stable OpenVZ kernel, and which should be fit for production

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: Is there a stable OpenVZ kernel, and which should be fit for production [message #44202 is a reply to message #44201]

Thu, 24 November 2011 12:15

Dariush Pietrzak
Messages: 40
Registered: November 2007

Member

> Just out of curiousity i use my kernel crash-test setup to test with
> "stress" and "bonnie". I simply use the OpenVZ-Kernel with two
> container (ubuntu-10.04) and let one run stress and the other
> bonnie. The load is at 15 but the machine is humming along since
> around 4 hours...
With such low load we also couldn't crash it in timely matter.
With lightly loaded machines we endured months without crash.

I use this:
stress -c 22 -i 24 -m 8 -d 20 --hdd-bytes 10G
and this:
while (true)
do
bonnie++ -d /fs/v/bonnie/ -c 8 -b -f -u root
echo next
done
in parallel, I don't even have to run it inside containers.
(test machine is single 4-core Xeon E5320, with 4G ram and two 146G raid 1s
joined by lvm. With loadavg 50-80 we get crashes after few hours).

> Is it possible that your problem arise from the io devices used?

Possible, but unlikely, we first noticed crashed using FC devices, and
then moved to testing on small P400i with 256M ram. One of the most affected
machines used P410i controller, which is very similiar and the same generation
as P400i.
I can re-test on FC again.

And while IO load seems to be neccessary to cause crash, resulting oops-es
are similiar, very often account_system_time appears:

[38766.228063] panic occurred, switching back to text console
[38766.228063] BUG: scheduling while atomic: stress/1962/0x10000100
(this is identical to what we saw in production, only with 'java' instead
of 'stress')

[38766.227505] BUG: unable to handle kernel paging request at 0000000000021300
[38766.227509] IP: [<ffffffff81050ec4>] update_curr+0x154/0x200
[38766.227514] PGD 12c7b4067 PUD 12c7b5067 PMD 0

[38764.623677] BUG: unable to handle kernel paging request at 000000000001e440
[38764.623677] IP: [<ffffffff814c8efe>] _spin_lock+0xe/0x30

[38764.599189] BUG: unable to handle kernel paging request at 0000000000019550
[38764.599189] IP: [<ffffffff8105674f>] account_system_time+0xaf/0x1f0

[ 1876.747809] BUG: unable to handle kernel paging request at 00000006000000bd
[ 1876.747815] IP: [<ffffffff8105a4fe>] select_task_rq_fair+0x32e/0xa20

[ 1515.270063] BUG: unable to handle kernel paging request at 00000004047118e0
[ 1515.270063] IP: [<ffffffff81050aad>] task_rq_lock+0x4d/0xa0

best regards, Eyck
--
Key fingerprint = 40D0 9FFB 9939 7320 8294 05E0 BCC7 02C4 75CC 50D9
Total Existance Failure

Report message to a moderator

[Message index]

		Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Tue, 22 November 2011 08:52
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: kir on Tue, 22 November 2011 10:34
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Wed, 23 November 2011 10:52
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Wed, 23 November 2011 12:31
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: kir on Wed, 23 November 2011 14:42
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Wed, 23 November 2011 15:21
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Wed, 23 November 2011 16:59
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: kir on Wed, 23 November 2011 17:13
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Wed, 23 November 2011 17:25
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: kir on Wed, 23 November 2011 20:29
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Sharp on Wed, 23 November 2011 17:20
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Thu, 24 November 2011 09:44
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Thu, 24 November 2011 11:27
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Thu, 24 November 2011 12:15
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: MailingListe on Fri, 25 November 2011 09:39
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Fri, 25 November 2011 13:26
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Dariush Pietrzak on Wed, 30 November 2011 09:34
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Stephen Balukoff on Thu, 01 December 2011 22:03
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Stephen Balukoff on Thu, 01 December 2011 22:06
		Re: Is there a stable OpenVZ kernel, and which should be fit for production By: Stephen Balukoff on Fri, 02 December 2011 00:39

Previous Topic:	openvz CT migration filesystem on share storage
Next Topic:	OpenVZ Container with a PCI ISDN Card

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 22 06:23:53 GMT 2025

Total time taken to generate the page: 0.13223 seconds