OpenVZ Forum: Users » How to assign a public IP to a VE ?

Home » Mailing lists » Users » How to assign a public IP to a VE ?

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: How to assign a public IP to a VE ? [message #43913 is a reply to message #43912]

Sat, 29 October 2011 02:29

Gary Wallis
Messages: 15
Registered: July 2011

Junior Member

Sounds like a general networking vlan and/or bonding issue. But make
sure that these /etc/vz/vz.conf parameters are set correctly:

# The name of the device whose IP address will be used as source IP for CT.
# By default automatically assigned.
#VE_ROUTE_SRC_DEV="eth0"

# Controls which interfaces to send ARP requests and modify APR tables on.
#NEIGHBOUR_DEVS=detect

## Fail if there is another machine in the network with the same IP
ERROR_ON_ARPFAIL="no"

Also check the output of

# route -n

Make sure default gw (0.0.0.0) is on the correct device and that this
device is plugged into the correct switch port.

Report message to a moderator

[Message index]

		How to assign a public IP to a VE ? By: U.Mutlu on Sat, 29 October 2011 00:39
		Re: How to assign a public IP to a VE ? By: Gary Wallis on Sat, 29 October 2011 02:29
		Re: How to assign a public IP to a VE ? By: U.Mutlu on Sat, 29 October 2011 08:51
		Re: How to assign a public IP to a VE ? (SOLVED) By: U.Mutlu on Sun, 30 October 2011 12:12
		Re: How to assign a public IP to a VE ? (SOLVED) By: U.Mutlu on Sun, 30 October 2011 16:04

Previous Topic:	Using DRBD inside containers
Next Topic:	check_openvz_beans: Nagios Plugin for OpenVZ beancounters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 04 03:55:40 GMT 2026

Total time taken to generate the page: 0.07962 seconds