OpenVZ Forum


Home » Mailing lists » Users » vps from different Hardware Nodes can't access each others
Re: vps from different Hardware Nodes can't access each others [message #42334 is a reply to message #42333] Fri, 01 April 2011 11:31 Go to previous messageGo to previous message
Marc Olive is currently offline  Marc Olive
Messages: 7
Registered: March 2011
Junior Member
On Friday 01 April 2011 13:22:21 John Spanos wrote:
> Hello,

Hello,

> Thanx for your help.
>
> You are right with the solution you suggest me but the description of my
> problem was with fake ip addresses, my real problem is with real ip
> addresses and the subnets I have are not sequent. So think like we have
> ips from 192.168.1.0/24 and 10.10.10.0/24
>
> Any other suggestions??

So you have something like:

HN1: 192.168.1.1/24
VS1_HN1: 192.168.1.11/24
VS2_HN1: 192.168.1.12/24
VS3_HN1: 192.168.1.13/24
VS4_HN1: 192.168.1.14/24

HN2: 10.0.0.1/24
VS1_HN2: 10.0.0.11/24
VS2_HN2: 10.0.0.12/24
VS3_HN2: 10.0.0.13/24
VS4_HN2: 10.0.0.14/24

You can ping from VS1_HN1 to any VSx_HN1 and VSx_HN2, all it's fine.
You can ping from VS3_HN1 to any VSx_HN1 but only to two of VSx_HN2?
What have this VS3 different from VS1? It's the same type of ethernet than VS1
one (venet or veth, both)? What about interface's config differences besides the
IP? Did you checked the routing tables of HN and VS?

Regards,

--

Marc Olivé
Blau Advisors

marc.olive@blauadvisors.com

C/ Molí de Guasch, 10 baixos 1a,
43440 L’Espluga de Francolí (Tarragona)
Tel. +34 977 870 702
Tel i Fax. + 34 977 870 507

www.blauadvisors.com
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: . tar.gz.tar.gz not found while trying to create a container
Next Topic: Creating an openVZ image of RHEL5.3
Goto Forum:
  


Current Time: Fri Aug 15 21:04:00 GMT 2025

Total time taken to generate the page: 0.31250 seconds