OpenVZ Forum


Home » International » Russian » Проблема роутинга в 2.6.18-194.26.1.el5.028stab070.12
Проблема роутинга в 2.6.18-194.26.1.el5.028stab070.12 [message #41099] Wed, 17 November 2010 12:32 Go to previous message
zvv2 is currently offline  zvv2
Messages: 4
Registered: January 2010
Junior Member
После проблем с монтированием USB в stab070.2 - откатился на stab069.6 и жил на нем до сих под, пока не решил обновиться до зарелизенного сегодня stab070.12

Итак, что тут - что:
нода: 192.168.101.2
гейт: 192.168.101.11
ве-шки: 192.168.101.101 - 192.168.101.106
рабочий интерфейс: eth1


Грузимся с ядром 2.6.18-194.26.1.el5.028stab070.12
[root@t2 ~]# ip ro sh
192.168.101.106 dev venet0  scope link  src 192.168.101.2
192.168.101.105 dev venet0  scope link  src 192.168.101.2
192.168.101.12 dev eth0  scope link
192.168.101.103 dev venet0  scope link  src 192.168.101.2
192.168.101.102 dev venet0  scope link  src 192.168.101.2
192.168.101.101 dev venet0  scope link  src 192.168.101.2
192.168.101.0/24 dev eth1  proto kernel  scope link  src 192.168.101.2
169.254.0.0/16 dev eth1  scope link
default via 192.168.101.11 dev eth1

[root@t2 ~]# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.101.106 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.105 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.12  0.0.0.0         255.255.255.255 UH        0 0          0 eth0
192.168.101.103 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.102 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.101 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.0   0.0.0.0         255.255.255.0   U         0 0          0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth1
0.0.0.0         192.168.101.11  0.0.0.0         UG        0 0          0 eth1

[root@t2 ~]# cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.101.11   0x1         0x2         00:22:15:27:39:36     *        eth1

[root@t2 ~]# vzctl enter 106
entered into CT 106
[root@ns1 /]# host openvz.org
;; connection timed out; no servers could be reached


Видно, что таблица arp пустая, соединение наружу из VE (команда host) не проходит.


Ничего не меняем, перезагружаемся с ядром 2.6.18-194.3.1.el5.028stab069.6
[root@t2 ~]# ip ro sh
192.168.101.106 dev venet0  scope link  src 192.168.101.2
192.168.101.105 dev venet0  scope link  src 192.168.101.2
192.168.101.12 dev eth0  scope link
192.168.101.103 dev venet0  scope link  src 192.168.101.2
192.168.101.102 dev venet0  scope link  src 192.168.101.2
192.168.101.101 dev venet0  scope link  src 192.168.101.2
192.168.101.0/24 dev eth1  proto kernel  scope link  src 192.168.101.2
169.254.0.0/16 dev eth1  scope link
default via 192.168.101.11 dev eth1

[root@t2 ~]# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.101.106 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.105 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.12  0.0.0.0         255.255.255.255 UH        0 0          0 eth0
192.168.101.103 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.102 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.101 0.0.0.0         255.255.255.255 UH        0 0          0 venet0
192.168.101.0   0.0.0.0         255.255.255.0   U         0 0          0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth1
0.0.0.0         192.168.101.11  0.0.0.0         UG        0 0          0 eth1

[root@t2 ~]# cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.101.11   0x1         0x2         00:22:15:27:39:36     *        eth1
192.168.101.106  0x1         0xc         00:00:00:00:00:00     *        eth1
192.168.101.105  0x1         0xc         00:00:00:00:00:00     *        eth1
192.168.101.103  0x1         0xc         00:00:00:00:00:00     *        eth1
192.168.101.102  0x1         0xc         00:00:00:00:00:00     *        eth1
192.168.101.101  0x1         0xc         00:00:00:00:00:00     *        eth1

# vzctl enter 106
entered into CT 106
[root@ns1 /]# host openvz.org
openvz.org has address 64.131.90.7
openvz.org mail is handled by 10 mx1.parallels.com.
openvz.org mail is handled by 20 mx2.parallels.com.


cat /proc/net/arp нормальный, соединение наружу из VE работает.

Что делать? Smile

Report message to a moderator

[Message index]
 
Read Message
Read Message
Previous Topic: Пожалуста удaлить!
Next Topic: проблемы с рестартом контейнера
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jan 16 01:18:46 GMT 2026

Total time taken to generate the page: 0.44078 seconds
Powered by FUDforum Powered by Virtuozzo Containers