Hi !
Thanks for your answer. So I'm trying what you told me and I still can't get network in my VE.
On the master host, I pull off the VLAN and br0.110 interface to let only br0.
Then I configured the VE to be on br0 interface :
CONFIG_CUSTOMIZED="yes"
VZHOSTBR="br0"
IP_ADDRESS=""
NAMESERVER="192.168.100.3"
NETIF="ifname=eth0,mac=00:18:51:78:46:C8,host_ifname=veth103.0,host_mac=00:18:51:B1:78:DE"
Then in my VE interfaces, here is what I've got :
auto lo eth0.110
iface lo inet loopback
iface eth0.110 inet static
address 192.168.110.10
netmask 255.255.255.0
#gateway 192.168.110.254
#network 192.168.110.0
broadcast 102.168.110.255
vlan_raw_device eth0
And to finish, to validate the vlan config :
> cat /proc/net/vlan/eth0.110
eth0.110 VID: 110 REORDER_HDR: 1 dev->priv_flags: 1
total frames received 1
total bytes received 46
Broadcast/Multicast Rcvd 0
total frames transmitted 15
total bytes transmitted 2086
total headroom inc 0
total encap on xmit 15
Device: eth0
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESSS priority Mappings:
I can't ping my router (of course on the same subnet) with this VE but I can from another host not in this VLAN for example.
I'm still wondering why it doesn't work as it looks like so simple on the documentation.
Thanks
[Updated on: Sat, 12 June 2010 16:31]
Report message to a moderator
OpenVZ Forum
Members
Search
Help
Register
Login
Home
