OpenVZ Forum: Russian » [solved] eth0 in VE

Home » International » Russian » [solved] eth0 in VE

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: [solved] eth0 in VE [message #34745 is a reply to message #34743]

Fri, 30 January 2009 08:56

maratrus
Messages: 1495
Registered: August 2007
Location: Moscow

Senior Member

Здравствуйте,

Quote:

Не могли бы Вы помочь мне настроить OpenVZ перенаправления для моего сервера?

Не могли бы вы объяснить что значит "OpenVZ перенаправления"? Чтобы заработал интерфейс внутри VE?

Quote:

Пиво гарантирую.

У вас, судя по выводу пачка IP адресов. Давайте сначала разберемся с одним, например, 8X.25.71.219.

Quote:

4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:40:d0:bf:e2:cf brd ff:ff:ff:ff:ff:ff
inet 8X.25.71.219/26 brd 8X.25.71.255 scope global eth0
inet 8X.25.76.244/25 brd 8X.25.76.255 scope global eth0:0
inet 8X.25.76.243/25 brd 8X.25.76.255 scope global secondary

Во-первых, уберите все alias с HN!
Оставьте на HN только один рабочий IP адрес, не совпадающий с тем, который вы хотите поставить внутрь VE!

Вы читали wiki страничку? Если кратко, то необходимо выполнить следующую последовательность (начинаем с самого начального состояния):

(на HN)
# vzctl set 244 --netif_add eth0 --save // это вы уже сделали
# ifconfig veth244.0 0
# echo 1 > /proc/sys/net/ipv4/conf/veth244.0/forwarding
# echo 1 > /proc/sys/net/ipv4/conf/veth244.0/proxy_arp
# echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
# echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
# vzctl enter 244
(внутри VE)
# ifconfig eth0 0
# ifconfig eth0 8X.25.71.219/26
# ip route add default dev eth0
(вновь на HN)
# ip route add 8X.25.71.219 dev veth244.0

Либо конфигурация с bridge
http://wiki.openvz.org/Veth#Virtual_Ethernet_devices_can_be_ joined_in_one_bridge

Report message to a moderator

[Message index]

		[solved] eth0 in VE By: beaver on Mon, 26 January 2009 18:03
		Re: eth0 in VE By: maratrus on Tue, 27 January 2009 08:23
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 08:56
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 08:59
		Re: eth0 in VE By: maratrus on Tue, 27 January 2009 09:07
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 09:10
		Re: eth0 in VE By: maratrus on Tue, 27 January 2009 09:18
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 09:19
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 09:31
		Re: eth0 in VE By: maratrus on Tue, 27 January 2009 09:34
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 09:38
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 13:26
		Re: eth0 in VE By: maratrus on Tue, 27 January 2009 13:54
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 13:56
		Re: eth0 in VE By: beaver on Tue, 27 January 2009 14:19
		Re: [solved] eth0 in VE By: _ib_ on Fri, 30 January 2009 03:56
		Re: [solved] eth0 in VE By: maratrus on Fri, 30 January 2009 08:56
		Re: [solved] eth0 in VE By: _ib_ on Fri, 13 February 2009 02:29
		Re: [solved] eth0 in VE By: maratrus on Fri, 13 February 2009 10:18
		Re: [solved] eth0 in VE By: _ib_ on Fri, 13 February 2009 13:04
		Re: [solved] eth0 in VE By: maratrus on Fri, 13 February 2009 13:15
		Re: [solved] eth0 in VE By: _ib_ on Tue, 17 February 2009 02:30
		Re: [solved] eth0 in VE By: maratrus on Tue, 24 February 2009 08:27

Previous Topic:	Centos 5.2 + ip alias
Next Topic:	kernel-2.6.24 bug - traffic control settings

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 12 17:03:23 GMT 2025

Total time taken to generate the page: 0.36149 seconds