OpenVZ Forum: Support » Using private ip for containers with public ip for the hardware node

Home » General » Support » Using private ip for containers with public ip for the hardware node

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: Using private ip for containers with public ip for the hardware node [message #33785 is a reply to message #33734]

Mon, 10 November 2008 08:09

khorenko
Messages: 533
Registered: January 2006
Location: Moscow, Russia

Senior Member

Hi,

well, you can configure iptables on a Hardware Node in such a way that packets received on the Hardware Node on port X will be forwarded to some Container to port Y if this is what you need.

Then to reach Container you'll need access Hardware Node's IP and use port X.

--
Konstantin

If your problem is solved - please, report it!
It's even more important than reporting the problem itself...

Report message to a moderator

[Message index]

		Using private ip for containers with public ip for the hardware node By: kavita.gupta82 on Tue, 04 November 2008 10:56
		Re: Using private ip for containers with public ip for the hardware node By: kenjy on Tue, 04 November 2008 16:55
		Re: Using private ip for containers with public ip for the hardware node By: kavita.gupta82 on Wed, 05 November 2008 12:29
		Re: Using private ip for containers with public ip for the hardware node By: khorenko on Mon, 10 November 2008 08:09

Previous Topic:	[solved] How to determine which HN a VE is running on
Next Topic:	[answered] VE on GFS/GFS2

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Feb 06 13:46:09 GMT 2026

Total time taken to generate the page: 0.45778 seconds