OpenVZ Forum: Support » VLAN not working in VE? <SOLVED>

Home » General » Support » VLAN not working in VE? <SOLVED>

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: VLAN not working in VE? [message #33491 is a reply to message #33482]

Fri, 17 October 2008 06:44

januszzz
Messages: 50
Registered: January 2007
Location: Opole, Poland

Member

Hey, I've just been too quick - adding vlans using standard way works, but not exactly:

PING 10.0.1.1 (10.0.1.1) 56(84) bytes of data.
64 bytes from 10.0.1.1: icmp_seq=5 ttl=254 time=0.471 ms
64 bytes from 10.0.1.1: icmp_seq=6 ttl=254 time=0.819 ms
64 bytes from 10.0.1.1: icmp_seq=7 ttl=254 time=0.470 ms
64 bytes from 10.0.1.1: icmp_seq=8 ttl=254 time=0.447 ms
64 bytes from 10.0.1.1: icmp_seq=9 ttl=254 time=0.452 ms
64 bytes from 10.0.1.1: icmp_seq=10 ttl=254 time=0.462 ms
64 bytes from 10.0.1.1: icmp_seq=11 ttl=254 time=0.442 ms
64 bytes from 10.0.1.1: icmp_seq=12 ttl=254 time=0.460 ms
64 bytes from 10.0.1.1: icmp_seq=13 ttl=254 time=0.453 ms
64 bytes from 10.0.1.1: icmp_seq=14 ttl=254 time=4.93 ms
64 bytes from 10.0.1.1: icmp_seq=39 ttl=254 time=0.455 ms
64 bytes from 10.0.1.1: icmp_seq=40 ttl=254 time=0.463 ms
64 bytes from 10.0.1.1: icmp_seq=41 ttl=254 time=0.473 ms
64 bytes from 10.0.1.1: icmp_seq=42 ttl=254 time=0.471 ms
64 bytes from 10.0.1.1: icmp_seq=43 ttl=254 time=2.93 ms
64 bytes from 10.0.1.1: icmp_seq=44 ttl=254 time=1.61 ms
64 bytes from 10.0.1.1: icmp_seq=45 ttl=254 time=0.464 ms
64 bytes from 10.0.1.1: icmp_seq=46 ttl=254 time=0.470 ms
64 bytes from 10.0.1.1: icmp_seq=71 ttl=254 time=3.94 ms
64 bytes from 10.0.1.1: icmp_seq=72 ttl=254 time=0.482 ms

On HN I see:

08:39:48.008360 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 16, length 64
08:39:49.008382 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 17, length 64
08:39:50.008406 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 18, length 64
08:39:50.016660 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:50.016668 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:50.016670 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:51.008434 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 19, length 64
08:39:52.008458 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 20, length 64
08:39:53.008482 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 21, length 64
08:39:54.008508 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 22, length 64
08:39:54.026760 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:54.026771 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:54.026774 IP 10.0.1.254 > 10.0.1.1: ICMP host 10.0.1.2 unreachable, length 92
08:39:54.727549 IP 126.66.64.151 > 126.66.48.19: ICMP echo reply, id 12562, seq 0, length 55
08:39:54.758427 IP 126.66.64.151 > 126.66.48.19: ICMP echo reply, id 12562, seq 1, length 55
08:39:54.811496 IP 126.66.64.151 > 126.66.48.19: ICMP echo reply, id 12562, seq 2, length 55
08:39:55.008534 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 23, length 64
08:39:56.008559 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 24, length 64
08:39:57.008585 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 25, length 64
08:39:58.008609 IP 10.0.1.2 > 10.0.1.1: ICMP echo request, id 58639, seq 26, length 64

The same goes for the second vlan. From HN pings goes ok, to both vlans.
Any ideas why?

[Updated on: Fri, 17 October 2008 06:58]

Report message to a moderator

[Message index]

		VLAN not working in VE? <SOLVED> By: januszzz on Mon, 13 October 2008 12:23
		Re: VLAN not working in VE? By: maratrus on Mon, 13 October 2008 15:13
		Re: VLAN not working in VE? By: januszzz on Mon, 13 October 2008 18:13
		Re: VLAN not working in VE? By: januszzz on Mon, 13 October 2008 18:54
		Re: VLAN not working in VE? By: maratrus on Tue, 14 October 2008 04:00
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 07:02
		Re: VLAN not working in VE? By: maratrus on Tue, 14 October 2008 07:29
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 07:37
		Re: VLAN not working in VE? By: maratrus on Tue, 14 October 2008 07:51
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 13:03
		Re: VLAN not working in VE? By: maratrus on Tue, 14 October 2008 13:13
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 08:01
		Re: VLAN not working in VE? By: maratrus on Tue, 14 October 2008 08:12
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 09:55
		Re: VLAN not working in VE? By: januszzz on Tue, 14 October 2008 08:38
		Re: VLAN not working in VE? By: januszzz on Wed, 15 October 2008 13:18
		Re: VLAN not working in VE? By: maratrus on Thu, 16 October 2008 07:01
		Re: VLAN not working in VE? By: januszzz on Thu, 16 October 2008 08:34
		Re: VLAN not working in VE? By: januszzz on Thu, 16 October 2008 08:36
		Re: VLAN not working in VE? By: maratrus on Thu, 16 October 2008 08:55
		Re: VLAN not working in VE? By: januszzz on Thu, 16 October 2008 09:05
		Re: VLAN not working in VE? By: januszzz on Fri, 17 October 2008 06:44
		Re: VLAN not working in VE? <SOLVED> By: januszzz on Sun, 26 October 2008 18:47

Previous Topic:	iptables classifies ESTABLISHED packets as INVALID randomly
Next Topic:	WORKED AROUND Add /proc/bus/usb inside VE ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 09 16:19:11 GMT 2025

Total time taken to generate the page: 0.15607 seconds