OpenVZ Forum


Home » General » Support » Kernel Upgrade fails
Re: Kernel Upgrade fails [message #30653 is a reply to message #30064] Sun, 01 June 2008 06:48 Go to previous messageGo to previous message
johan_hammy is currently offline  johan_hammy
Messages: 99
Registered: December 2005
Member
I updated this BIOS, and now I get this. I tried apic=debug, but it balked at it.

Memory for crash kernel (0x0 to 0x0) notwithin permissible range

Unknown genapic `apic=debug' specified.

..MP-BIOS bug: 8254 timer not connected to IO-APIC

Kernel panic - not syncing: IO-APIC + timer doesn't work!  Boot with apic=debug and send a report.  Then try booting with the 'noapic' option

Memory for crash kernel (0x0 to 0x0) notwithin permissible range

PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved

PCI: Not using MMCONFIG.

ÿrequest_module: runaway loop modprobe binfmt-464c

request_module: runaway loop modprobe binfmt-464c

request_module: runaway loop modprobe binfmt-464c

request_module: runaway loop modprobe binfmt-464c

request_module: runaway loop modprobe binfmt-464c


It only boots into the old kernel (Linux Char.ICS.local 2.6.18-53.1.6.el5.028stab053.6 #1 SMP Mon Feb 11 20:14:31 MSK 2008 x86_64 x86_64 x86_64 GNU/Linux) with noapic. USB devices don't work once it finishes booting.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Upgrade kernel to newest one and system hangs up
Next Topic: [solved] /proc/net/tcp is empty or unable to open
Goto Forum:
  


Current Time: Thu Jul 11 21:27:22 GMT 2024

Total time taken to generate the page: 0.02582 seconds