Hi all,

I've got some problems installing openVZ and would be very grateful, if anyone could help me further. I'll try to provide the necessary information, but as I don't know, what might be needed, please tell me if you need more input:

I'm running opensuse 10.3 on my computer and tried to install openvz. 
I've downloaded the package

kernel-ovz-2.6.16.46_027test011-0.12.i686.rpm

from the openvz homepage.
Next I started the installation via rpm -ivh, checked the GRUB-loader /boot/grub/menu-lst and rebooted. The entry was shown and selectable but the kernel didn't boot.

Later I found another package at 

http://download.opensuse.org/repositories/home:/openvz/SUSE_Linux_10.1/

but the installation didn't work either.

I remove the silent entry from GRUB and saw, that both kernels seemed not to be able to find the disk - but that is the same as for the normal kernel as well as for the also installed XEN-kernel.

My suspect is, that the kernels do not match (please don't laugh, I'm a newbie).

My normal kernel:
stephan@mpiphysicaltest1:~> uname -r
2.6.22.17-0.1-default

And the /boot/grub/menu.lst looks like this:

# Modified by YaST2. Last modification on Tue May 27 19:12:02 CEST 2008
default 3
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,1)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title Ovzpae -- openSUSE 10.3 - 2.6.16.43-027test002-24.1
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.16.43-027test002-24.1-ovzpae root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM33208_9QF9K35F-part2 vga=0x31a acpi=off resume=/dev/sda1  showopts
    initrd /boot/initrd-2.6.16.43-027test002-24.1-ovzpae

###Don't change this comment - YaST2 identifier: Original name: linux-2.6.16-027test011-0.12-ovz###
title Ovz -- openSUSE 10.3 - 2.6.16-027test011-0.12
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.16-027test011-0.12-ovz root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM33208_9QF9K35F-part2 vga=0x31a acpi=off resume=/dev/sda1 showopts
    initrd /boot/initrd-2.6.16-027test011-0.12-ovz

###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.3 - 2.6.22.17-0.1
    root (hd0,1)
    kernel /boot/xen.gz
    module /boot/vmlinuz-2.6.22.17-0.1-xen root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM33208_9QF9K35F-part2 vga=0x31a acpi=off resume=/dev/sda1 showopts
    module /boot/initrd-2.6.22.17-0.1-xen

###Don't change this comment - YaST2 identifier: Original name: linux-2.6.22.17-0.1-default###
title openSUSE 10.3 - 2.6.22.17-0.1
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM33208_9QF9K35F-part2 vga=0x31a acpi=off resume=/dev/sda1 showopts
    initrd /boot/initrd-2.6.22.17-0.1-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.17-0.1
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM33208_9QF9K35F-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
    initrd /boot/initrd-2.6.22.17-0.1-default

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
    rootnoverify (hd0,1)
    chainloader (fd0)+1


Do you have any idea, what might be wrong? Is it the wrong package? Where can I get the right package?

Thanks in advance!

Kind Regards

Stephan
-- 
GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen!
Jetzt dabei sein: http://www.shortview.de/?mc=sv_ext_mf@gmx