OpenVZ Forum: Support » (SOLVED) sysctl -p issue

Home » General » Support » (SOLVED) sysctl -p issue

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: sysctl -p issue [message #24297 is a reply to message #24239]

Mon, 03 December 2007 18:23

soptom
Messages: 34
Registered: October 2007
Location: Greece

Member

[root@master2 ~]# cat /proc/sys/net/ipv4/ip_forward
0
HARDWARE NODE
[root@master2 ~]# ip a l
2: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:02:b3:b7:29:75 brd ff:ff:ff:ff:ff:ff
inet 91.194.90.25/25 brd 91.194.90.127 scope global eth0
inet6 fe80::202:b3ff:feb7:2975/64 scope link
valid_lft forever preferred_lft forever
6: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
1: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/void
[root@master2 ~]# ip r l
91.194.90.126 dev venet0 scope link
91.194.90.0/25 dev eth0 proto kernel scope link src 91.194.90.25
169.254.0.0/16 dev eth0 scope link
default via 91.194.90.1 dev eth0

VE

[root@fc6 /]# ip a l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/void
inet 127.0.0.1/32 scope host venet0
inet 91.194.90.126/32 brd 91.194.90.126 scope global venet0:0
[root@fc6 /]# ip r l
192.0.2.0/24 dev venet0 scope host
169.254.0.0/16 dev venet0 scope link
default via 192.0.2.1 dev venet0

HARDWARE NODE
iptables commands and results attached with files named iptables1.txt and iptables2.txt

Attachment: iptables1.txt
(Size: 52.58KB, Downloaded 303 times)
Attachment: iptables2.txt
(Size: 0.28KB, Downloaded 323 times)

Report message to a moderator

[Message index]

		(SOLVED) sysctl -p issue By: soptom on Tue, 27 November 2007 13:43
		Re: sysctl -p issue By: vaverin on Wed, 28 November 2007 08:01
		Re: sysctl -p issue By: soptom on Wed, 28 November 2007 10:10
		Re: sysctl -p issue By: vaverin on Wed, 28 November 2007 10:32
		Re: sysctl -p issue By: soptom on Wed, 28 November 2007 13:07
		Re: sysctl -p issue By: soptom on Fri, 30 November 2007 13:09
		Re: sysctl -p issue By: maratrus on Mon, 03 December 2007 10:48
		Re: sysctl -p issue By: soptom on Mon, 03 December 2007 11:15
		Re: sysctl -p issue By: maratrus on Mon, 03 December 2007 13:28
		Re: sysctl -p issue By: soptom on Mon, 03 December 2007 18:23
		Re: sysctl -p issue By: maratrus on Mon, 03 December 2007 21:24
		Re: sysctl -p issue By: soptom on Tue, 04 December 2007 11:58
		Re: sysctl -p issue By: soptom on Wed, 05 December 2007 10:15
		Re: sysctl -p issue By: vaverin on Wed, 05 December 2007 10:18
		Re: sysctl -p issue By: soptom on Wed, 05 December 2007 14:08
		Re: sysctl -p issue By: vaverin on Wed, 05 December 2007 14:22
		Re: sysctl -p issue By: ugob on Wed, 05 December 2007 14:28
		Re: sysctl -p issue By: ugob on Wed, 05 December 2007 14:30
		Re: sysctl -p issue By: soptom on Wed, 05 December 2007 15:02
		Re: sysctl -p issue By: ugob on Wed, 05 December 2007 15:13
		Re: sysctl -p issue By: soptom on Wed, 05 December 2007 15:40
		Re: sysctl -p issue By: ugob on Wed, 05 December 2007 15:44
		(Solved) Re: sysctl -p issue By: soptom on Tue, 11 December 2007 01:11

Previous Topic:	bugreport filed: USB device in VE / All-in-one printer-scanner
Next Topic:	eth0+eth1 bridge?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 01 04:15:51 GMT 2025

Total time taken to generate the page: 0.55577 seconds