Home » General » Support » max number of VE
| Re: max number of VE [message #16255 is a reply to message #16254] |
Wed, 29 August 2007 21:46   |
yahbluez
Messages: 18
Registered: August 2007
Location: Germany
|
Junior Member |
|
|
Hi Kirr,
kernel:
Linux version 2.6.18-openvz-12-1etch1-amd64 () (ola@deb-build-amd64.openvz.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21))
Not self made.
full dmesg:
Bootdata ok (command line is root=/dev/mapper/vg-rootfs ro )
Linux version 2.6.18-openvz-12-1etch1-amd64 () (ola@deb-build-amd64.openvz.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri May 4 23:37:24 MSD 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
DMI 2.4 present.
ACPI: RSDP (v002 DELL ) @ 0x00000000000f2620
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f26a0
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f27a8
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f289c
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f297d
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f29cd
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2a05
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000430000000
Bootmem setup node 0 0000000000000000-0000000430000000
On node 0 totalpages: 4124603
DMA zone: 3027 pages, LIFO batch:0
DMA32 zone: 831464 pages, LIFO batch:31
Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Built 1 zonelists. Total pages: 4124603
Kernel command line: root=/dev/mapper/vg-rootfs ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 1596.045 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x2884000 - 0x6884000
Memory: 16401928k/17563648k available (1930k kernel code, 374552k reserved, 872k data, 204k init)
Calibrating delay using timer specific routine.. 3195.32 BogoMIPS (lpj=6390645)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060707
Page beancounter hash is 2097152 entries.
Using local APIC timer interrupts.
result 16625469
Detected 16.625 MHz APIC timer.
Booting processor 1/8 APIC 0x4
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.18 BogoMIPS (lpj=6384368)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 2/8 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 3192.17 BogoMIPS (lpj=6384358)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 3/8 APIC 0x5
Initializing CPU#3
Calibrating delay using timer specific routine.. 3192.24 BogoMIPS (lpj=6384492)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 4/8 APIC 0x2
Initializing CPU#4
Calibrating delay using timer specific routine.. 3192.17 BogoMIPS (lpj=6384348)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 5/8 APIC 0x6
Initializing CPU#5
Calibrating delay using timer specific routine.. 3192.18 BogoMIPS (lpj=6384371)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU5: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 6/8 APIC 0x3
Initializing CPU#6
Calibrating delay using timer specific routine.. 3192.17 BogoMIPS (lpj=6384340)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 3192.24 BogoMIPS (lpj=6384491)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Brought up 8 CPUs
testing NMI watchdog ... OK.
migration_cost=18,11860
checking if image is initramfs... it is
Freeing initrd memory: 5409k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:10:0d.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid IPI0001
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0103
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:03' and the driver 'system'
...
|
|
|
|
 |
|
max number of VE
By: yahbluez on Mon, 27 August 2007 21:01 |
|
|
Re: max number of VE
By: kir on Tue, 28 August 2007 00:05 |
|
|
Re: max number of VE
By: yahbluez on Tue, 28 August 2007 12:31 |
|
|
Re: max number of VE
By: kir on Tue, 28 August 2007 12:40 |
|
|
Re: max number of VE
By: yahbluez on Wed, 29 August 2007 11:35 |
|
|
Re: max number of VE
By: dev on Wed, 29 August 2007 14:16 |
|
|
Re: max number of VE
By: dev on Wed, 29 August 2007 14:18 |
|
|
Re: max number of VE
By: dev on Wed, 29 August 2007 14:17 |
|
|
Re: max number of VE
By: yahbluez on Wed, 29 August 2007 15:59 |
|
|
Re: max number of VE
By: kir on Wed, 29 August 2007 21:24 |
|
|
Re: max number of VE
By: yahbluez on Wed, 29 August 2007 21:46 |
|
|
Re: max number of VE
By: dev on Thu, 30 August 2007 08:10 |
|
|
Re: max number of VE
By: yahbluez on Thu, 30 August 2007 09:17 |
|
|
Re: max number of VE
By: dev on Thu, 30 August 2007 09:21 |
|
|
Re: max number of VE
By: yahbluez on Thu, 30 August 2007 09:58 |
|
|
Re: max number of VE
By: kir on Thu, 30 August 2007 11:26 |
|
 |
SOLVED Re: max number of VE
By: yahbluez on Thu, 30 August 2007 12:53 |
|
|
Re: SOLVED Re: max number of VE
By: kir on Thu, 30 August 2007 13:39 |
|
|
Re: SOLVED Re: max number of VE
By: yahbluez on Thu, 30 August 2007 14:05 |
Goto Forum:
Current Time: Tue Sep 10 08:05:11 GMT 2024
Total time taken to generate the page: 0.07465 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
