OpenVZ Forum


Home » General » Support » *SOLVED* ISDN PRI with OpenVZ
Re: ISDN PRI with OpenVZ [message #12789 is a reply to message #12772] Wed, 09 May 2007 14:05 Go to previous messageGo to previous message
shmaize is currently offline  shmaize
Messages: 2
Registered: May 2007
Junior Member
[root@aster wanpipe]# lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 LE (rev a1)
06:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
06:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
06:03.0 Network controller: Sangoma Technologies Corp. A101 single-port T1/E1 (rev 01)


[root@aster wanpipe]# lspci -n
00:00.0 0600: 8086:2580
00:01.0 0604: 8086:2581
00:1b.0 0403: 8086:2668 (rev 03)
00:1c.0 0604: 8086:2660 (rev 03)
00:1c.1 0604: 8086:2662 (rev 03)
00:1c.2 0604: 8086:2664 (rev 03)
00:1c.3 0604: 8086:2666 (rev 03)
00:1d.0 0c03: 8086:2658 (rev 03)
00:1d.1 0c03: 8086:2659 (rev 03)
00:1d.2 0c03: 8086:265a (rev 03)
00:1d.3 0c03: 8086:265b (rev 03)
00:1d.7 0c03: 8086:265c (rev 03)
00:1e.0 0604: 8086:244e (rev d3)
00:1f.0 0601: 8086:2640 (rev 03)
00:1f.1 0101: 8086:266f (rev 03)
00:1f.2 0101: 8086:2651 (rev 03)
00:1f.3 0c05: 8086:266a (rev 03)
01:00.0 0300: 10de:01d1 (rev a1)
06:01.0 0200: 10b7:9200 (rev 74)
06:02.0 0200: 1186:1300 (rev 10)
06:03.0 0280: 1923:0300 (rev 01)



The Sangoma works with my currect distribution (Fedora Core 6, 2.6.19-1.2911.6.5.fc6).

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: *SOLVED* Connect VE to two different networks on two different NIC's
Next Topic: how can I patch OVZ kernel 2.6.12--28stab024 to last kernel stab
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Feb 17 06:47:29 GMT 2026

Total time taken to generate the page: 0.39212 seconds
Powered by FUDforum Powered by Virtuozzo Containers