Linux version 2.6.15-025stab014.1 (root@kern2615.build.sw.ru) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Fri Jan 27 15:47:30 MSK 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 000000000009f800 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 524272 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294896 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff910 ACPI: RSDT (v001 RCC GCSL 0x00000001 MSFT 0x01000000) @ 0x7fff0000 ACPI: FADT (v001 RCC GCSL 0x00000001 MSFT 0x01000000) @ 0x7fff0030 ACPI: MADT (v001 RCC GCSL 0x00000001 MSFT 0x01000000) @ 0x7fff00b0 ACPI: DSDT (v001 RCC GCSL 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Built 1 zonelists Kernel command line: ro root=LABEL=/ mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec01000) mapped IOAPIC to ffffa000 (fec02000) Initializing CPU#0 CPU 0 irqstacks, hard=c0509000 soft=c0508000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2791.357 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070944k/2097088k available (2937k kernel code, 24852k reserved, 913k data, 252k init, 1179584k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5588.36 BogoMIPS (lpj=2794182) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI-0610: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [IORG] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope) Page beancounter hash is 131072 entries. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking if image is initramfs... it is Freeing initrd memory: 976k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=3 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS Boot video device is 0000:00:07.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: PCI _CRS 1 overrides _BBN 0 ACPI: PCI Root Bridge [PCI1] (0000:01) PCI: Probing PCI hardware (bus 01) ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI _CRS 3 overrides _BBN 0 ACPI: PCI Root Bridge [PCI2] (0000:03) PCI: Probing PCI hardware (bus 03) ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 11 12 14 15) *1 ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN20] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN21] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN22] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN23] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN25] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN26] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN27] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN28] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN29] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN30] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LN31] (IRQs 3 4 5 7 9 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNUS] (IRQs *10) SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:01:03.0 IO window: 8000-afff MEM window: fe600000-fe7fffff PREFETCH window: fb000000-fb0fffff IA-32 Microcode Update Driver: v1.14 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.8) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST3200822A, ATA DISK drive hdb: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 1024KiB hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > Adaptec aacraid driver (1.1-4 Jan 27 2006 15:46:50) Emulex LightPulse Fibre Channel SCSI driver 8.1.0 Copyright(c) 2004-2005 Emulex. All rights reserved. megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005) megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005 GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 16 scsi0 : 3ware Storage Controller 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x5400, IRQ: 16. Vendor: 3ware Model: Logical Disk 0 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. libata version 1.20 loaded. SCSI device sda: 1470698112 512-byte hdwr sectors (752997 MB) SCSI device sda: drive cache: write back SCSI device sda: 1470698112 512-byte hdwr sectors (752997 MB) SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3604.000 MB/sec raid5: using function: pIII_sse (3604.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 524288 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: SLPB NRTH PS2M PS2K USB PCI1 PCI2 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 252k freed input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 usbcore: registered new driver usbfs usbcore: registered new driver hub hdb: ATAPI 40X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 sd_mod: version magic '2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0' should be '2.6.15-025stab014.1 686 4KSTACKS gcc-3.3' sd_mod: version magic '2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0' should be '2.6.15-025stab014.1 686 4KSTACKS gcc-3.3' Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Ethernet Channel Bonding Driver: v2.6.5 (November 4, 2005) bonding: MII link monitoring set to 100 ms Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 17 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 18 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 19 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 23 (level, low) -> IRQ 20 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 21 e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 31 (level, low) -> IRQ 22 e100: eth5: e100_probe: addr 0xfe5ff000, irq 22, MAC addr 00:E0:81:29:24:D4 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNUS] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfd5fe000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Sleep Button (CM) [SLPB] Using specific hotkey driver ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. cdrom: open failed. cdrom: open failed. EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4192924k swap on /dev/hda6. Priority:-1 extents:1 across:4192924k