Linux version 2.6.18-128.1.1.el5.028stab062.3 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Sun May 10 18:54:51 MSD 2009 Command line: ro root=LABEL=/ BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dff90000 (usable) BIOS-e820: 00000000dff9e000 - 00000000dffa0000 type 9 BIOS-e820: 00000000dffa0000 - 00000000dffae000 (ACPI data) BIOS-e820: 00000000dffae000 - 00000000dffe0000 (ACPI NVS) BIOS-e820: 00000000dffe0000 - 00000000dffee000 (reserved) BIOS-e820: 00000000dfff0000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000220000000 (usable) DMI present. ACPI: RSDP (v002 HP ) @ 0x00000000000f9be0 ACPI: XSDT (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa0100 ACPI: FADT (v004 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa0290 ACPI: MADT (v002 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa0390 ACPI: MCFG (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa0480 ACPI: SPMI (v005 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa04c0 ACPI: SLIC (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa0510 ACPI: OEMB (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffae040 ACPI: HPET (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa5570 ACPI: EINJ (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa55b0 ACPI: BERT (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa5740 ACPI: ERST (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa5770 ACPI: HEST (v001 HP ProLiant 0x20081002 HP 0x00000097) @ 0x00000000dffa5920 ACPI: DSDT (v002 HP ProLiant 0x00000073 INTL 0x20051117) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-0000000220000000 Bootmem setup node 0 0000000000000000-0000000220000000 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump On node 0 totalpages: 2060783 DMA zone: 2591 pages, LIFO batch:0 DMA32 zone: 896976 pages, LIFO batch:31 Normal zone: 1161216 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) Processor #4 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) Processor #2 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) Processor #3 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Processor #5 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Processor #6 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 7:7 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] high dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a301 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000dff90000 - 00000000dff9e000 Nosave address range: 00000000dff9e000 - 00000000dffa0000 Nosave address range: 00000000dffa0000 - 00000000dffae000 Nosave address range: 00000000dffae000 - 00000000dffe0000 Nosave address range: 00000000dffe0000 - 00000000dffee000 Nosave address range: 00000000dffee000 - 00000000dfff0000 Nosave address range: 00000000dfff0000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fee01000 Nosave address range: 00000000fee01000 - 00000000ffe00000 Nosave address range: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at f1000000 (gap: f0000000:ee00000) Built 1 zonelists. Total pages: 2060783 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1c5f000 - 0x5c5f000 Memory: 8161596k/8912896k available (2483k kernel code, 226176k reserved, 1319k data, 220k init) Calibrating delay using timer specific routine.. 4658.24 BogoMIPS (lpj=2329124) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) Freeing SMP alternatives: 32k freed ACPI: Core revision 20060707 Page beancounter hash is 1048576 entries. Using local APIC timer interrupts. result 20781293 Detected 20.781 MHz APIC timer. Booting processor 1/8 APIC 0x4 Initializing CPU#1 Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327512) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 2/8 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4655.32 BogoMIPS (lpj=2327662) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 3/8 APIC 0x2 Initializing CPU#3 Calibrating delay using timer specific routine.. 4655.00 BogoMIPS (lpj=2327502) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 4/8 APIC 0x3 Initializing CPU#4 Calibrating delay using timer specific routine.. 4655.00 BogoMIPS (lpj=2327504) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU4: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 5/8 APIC 0x5 Initializing CPU#5 Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327509) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU5: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 6/8 APIC 0x6 Initializing CPU#6 Calibrating delay using timer specific routine.. 4754.49 BogoMIPS (lpj=2377247) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU6: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327510) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU L5410 @ 2.33GHz stepping 0a Brought up 8 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2327.506 MHz processor. sizeof(vma)=176 bytes sizeof(page)=64 bytes sizeof(inode)=608 bytes sizeof(dentry)=248 bytes sizeof(ext3inode)=808 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=272 bytes migration_cost=16,14428 checking if image is initramfs... it is Freeing initrd memory: 2592k freed NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:08:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BCM_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: 00:07: ioport range 0xa00-0xa7f has been reserved pnp: 00:07: ioport range 0xa80-0xa83 has been reserved pnp: 00:07: ioport range 0xa84-0xa85 has been reserved pnp: 00:07: ioport range 0xa88-0xa8f has been reserved pnp: 00:07: ioport range 0xa90-0xa9f has been reserved pnp: 00:07: ioport range 0xb00-0xbfe has been reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: d000-dfff MEM window: fcc00000-fccfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: e000-efff MEM window: fcd00000-fcefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: fd000000-fdffffff PREFETCH window: fb000000-fbffffff PCI: Bridge: 0000:00:1c.5 IO window: disabled. MEM window: fcf00000-fcffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1246869969.384:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] Allocate Port Service[0000:00:04.0:pcie02] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie02] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 220k freed Write protecting the kernel read-only data: 501k GSI 18 sharing vector 0x4A and IRQ 18 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 74, io mem 0xfcbffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000c800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 19 sharing vector 0x52 and IRQ 19 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.1: irq 82, io base 0x0000c880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected GSI 20 sharing vector 0x5A and IRQ 20 ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.2: irq 90, io base 0x0000cc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected GSI 21 sharing vector 0x62 and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 98, io base 0x0000c080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 90, io base 0x0000c400 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 74, io base 0x0000c480 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 5-1: new full speed USB device using uhci_hcd and address 2 SCSI subsystem initialized HP CISS Driver (v 3.6.20-16S) cciss: Device 0x3230 has been found at bus 6 dev 0 func 0 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169 cciss/c0d0: p1 p2 p3 cciss/c0d1:<6>usb 5-1: configuration #1 chosen from 1 choice input: ServerEngines SE USB Device as /class/input/input0 input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1 input: ServerEngines SE USB Device as /class/input/input1 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1 p1 cciss/c0d2: p1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 90 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 bmdma 0xff90 irq 14 ata2: SATA max UDMA/133 bmdma 0xff98 irq 15 ata1: SATA link down (SStatus 0 SControl 310) ata2: SATA link down (SStatus 0 SControl 310) ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 90 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 90 ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 90 ata3: SATA link down (SStatus 0 SControl 310) ata4: SATA link down (SStatus 0 SControl 310) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com device-mapper: dm-raid45: initialized v0.2429 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 74 input: PC Speaker as /class/input/input2 Generic PHY: Registered new driver Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth0: (PCI Express:2.5GB/s:Width x1) 00:18:71:ec:e2:4e eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 1, PHY: 4, PBA No: d70413-003 tg3.c:v3.93 (May 22, 2008) ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:07:00.0 to 64 eth1: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:24:81:26:f1:93 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1p1, internal journal ext3_orphan_cleanup: deleting unreferenced inode 213843973 ext3_orphan_cleanup: deleting unreferenced inode 186253739 ext3_orphan_cleanup: deleting unreferenced inode 187574349 ext3_orphan_cleanup: deleting unreferenced inode 187482484 ext3_orphan_cleanup: deleting unreferenced inode 187565628 ext3_orphan_cleanup: deleting unreferenced inode 185958500 ext3_orphan_cleanup: deleting unreferenced inode 186050661 ext3_orphan_cleanup: deleting unreferenced inode 181963545 ext3_orphan_cleanup: deleting unreferenced inode 181963537 ext3_orphan_cleanup: deleting unreferenced inode 181963482 ext3_orphan_cleanup: deleting unreferenced inode 181963366 ext3_orphan_cleanup: deleting unreferenced inode 181963118 ext3_orphan_cleanup: deleting unreferenced inode 176031171 ext3_orphan_cleanup: deleting unreferenced inode 176031170 ext3_orphan_cleanup: deleting unreferenced inode 176031168 ext3_orphan_cleanup: deleting unreferenced inode 176031166 ext3_orphan_cleanup: deleting unreferenced inode 176031151 EXT3-fs: cciss/c0d1p1: 17 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d2p1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 4192956k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:4192956k IA-32 Microcode Update Driver: v1.14a tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is off for TX and off for RX. NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ipmi message handler version 39.1 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2001, dev_id: 0x12) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified smic state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ipmi device interface ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack CT: 212: started CT: 213: started CT: 214: started CT: 215: started CT: 216: started TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214) TCP: time wait bucket table overflow (CT214)