Linux version 2.6.9-023stab040.1-smp (root@rhel4-32) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Tue Jan 16 00:54:22 MSK 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009f931000 (usable)
 BIOS-e820: 000000009f931000 - 000000009f9cf000 (ACPI NVS)
 BIOS-e820: 000000009f9cf000 - 000000009fa42000 (usable)
 BIOS-e820: 000000009fa42000 - 000000009fa9a000 (reserved)
 BIOS-e820: 000000009fa9a000 - 000000009fad6000 (usable)
 BIOS-e820: 000000009fad6000 - 000000009fb1a000 (ACPI NVS)
 BIOS-e820: 000000009fb1a000 - 000000009fb2c000 (usable)
 BIOS-e820: 000000009fb2c000 - 000000009fb3a000 (ACPI data)
 BIOS-e820: 000000009fb3a000 - 000000009fc00000 (usable)
 BIOS-e820: 00000000ffe00000 - 00000000ffe0c000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fdb10
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1048576
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 819200 pages, LIFO batch:16
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 INTEL                                 ) @ 0x000f0350
ACPI: XSDT (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x9fb39120
ACPI: FADT (v003 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x9fb36000
ACPI: MADT (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x9fb35000
ACPI: SPCR (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x9fb2e000
ACPI: HPET (v001 INTEL  S5000PAL 0x00000001 INTL 0x01000013) @ 0x9fb2d000
ACPI: MCFG (v001 INTEL  S5000PAL 0x00000001 INTL 0x01000013) @ 0x9fb2c000
ACPI: DSDT (v002 INTEL  S5000PAL 0x00000008 INTL 0x01000013) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at a0000000 (gap: 9fc00000:60200000)
Virtuozzo Fair CPU scheduler
Built 1 zonelists
Kernel command line: ro root=LABEL=/1
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2569392k/4194304k available (3986k kernel code, 45644k reserved, 1355k data, 292k init, 1698528k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1995.137 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3992.46 BogoMIPS (lpj=1996232)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU: After all inits, caps:        bfebf3ff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: System reset via FADT Reset Register is supported
Page beancounter hash is 524288 entries.
CPU0: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
per-CPU timeslice cutoff: 5550.35 usecs.
task migration cache decay timeout: 6 msecs.
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=1994987)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU: After all inits, caps:        bfebf3ff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
Booting processor 2/6 eip 3000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3990.08 BogoMIPS (lpj=1995044)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU2: Physical Processor ID: 3
CPU2: Processor Core ID: 6
CPU2: Initial APIC ID: 6
CPU: After all inits, caps:        bfebf3ff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
Booting processor 3/7 eip 3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=1995038)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU3: Physical Processor ID: 3
CPU3: Processor Core ID: 7
CPU3: Initial APIC ID: 7
CPU: After all inits, caps:        bfebf3ff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
Total of 4 processors activated (15962.60 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
testing NMI watchdog ... OK.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 1263k freed
NET: Registered protocol family 16
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Unable to handle 64-bit address space for 
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO.PCIA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:04:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 20
ACPI: PCI interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:0e:0c.0[A] -> GSI 17 (level, low) -> IRQ 22
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10.RH1)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 19
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x40b0-0x40b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: SONY CD-RW/DVD-ROM CRX850E, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Adaptec aacraid driver (1.1-5[2412])
Loading AIC-94xx Linux SAS/SATA Family Driver, Rev: 1.0.8-6

AIC-94xx controller(s) attached = 0.

QLogic iSCSI HBA Driver (c0388380)
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6-rh2 (Release Date: Wed Jun 28 12:27:22 EST 2006)
megasas: 00.00.02.03-RH1 Mon Jan 30 16:30:45 PST 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.04 
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.00.039.
3w-xxxx: No cards found.
3ware 9000 Storage Controller device driver for Linux v2.26.04.010.
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x40C8 ctl 0x40E6 bmdma 0x40A0 irq 19
ata2: SATA max UDMA/133 cmd 0x40C0 ctl 0x40E2 bmdma 0x40A8 irq 19
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Emulex LightPulse Fibre Channel SCSI driver 8.0.16.27
Copyright(c) 2003-2006 Emulex.  All rights reserved.
Emulex LightPulse FC SCSI IOCTL 2.0.15
Copyright(c) 2003-2006 Emulex.  All rights reserved.
Fusion MPT base driver 3.02.62.01rh
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.02.62.01rh
Fusion MPT FC Host driver 3.02.62.01rh
Fusion MPT SAS Host driver 3.02.62.01rh
ACPI: PCI interrupt 0000:04:08.0[A] -> GSI 16 (level, low) -> IRQ 16
mptbase: Initiating ioc0 bringup
ioc0: SAS1068: Capabilities={Initiator}
scsi2 : ioc0: LSISAS1068, FwRev=010b0100h, Ports=1, MaxQ=267, IRQ=16
  Vendor: HITACHI   Model: HUS151436VLS300   Rev: A290
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 71687402 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71687402 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi2, channel 0, id 1, lun 0
  Vendor: ESG-SHV.  Model: SCA HSBP M11....  Rev: 1.41
  Type:   Enclosure                          ANSI SCSI revision: 03
mptbase: ioc0: LogInfo(0x3120010c): Originator={PL}, Code={Enclosure Management}, SubCode(0x010c)
mptbase: ioc0: LogInfo(0x3120010c): Originator={PL}, Code={Enclosure Management}, SubCode(0x010c)
mptbase: ioc0: LogInfo(0x3120010c): Originator={PL}, Code={Enclosure Management}, SubCode(0x010c)
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  7348.000 MB/sec
raid5: using function: pIII_sse (7348.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 131072 (order: 8, 1572864 bytes)
TCP: Hash tables configured (established 131072 bind 131072)
NET: Registered protocol family 1
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices: 
PEX0 PEX1 PEX2 PEX3 PCE4 PCE5 EXPC PXHA PXHB PCE7 PXHA PXHB  LPC PS2M PS2K UHC1 UHC2 UHC3 UHC4 EHCI PCIE PCIO PCIP PCIQ 
Freeing unused kernel memory: 292k freed
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.0: PCI device 8086:2688 (Intel Corp.)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 17, io base 00004080
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: PCI device 8086:2689 (Intel Corp.)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 18, io base 00004060
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.2: PCI device 8086:268a (Intel Corp.)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 17, io base 00004040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.3: PCI device 8086:268b (Intel Corp.)
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 18, io base 00004020
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.7: PCI device 8086:268c (Intel Corp.)
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 17, pci mem f8a20400
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
cdrom: open failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 27318 to 31119
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 15649 and revoked 25/40 blocks
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
inserting floppy driver for 2.6.9-023stab040.1-smp
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
cdrom: open failed.
EXT3 FS on sda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.