OpenVZ Forum: Support » Unable to open pty: Mo such file or directory

Home » General » Support » Unable to open pty: Mo such file or directory

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Unable to open pty: Mo such file or directory [message #9731]

Fri, 19 January 2007 04:55

mperkel
Messages: 253
Registered: December 2006

Senior Member

I'm trying to create a FC6 64 bit VE and not getting it to work. I did an install of FC6 and copied all the files over. Then I copied the /dev directory form a working VE and a few other tricks. But - I'm getting this error when I try to enter the VE.

Unable to open pty: Mo such file or directory

What does this mean?

Junk Email Filter
http://www.junkemailfilter.com

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9732 is a reply to message #9731]

Fri, 19 January 2007 07:02

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

Have you installed kernel from rpm or built it yourself?
In the second case post .config file please.
Also please post the output of the following comands
on HN after starting VE:

cat /proc/mounts
ls /vz/root/<veid>/dev

Thank you.

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9742 is a reply to message #9732]

Fri, 19 January 2007 12:59

youp
Messages: 82
Registered: September 2005
Location: Belgium

Member

i have the same error , the files are in attach ...

Attachment: ls.JPG
(Size: 229.48KB, Downloaded 283 times)
Attachment: config
(Size: 37.88KB, Downloaded 237 times)

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9743 is a reply to message #9742]

Fri, 19 January 2007 13:09

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

You forgot about `cat /proc/mounts` output after VE start, Rolling Eyes

Thanks

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9744 is a reply to message #9731]

Fri, 19 January 2007 13:13

youp
Messages: 82
Registered: September 2005
Location: Belgium

Member

oupps

[root@vz4 linux-2.6.18.old]# cat /proc/mounts
/dev/root / ext3 rw,data=ordered 0 0
/dev /dev tmpfs rw 0 0
/proc /proc proc rw 0 0
/sys /sys sysfs rw 0 0
/proc/bus/usb /proc/bus/usb usbfs rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/sda1 /boot ext3 rw,data=ordered 0 0
tmpfs /dev/shm tmpfs rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
/dev/drbd1 /vz2 ext3 rw,data=ordered 0 0
/dev/drbd2 /vz3 ext3 rw,data=ordered 0 0
/dev/sda8 /backup ext3 rw,data=ordered 0 0
/vz3/private/133 /vz3/root/133 simfs rw 0 0
/dev/sda8 /vz3/root/133/backup ext3 rw,data=ordered 0 0
/proc /vz3/root/133/proc proc rw 0 0
none /vz3/root/133/dev/pts devpts rw 0 0
/vz3/private/133 /vz3/root/133/var/tmp simfs rw,nosuid,noexec 0 0

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9745 is a reply to message #9744]

Fri, 19 January 2007 13:22

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

Hmmm... seems to be ok.
Then can you post also strace of `vzctl enter`?
(http://wiki.openvz.org/Stracing_a_program)

Thanks!

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9746 is a reply to message #9731]

Fri, 19 January 2007 13:30

disaster
Messages: 158
Registered: February 2006

Senior Member

I'm not shure but i think it should be this bug that i've already reported and there is also a fix for that:

http://bugzilla.openvz.org/show_bug.cgi?id=398

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9747 is a reply to message #9731]

Fri, 19 January 2007 13:31

youp
Messages: 82
Registered: September 2005
Location: Belgium

Member

attached ...

Attachment: strace.out
(Size: 10.97KB, Downloaded 246 times)
Attachment: strace.out.31461
(Size: 78.42KB, Downloaded 245 times)

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9748 is a reply to message #9731]

Fri, 19 January 2007 13:33

disaster
Messages: 158
Registered: February 2006

Senior Member

Please read my post. I've had the same Problem and there is already a patch out there. If it is'nt a new bug.

Which Kernel version do you use?

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9749 is a reply to message #9747]

Fri, 19 January 2007 13:37

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

Seems, that disaster is right! Smile

Do you use kernel older then 2.6.18-028test10?
If "yes", then move to the latest.

Thanks.

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9750 is a reply to message #9731]

Fri, 19 January 2007 13:42

youp
Messages: 82
Registered: September 2005
Location: Belgium

Member

i use 2.6.18-028test007 , i try to rebuild with 2.6.18-028test10

thanks

Report message to a moderator

Re: Unable to open pty: Mo such file or directory [message #9754 is a reply to message #9731]

Fri, 19 January 2007 14:57

mperkel
Messages: 253
Registered: December 2006

Senior Member

In my case the /proc directory is empty. Apparently it's not running something that it should at startup to activate it. What should be in fstab?

How are the scripts in the /etc/vz/dists linking to the VE. I'm a little confused about how those scripts are run?

Junk Email Filter
http://www.junkemailfilter.com

Report message to a moderator