OpenVZ Forum: Support » *SOLVED* Errors when installing OpenVZ kernel

Home » General » Support » *SOLVED* Errors when installing OpenVZ kernel

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

*SOLVED* Errors when installing OpenVZ kernel [message #9578]

Thu, 11 January 2007 03:51

bards1888
Messages: 10
Registered: January 2006

Junior Member

I just installed the 2.6.9-023, x86_64 kernel on centos 4.4, via yum and it spewed out a few errors related to some modules;

WARNING: No module sata_sil found for kernel 2.6.9-023stab037.3-smp, continuing anyway
WARNING: No module sym53c8xx found for kernel 2.6.9-023stab037.3-smp, continuing anyway
WARNING: No module sata_nv found for kernel 2.6.9-023stab037.3-smp, continuing anyway
WARNING: No module raid0 found for kernel 2.6.9-023stab037.3-smp, continuing anyway
WARNING: No module raid1 found for kernel 2.6.9-023stab037.3-smp, continuing anyway

Installed: ovzkernel-smp.x86_64 0:2.6.9-023stab037.3
Complete!

--------------------

This system has 4 hard drives hanging of the nvidia sata controller. Some of these drives configured as raid0 and raid1 and lvm.

The sata_sil module is no longer used by this server so I've removed it with rmmod and removed it from.

I dont want to reboot this server now to find out if the system can still se my 'sata_nv' disks as it is at a remote site.

I was wondering if anyone can tell me if the sata_nv and other modules are compiled into this openvz kernel? I'm hoping it does as the kernel seems quite a bit larger than stock centos/redhats, eg almost 50% larger.

Cheers.

[Updated on: Thu, 11 January 2007 09:25] by Moderator

Report message to a moderator

Re: Errors when installing OpenVZ kernel [message #9579 is a reply to message #9578]

Thu, 11 January 2007 04:43

bards1888
Messages: 10
Registered: January 2006

Junior Member

I've just found the config for this kernel and it would appear that those modules are indeed compiled into the kernel.

Sorry for wasting electrons.

Report message to a moderator

Re: Errors when installing OpenVZ kernel [message #9960 is a reply to message #9579]

Wed, 31 January 2007 16:09

cimarron
Messages: 1
Registered: January 2007

Junior Member

Hello.
I am facing the same situation.
Remote server, same message about sata_via. In my case, grepping the kernel shows:

[root@localhost boot]# cat vmlinux-2.6.9-023stab040.1 | strings | grep -i sata_via
sata_via

So i can assume module is compiled in. But as i really want to be sure, please can you confirm me you were able to boot successfully this kernel?

Regards

Report message to a moderator

Previous Topic:	New Gentoo 2006.1 templates...
Next Topic:	Some problem !!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 02 14:27:25 GMT 2024

Total time taken to generate the page: 0.03208 seconds