*SOLVED* openvz and trixbox [message #9004] |
Wed, 13 December 2006 07:33 |
sanjooz_2002
Messages: 19 Registered: October 2006
|
Junior Member |
|
|
Hi,
I have successfully installed OpenVZ and have created 4 virtual servers on it. I have trixbox running in each one of them. I have subscribed for a VoIP number and connect the incoming call on that number to the dialplan. The registration of the VoIP number is successful. I could see the message 'registered' after typing "iax2 show registry" on the asterisk console. The problem is, when the above config is used in any one of my vps es (ofcourse after the unregistration of the VoIP number from other machines) the inbound call gets rejected by the vps. What is puzzling is this that, the same coniguration works perfectly fine on other systems .i.e the non OpenVZ ones.Im unsure if the prob is with OpenVZ or with trixbox.
And yes, by the way all the systems at my end run CentOS .i.e both virtual and the main hardware node. Can anyone help?Thanks in advance!
[Updated on: Fri, 22 December 2006 09:05] by Moderator Report message to a moderator
|
|
|
Re: openvz and trixbox [message #9024 is a reply to message #9004] |
Wed, 13 December 2006 15:47 |
rickb
Messages: 368 Registered: October 2006
|
Senior Member |
|
|
Hi,
First, copy your asterisk software to the HN, fire it up and try to receive the call. This will isolate whether the problem is a problem due to the environment being virtualized.
Are you reliant on the ztdummy/zaptel kernel modules? If so, you will need to grant each VE access:
for x in `ls /dev/zap`; do /usr/sbin/vzctl set VEID --devnodes zap/${x}:rw --save; done
Hope this helps or points you in the right direction.
Rick
-------------
Common Terms I post with: http://wiki.openvz.org/Category:Definitions
UBC. Learn it, love it, live it: http://wiki.openvz.org/Proc/user_beancounters
|
|
|
|
|
|
|