OpenVZ Forum


Home » General » Support » No module sata_nv found
No module sata_nv found [message #875] Tue, 17 January 2006 15:30 Go to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Hi ..

I just install ovzkernel, but get some problems with sata_nv module.

# rpm -ihv ovzkernel-2.6.8-022stab061.1.x86_64.rpm
warning: ovzkernel-2.6.8-022stab061.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6
Preparing... ########################################### [100%]
1:ovzkernel ########################################### [100%]
WARNING: No module sata_nv found for kernel 2.6.8-022stab061.1, continuing anyway

And this kernel cannot be booted.

Need help...

Thanks..

Report message to a moderator

Re: No module sata_nv found [message #876 is a reply to message #875] Tue, 17 January 2006 15:42 Go to previous messageGo to next message
Ronny is currently offline  Ronny
Messages: 23
Registered: January 2006
Junior Member
Hi

seems to be, that the Kernel doesn´t Support your SATA-Driver.

To-Do:

a) Load the Kernel Sources for 2.6.8
b) Install Patch from openvz
c) Load default .config file from openvz for the kernel
d) make menuconfig and choose the correct sata-driver, too
e) build your kernel
f) pray to god that it will work Smile

Regards,
Ronny

Report message to a moderator

Re: No module sata_nv found [message #877 is a reply to message #875] Tue, 17 January 2006 15:43 Go to previous messageGo to next message
kir is currently offline  kir
Messages: 1645
Registered: August 2005
Location: Moscow, Russia
Senior Member
"Warning" message from mkinitrd is just that -- a warning telling that there is no module sata_nv. Indeed in openvz kernel there is no such module, since it is compiled into kernel.

Still, it is strange that it is not booting. Can you please post or attach the output from the following comands here so we can investigate the case?

lspci
lspci -n
dmesg from a kernel you are able to boot

Kir Kolyshkin
http://static.openvz.org/userbars/openvz-developer.png

Report message to a moderator

Re: No module sata_nv found [message #878 is a reply to message #877] Tue, 17 January 2006 15:53 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Sure ...

# lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
05:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

# lspci -n
00:00.0 Class 0580: 10de:005e (rev a3)
00:01.0 Class 0601: 10de:0050 (rev a3)
00:01.1 Class 0c05: 10de:0052 (rev a2)
00:02.0 Class 0c03: 10de:005a (rev a2)
00:02.1 Class 0c03: 10de:005b (rev a3)
00:04.0 Class 0401: 10de:0059 (rev a2)
00:06.0 Class 0101: 10de:0053 (rev f2)
00:07.0 Class 0101: 10de:0054 (rev f3)
00:08.0 Class 0101: 10de:0055 (rev f3)
00:09.0 Class 0604: 10de:005c (rev a2)
00:0b.0 Class 0604: 10de:005d (rev a3)
00:0c.0 Class 0604: 10de:005d (rev a3)
00:0d.0 Class 0604: 10de:005d (rev a3)
00:0e.0 Class 0604: 10de:005d (rev a3)
00:18.0 Class 0600: 1022:1100
00:18.1 Class 0600: 1022:1101
00:18.2 Class 0600: 1022:1102
00:18.3 Class 0600: 1022:1103
01:00.0 Class 0300: 1002:5b60
01:00.1 Class 0380: 1002:5b70
05:07.0 Class 0200: 10ec:8169 (rev 10)

And then? Can I some how include the module during rpm installation?

I don't like to build my own kernel .. Razz
This should be my last try after I tried everything else.

Report message to a moderator

Re: No module sata_nv found [message #879 is a reply to message #878] Tue, 17 January 2006 16:00 Go to previous messageGo to next message
kir is currently offline  kir
Messages: 1645
Registered: August 2005
Location: Moscow, Russia
Senior Member
It looks like your SATA controller is indeed supported by OpenVZ kernel. So the reason it can not boot is probably different.

What exactly it tells you when it's not able to boot?

Can you also attach dmesg output from the kernel you are able to boot?

Kir Kolyshkin
http://static.openvz.org/userbars/openvz-developer.png

Report message to a moderator

Re: No module sata_nv found [message #882 is a reply to message #879] Tue, 17 January 2006 16:18 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Thanks Kir.

I sent you dmesg output file to your e-mail.
When it's not booting, it says:

Kernel panic: PCI-DMA: High addresses but no IOMMU.

Cahya

[Updated on: Tue, 17 January 2006 16:22]

Report message to a moderator

Re: No module sata_nv found [message #886 is a reply to message #875] Wed, 18 January 2006 08:48 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Can anybody tell me how to enable IOMMU? Confused
I'm using Asus A8N-E with BIOS Revision 1008. Unfortunately I cannot find anything about IOMMU on the BIOS setup.

I found out even on the running OS there is a warning regarding enabling IOMMU.
From dmesg:

...
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
Putting aperture at c0000000-c3ffffff
....

Thanks.

Report message to a moderator

Re: No module sata_nv found [message #887 is a reply to message #886] Wed, 18 January 2006 10:33 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
Hi,

I've seen the such sympthomps on 2.4 x86_64 kernels instaleld on Intel EMT64 CPU. ia32e kernel has resolved this issue.

However this is 2.6 kernel... I'll investigate this issue.

Thank you,
Vasily Averin

Report message to a moderator

Re: No module sata_nv found [message #895 is a reply to message #887] Wed, 18 January 2006 12:20 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Well, I'm now using 32bit OS on 64 bit Processor. It looks like that everything goes well right now.

But this should be only temporary solution. And somehow I'm not very satisfied. Razz
I really want to use 64 bit OS on 64 bit processor.

Report message to a moderator

Re: No module sata_nv found [message #898 is a reply to message #895] Wed, 18 January 2006 12:34 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
Hello Cahya,

I've looked at google and found that such panics happened even on the 2.6.14-rc kernels.
However for the investigation I need the full bootlog from our 64-bit kernel. There is only one way to get it: to attach the serial console (i mean simple null-modem serial cable) and dump the boot messages on the another node.
I would like to know, have you such possibility?

thank you,
Vasily Averin

Report message to a moderator

Re: No module sata_nv found [message #899 is a reply to message #898] Wed, 18 January 2006 12:43 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Hello Vasily,

unfortunately not. I had several PCs here, but all of them were pre-configured from the company's admin. The only PC I have full access is the one I want to install the OpenVZ. Sad

Anyway, I'm now trying to install x86_64 OS and install the OpenVZ kernel again. Smile

BTW, thanks for your quick answer.

Cahya

Report message to a moderator

Re: No module sata_nv found [message #901 is a reply to message #899] Wed, 18 January 2006 12:49 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
try to add " iommu=soft" into kernel commandline,
if it does not help, try to add "iommu=noagp".

Report message to a moderator

icon9.gif  Re: No module sata_nv found [message #903 is a reply to message #901] Wed, 18 January 2006 13:27 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
In case iommu=soft:

PC hang at boot-up with error:

Bringing up interface eth0: Kernel panic: map_single: could not allocate software IO TLB (1600 bytes)
In interrupt handler - not syncing

In case of iommu=noagp:

Kernel panic: PCI-DMA: high address but no IOMMU.
Also the same result as w/o kernel command.

I read on the other forum that someone had the same problem with IOMMU. The solution was to set IOMMU_DEBUG to yes. Do you know how to do that?
Or can we somehow disable IOMMU?

Quote:
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 4000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
...

[ 47.737770] PCI-DMA: Disabling IOMMU.

[Updated on: Wed, 18 January 2006 13:40]

Report message to a moderator

Re: No module sata_nv found [message #905 is a reply to message #903] Wed, 18 January 2006 13:41 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
cahya_s wrote on Wed, 18 January 2006 16:27


I read on the other forum that someone had the same problem with IOMMU. The solution was to set IOMMU_DEBUG to yes. Do you know how to do that?
Or can we somehow disable IOMMU?



As far as I understand the problem is that IOMMU is disabled already and I would like to understand the cause of this. Therefore I would like to see the full bootlogs.

I suspect you can boot the kernel with "mem=3G" in commandline

Thank you,
Vasily Averin

Report message to a moderator

icon14.gif  Re: No module sata_nv found [message #906 is a reply to message #905] Wed, 18 January 2006 13:59 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
You're right. It works now.
Could you gimme short explanation about this?
I'll let you know if the VPS can be installed too.

Thanks.

Report message to a moderator

Re: No module sata_nv found [message #909 is a reply to message #906] Wed, 18 January 2006 14:17 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
cahya_s wrote on Wed, 18 January 2006 16:59

You're right. It works now.
Could you gimme short explanation about this?
I'll let you know if the VPS can be installed too.

Thanks.


kernel panics when tried to access to the high memory area. I believe "high" mean that physical address is more than 4 Gb (32-bit). To handle these addresses kernel should use IOMMU, but it is disabled.

If we restrict the memory, we will not requiere an access to the high memory, will not use IOMMU and will not panics Smile

Could you please send me via pm /var/log/dmesg file from our kernel.

Thank you,
Vasily Averin

Report message to a moderator

Re: No module sata_nv found [message #910 is a reply to message #909] Wed, 18 January 2006 14:29 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
I got it now.
dmesg file should be in your PM now .. Smile
Thanks.
Cahya

Report message to a moderator

Re: No module sata_nv found [message #916 is a reply to message #909] Wed, 18 January 2006 15:05 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
The system is working, but after about 1 hour working it hangs again. Any suggestion??

Report message to a moderator

Re: No module sata_nv found [message #918 is a reply to message #916] Wed, 18 January 2006 15:46 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
About latest hang:
we would like to see the kernel error messages.

About kernel boot issue:
could you please confirm that the following messages present at the middle of the booting?

PCI-DMA: More than 4GB of RAM and no IOMMU
PCI-DMA: 32bit PCI IO may malfunction.

Thank you,
Vasily Averin

Report message to a moderator

Re: No module sata_nv found [message #919 is a reply to message #918] Wed, 18 January 2006 15:50 Go to previous messageGo to next message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Yes ...

There is such kind of message.

Report message to a moderator

Re: No module sata_nv found [message #930 is a reply to message #919] Thu, 19 January 2006 08:13 Go to previous messageGo to next message
vaverin is currently offline  vaverin
Messages: 708
Registered: September 2005
Senior Member
Andi Kleen suggest to use "pci=nommconf" as workaround
http://bugzilla.kernel.org/show_bug.cgi?id=5343

Report message to a moderator

Re: No module sata_nv found [message #932 is a reply to message #930] Thu, 19 January 2006 09:09 Go to previous message
cahya_s is currently offline  cahya_s
Messages: 17
Registered: January 2006
Junior Member
Due to time pressure I am forced to use 32-bit OS right now. It works fine with Fedora Core 4 i386. So I cannot test your suggestion at this time. I'm sorry about it.

As soon as I had chance I will continue the experiment again.

Thanks.
Cahya

Report message to a moderator

Previous Topic: yum update
Next Topic: sharing file between ve's - openvz versus virtuozzo
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Oct 18 23:19:18 GMT 2025

Total time taken to generate the page: 0.33738 seconds
Powered by FUDforum Powered by Virtuozzo Containers