OpenVZ Forum: Devel » [PATCH, try3, 0/3] Separate logfile and console loglevel

Home » Mailing lists » Devel » [PATCH, try3, 0/3] Separate logfile and console loglevel

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: [PATCH, try3, 0/3] Separate logfile and console loglevel [message #8820 is a reply to message #8816]

Thu, 07 December 2006 10:42

kfh
Messages: 28
Registered: October 2006

Junior Member

On Thursday den 7. December 2006 09:45, Igor Sukhih wrote:
> Kristian H�gh wrote:
> > Separate logfile and console loglevel
> > The separation is implemented as follows
> >
> > 1: split --verbose from LOG_LEVEL
> > verbose and LOG_LEVEL are both 0 as default
> > --verbose will not affect LOG_LEVEL and vice versa
>
> Is standard command line syntax supported --verbose[=]<id> ?
No. Will fix.
= is requied for <id>

> > 2: Make --verbose accept optional value. Add VERBOSE to vz.conf
> > VERBOSE=0 as default
> > --verbose[=value]
> > Increase or set the logging level.
> > No arguments will increase the current value by one.
>
> I don't like introducing the VERBOSE parameter. Why do you need so
> complex setup LOG_LEVEL, VERBOSE, --verbose?
> If you need to limit console verbosity use --verbose <id> command line
> option, by default console_level = log_level.
I would like more info in the logfile and a more quiet console.
To do that it is necessary to set LOG_LEVEL to 1 and then use --verbose=0
each time I invoke vzctl.
I think it is more complex :-)

> > 3: Make verbose=0 more quiet
> > Raise default LOG_LEVEL to 2 and VERBOSE to 1
> > Raise some logger(0, ...)
> > No logger() above 3
>
> I don't see the reason to change default LOG_LEVEL, level > 0 usually
> used for debug, all
I think level 0 is used for "debug" today.
When starting a VE using LOG_LEVEL=0, I get 10 lines of output.
I think "Running VE script: /etc/vz/dists/..." is debug.

The only(?) way I see to make level 0 more quiet is to raise "noise" [0]
to level 1 (and "Running VE script: ..." to level 2).
If LOG_LEVEL is raised to 1 the output should be the same as today level 0.
(Except "Running VE script: ...")

--quiet is to quiet.

[0] "Noise" when starting VE using level 0:
Setting CPU limit: 50
Setting CPU units: 1000
Configure meminfo: 10240
2 * "Running VE script: /etc/vz/dists/..."

> error messages are not controlled by --verbose, LOG_LEVEL and will be
> displayed any way.
> So if we only introduce --verbose <id> command line option is it not
> enough for you?
No, only if "noise" is moved to level 1.

> --
> Igor.
/Kristian.

Report message to a moderator

[Message index]

		[PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh.openvzmail on Wed, 06 December 2006 18:05
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: Igor Sukhih on Thu, 07 December 2006 08:45
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh on Thu, 07 December 2006 10:42
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh on Thu, 07 December 2006 11:14
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: Igor Sukhih on Thu, 07 December 2006 11:31
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh on Thu, 07 December 2006 12:09
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kir on Thu, 07 December 2006 12:31
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: Igor Sukhih on Thu, 07 December 2006 12:47
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: Mishin Dmitry on Thu, 07 December 2006 13:21
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kir on Thu, 07 December 2006 13:23
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh.openvzmail on Thu, 07 December 2006 15:46
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: Igor Sukhih on Thu, 07 December 2006 16:09
		Re: [PATCH, try3, 0/3] Separate logfile and console loglevel By: kfh.openvzmail on Thu, 07 December 2006 17:43

Previous Topic:	[PATCH 5/12] L2 network namespace: IPv4 routing
Next Topic:	[PATCH try4, 1/3] split verbose from LOG_LEVEL

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 13 04:29:51 GMT 2024

Total time taken to generate the page: 0.02884 seconds