| Re: OpenVZ and Gentoo (partly solved) [message #669 is a reply to message #652] |
Thu, 05 January 2006 14:11   |
wimalopaan
Messages: 15
Registered: January 2006
|
Junior Member |
|
|
The network issue is partly solved: I do not use the gentoo net.lo script for
net.venet0 anymore, instead I setup the interfaces venet0 and venet0:0 with
the attached workaround-script.
But, how do I bind-mount directories from to host to the VPS, e.g. to
use /usr/portage in the VPD too. If I try to (on host)
gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
I get
ovz01 usr # ls
bin i386-pc-linux-gnu include lib libexec local portage sbin share
src tmp
ovz01 usr # ls portage
ovz01 usr #
on the VPS ovz01. Whats wrong?
- Wilhelm
Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
> Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
> > so you run Gentoo inside VPS yeah?
>
> Well, I try to ...
>
> > the problem seems to be in your initscripts, which didn't mount /proc on
> > VPS start and didn't create /dev/ptyX entries for terminal devices.
> > Looks like the only process in your VPS is init, strange...
>
> I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
> in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is possible
> to enter the gentoo-VPS:
>
> gs ~ # vzctl enter 2001
> entered into VPS 2001
> ovz01 / # ps aux
> USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
> root 1 0.0 0.1 1368 480 ? Ss 17:06 0:00 ini
> root 14644 0.0 0.3 1740 780 ? Ss 17:14 0:00 vzctl:
> ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss 17:14 0:00 bash
> -i root 15671 0.0 0.3 2376 836 ttyp0 R+ 17:14 0:00 ps aux
> ovz01 / #
>
> I also copied /etc/init.d/net.lo to the VPS and some additional scripts,
> which are apparently missing.
> But in the gentoo-VPS I get still:
>
> ovz01 / # /etc/init.d/net.venet0 start
> * Starting
> * no interface module has been loaded
> ovz01 / #
> ovz01 / # /sbin/ifconfig -a
> lo Link encap:Local Loopback
> LOOPBACK MTU:16436 Metric:1
> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
>
> venet0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> ovz01 / #
>
> If I try that with a debian-guest on the gentoo-host, I get:
>
> gs ~ # vzctl enter 2002
> entered into VPS 2002
> root@ovz02:/# ifconfig -a
> lo Link encap:Local Loopback
> LOOPBACK MTU:16436 Metric:1
> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2660 (2.5 KiB) TX bytes:2660 (2.5 KiB)
>
> venet0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
> Mask:255.255.255.255
> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:252 (252.0 b) TX bytes:252 (252.0 b)
>
> venet0:0 Link encap:UNSPEC HWaddr
> 00-00-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00
> inet addr:192.168.39.22 P-t-P:192.168.39.22 Bcast:0.0.0.0
> Mask:255.255.255.255
> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
>
> root@ovz02:/#
>
> So the interface venet0:0 is missing in the gentoo-guest.
>
> > kir@ who is in charge of Gentoo will be available after Jan 7 only, but
> > I can check what's wrong with your VPS if you provide me the credentials
> > in private email.
> >
> > Kirill
> >
> > > Hi,
> > >
> > > I want to use OpenVZ with Gentoo. I did the install of OpenVZ as
> > > described in
> > >
> > > http://dev.croup.de/proj/gentoo-vps/wiki
> > >
> > > When I try to enter, I get:
> > >
> > > gs ~ # vzctl start 2001
> > > Starting VPS ...
> > > VPS is mounted
> > > Setting CPU units: 1000
> > > VPS start in progress...
> > > gs ~ # vzctl status 2001
> > > VPSID 2001 exist mounted running
> > > gs ~ # vzctl enter 2001
> > > Unable to open pty: No such file or directory
> > > enter failed
> > > gs ~ #
> > >
> > > and
> > >
> > > gs ~ # vzctl exec 2001 ps aux
> > > Error, do this: mount -t proc proc /proc
> > > gs ~ # vzctl exec 2001 mount -t proc none /proc
> > > gs ~ # vzctl exec 2001 ps aux
> > > USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
> > > COMMAND root 1 0.0 0.1 1368 480 ? Ss 00:30
> > > 0:00 ini root 22894 0.0 0.3 2372 832 ? Rs 00:31
> > > 0:00 ps aux gs ~ #
> > >
> > > Any hints?
> > > --
> > > Wilhelm Meier
> > > email: meier@informatik.fh-kl.de
--
--
Wilhelm Meier
email: meier@informatik.fh-kl.de
-
Attachment: net.venet0
(Size: 0.20KB, Downloaded 395 times)
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
