OpenVZ Forum: Support » [OVZ-7] Unable to select HD device where ovz-7 should be installed to (Virtualbox)

Home » General » Support » [OVZ-7] Unable to select HD device where ovz-7 should be installed to (Virtualbox) (Unable to select HD device when installing OVZ-7 from the 3515 installation ISO image using virtualbox as the hardware node )

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

[OVZ-7] Unable to select HD device where ovz-7 should be installed to (Virtualbox) [message #52552]

Fri, 09 September 2016 12:27

XavM
Messages: 5
Registered: April 2013
Location: France

Junior Member

When installing OVZ-7 from the 3515 installation ISO image ( https://download.openvz.org/virtuozzo/releases/7.0/x86_64/is o/openvz-iso-7.0.0-3515.iso),
can't go past the "INSTALLATION DESTNATION" step, because no "Local Standard Disks" listed is selectable; CF : https://drive.google.com/file/d/0BxquyC56EvMLc0tBSkw2Sk9reEk /view?usp=sharing

It used to work when installing form the Beta 3 installation ISO image; CF : https://drive.google.com/file/d/0BxquyC56EvMLVFNVVG5WbFhwRTg /view?usp=sharing

Only tryed using VirtualBox Version 5.0.26 r108824 on OSX 10.11.6 (15G1004)
Didn't try on bare metal

Is this a known bug ?
Is there a workaround ?

Regards,

Xavier

XavM

[Updated on: Wed, 14 September 2016 12:29]

Report message to a moderator

Re: [OVZ-7] Unable to select HD device where ovz-7 should be installed to (Virtualbox) [message #52561 is a reply to message #52552]

Wed, 14 September 2016 12:53

XavM
Messages: 5
Registered: April 2013
Location: France

Junior Member

I may have found a work around :

The OpenVZ installation guide states that some ssd may not be auto detectable by the installer : https://docs.openvz.org/openvz_installation_guide.pdf
and that one can force detection of SSDs (2.1.2. Enabling Forced Detection of SSDs)

Adding "ssd_hack=sda" to the linux line (Press E just after boot when prompted for "Install OpenVZ"), I have been able to check the "cache" radio button next to sda and manually configure the partitioning

Ex : linux /images/pxeboot/vmlinuz inst.stage2=hd:LABEL=openvz-iso-7.0.0-3469.iso quiet ip=dhcp ssd_hack=sdb,sdc

XavM

[Updated on: Wed, 14 September 2016 14:23]

Report message to a moderator

Previous Topic:	vzmigrate and NEW VEID
Next Topic:	slow disk i/o

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 29 00:35:28 GMT 2025

Total time taken to generate the page: 0.20272 seconds