| Transparent tcp proxy with haproxy in OpenVZ container [message #51625] |
Thu, 28 August 2014 11:10  |
grizzly
Messages: 8
Registered: August 2014
|
Junior Member |
|
|
Hello!
Is there any chance to set Transparent tcp proxy in vz container with haproxy?
Tried to set testing environment based on howto from haproxy blog but had no luck 
What I did:
1. Enabled all modules for NETFILTER in container and restartded CT:
# cat /etc/vz/conf/105.conf | grep NETFILTER
NETFILTER="full"
2. Enabled 'nonlocal_bind' and 'net.ipv4.ip_forward' on HN and СТ
HN: # sysctl -a | grep -E 'ip_forward|nonlocal_bind'
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
CT: # sysctl -a | grep -E 'ip_forward|nonlocal_bind'
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
3. Added mangle rules and routes to CT:
iptables -t mangle -N DIVERT
iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
iptables -t mangle -A DIVERT -j MARK --set-mark 1
iptables -t mangle -A DIVERT -j ACCEPT
ip rule add fwmark 1 lookup 100
ip route add local 0.0.0.0/0 dev lo table 100
CT# iptables -t nat -L && iptables -t filter -L && iptables -t mangle -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
DIVERT tcp -- anywhere anywhere socket
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
Chain DIVERT (1 references)
target prot opt source destination
MARK all -- anywhere anywhere MARK set 0x1
ACCEPT all -- anywhere anywhere
CT# ip rule list
0: from all lookup local
32765: from all fwmark 0x1 lookup 100
32766: from all lookup main
32767: from all lookup default
4. Build haproxy RPM with TPROXY:
CT# haproxy -vv
HA-Proxy version 1.5.3 2014/07/25
Copyright 2000-2014 Willy Tarreau <w@1wt.eu>
Build options :
TARGET = linux26
CPU = native
CC = gcc
CFLAGS = -m64 -march=x86-64 -O2 -march=native -g -fno-strict-aliasing
OPTIONS = USE_LINUX_TPROXY=1 USE_ZLIB=1 USE_NETFILTER=1 USE_PCRE=1
5. Configurred haproxy to catch marked packets
global
log 127.0.0.1 local0
log 127.0.0.1 local1 notice
maxconn 4096
daemon
defaults
log global
mode tcp
option tcplog
option dontlognull
retries 3
option redispatch
maxconn 2000
timeout connect 5000
timeout client 50000
timeout server 50000
frontend smtp_in
bind *:587 transparent
default_backend smtp_out
backend smtp_out
source 0.0.0.0 usesrc clientip
server mx 10.1.1.102:587 check
6. Testing
telnet> quit
Connection closed.
$ telnet <public_ip> 587
Trying <public_ip>...
Connected to <public_ip>.
Escape character is '^]'.
and nothing happends...
CT# tcpdump -i lo
shows no activity during telnetting 587 port
When commenting 'source 0.0.0.0 usesrc clientip' all works except that proxy is not transparent
$ telnet <public_ip> 587
Trying <public_ip>...
Connected to <public_ip>.
Escape character is '^]'.
220 mx.domain.com ESMTP
^]
When setting same on HN - transparent proxy works great
uname -a
Linux domain.com 2.6.32-042stab093.4
rpm -qa | grep vz
vzctl-core-4.7.2-1.x86_64
vzquota-3.1-1.x86_64
vzkernel-2.6.32-042stab093.4.x86_64
vzstats-0.5.3-1.noarch
vzctl-4.7.2-1.x86_64
vzdump-1.2-4.noarch
e2fsprogs-resize2fs-static-1.42.11-1.ovz.x86_64
CT# ip rule list
0: from all lookup local
32765: from all fwmark 0x1 lookup 100
32766: from all lookup main
32767: from all lookup default
Will appreciate for help!
[Updated on: Thu, 28 August 2014 12:47] Report message to a moderator |
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
