| FUSE not working in container on Debian7 x64 [message #50953] |
Tue, 10 December 2013 19:06  |
webs1821
Messages: 2
Registered: December 2013
Location: Poland
|
Junior Member |
|
|
Hi!
I've got a problem with running Fuse on container with Debian 7 x64.
First I read openvz.org/FUSE and asked my VPS provider to enable Fuse, he did it and I got fuse in /dev/ but it still doesn't work.
I asked my provider for a help but he told me that this is how it looks in this virtualization and fuse will not work.
Please, tell me if is it true and what can be wrong?
I tried to run fuse on debian7 x64 and x86, fedora 19 x64 and debian6 x64.
I tried also compile fuse from source.
Below I show my steps on fresh debian7 x64:
root@vps:~# apt-get update
root@vps:~# apt-get upgrade
root@vps:~# apt-get install libfuse2 fuse curlftpfs
root@vps:~# reboot
root@vps:~# curlftpfs -o user=login:pass ftp.server.com /mnt
fuse: device not found, try 'modprobe fuse' first
root@vps:~# modprobe fuse
libkmod: ERROR ../libkmod/libkmod.c:505 kmod_lookup_alias_from_builtin_file: could not open builtin file '/lib/modules/2.6.32-042stab083.2/modules.builtin.bin'
FATAL: Module fuse not found.
root@vps:~# ls -la /lib/modules/2.6.32-042stab083.2/
total 36
drwxr-xr-x 2 root root 4096 Dec 10 04:11 .
drwxr-xr-x 3 root root 4096 Dec 10 04:11 ..
-rw-r--r-- 1 root root 45 Dec 10 04:11 modules.alias
-rw-r--r-- 1 root root 12 Dec 10 04:11 modules.alias.bin
-rw-r--r-- 1 root root 0 Dec 10 04:11 modules.builtin.bin
-rw-r--r-- 1 root root 0 Dec 10 04:11 modules.dep
-rw-r--r-- 1 root root 12 Dec 10 04:11 modules.dep.bin
-rw-r--r-- 1 root root 52 Dec 10 04:11 modules.devname
-rw-r--r-- 1 root root 131 Dec 10 04:11 modules.softdep
-rw-r--r-- 1 root root 49 Dec 10 04:11 modules.symbols
-rw-r--r-- 1 root root 12 Dec 10 04:11 modules.symbols.bin
root@vps:~# ls -la /dev/fuse*
crw-rw---T 1 root fuse 10, 229 Dec 10 04:11 /dev/fuse
root@vps:~# uname -a
Linux vps 2.6.32-042stab083.2 #1 SMP Fri Nov 8 18:08:40 MSK 2013 x86_64 GNU/Linux
|
|
|
|
|
|
| Re: FUSE not working in container on Debian7 x64 [message #50958 is a reply to message #50957] |
Thu, 12 December 2013 21:36  |
webs1821
Messages: 2
Registered: December 2013
Location: Poland
|
Junior Member |
|
|
@kir, thank you for reply.
I wrote in third line of my post that I've read openvz.org/FUSE.
I just finished reading it again.
On fresh system I compiled and installed fuse-2.6.0.
Modprobe still give me the same errors.
On openvz.org/FUSE I'm not sure what should I do with kernel.
I have 2.6.32-042stab083.2, once I tried to install 084.12 from http : //download.openvz.org/debian/dists/wheezy/main/binary-amd64/ kernel/ but kernel version stays the same.
[Updated on: Thu, 12 December 2013 21:42] Report message to a moderator |
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
