Hello there,
i have reinstalled my HN server OS & installed OpenVZ on centos but i got the following problems :
the /vz directory doesnt contain any folders under it !!
the vz init script doesnt exist too !!
- some valuable information
i have installed the following OpenVZ softwares :
ovzkernel-devel-2.6.18-308.el5.028stab099.3
ploop-1.2-1
vzctl-lib-3.2-1
ovzkernel-2.6.18-308.el5.028stab099.3
vzquota-3.0.12-1
ploop-lib-1.2-1
ploop-devel-1.2-1
server architecture
Operating System (64 bit OS)
CentOS release 5.8 (Final)
RAID level 1 implemented
md0 : active raid1 sdb1[1] sda1[0]
33553344 blocks [2/2] [UU]
md1 : active raid1 sdb2[1] sda2[0]
524224 blocks [2/2] [UU]
md3 : active raid1 sdb5[1] sda5[0]
1822445440 blocks [2/2] [UU]
md2 : active raid1 sdb3[1] sda3[0]
1073741760 blocks [2/2] [UU]
this is HN file system layout
Filesystem Size Used Avail Use% Mounted on
/dev/md2 1016G 1.2G 964G 1% /
/dev/md1 496M 47M 424M 10% /boot
/dev/md3 1.7T 196M 1.6T 1% /vz
this is mounted file systems
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/md0 none swap sw 0 0
/dev/md1 /boot ext3 defaults 0 0
/dev/md2 / ext4 defaults 0 0
/dev/md3 /vz ext4 defaults,usrquota 0 0
this is server memory & swap (double physical ram)
total used free shared buffers cached
Mem: 15962 117 15845 0 8 34
-/+ buffers/cache: 74 15888
Swap: 32766 0 32766
this is the contents of HN sysctl.conf
# packet forwarding enabled and proxy arp disabled
net.ipv4.ip_forward = 1
net.ipv4.conf.default.proxy_arp = 0
# Enables source route verification
net.ipv4.conf.all.rp_filter = 1
# Enables the magic-sysrq key
kernel.sysrq = 1
# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn = 0
# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
this is contents of grub.conf
timeout 5
default 1
title CentOS (2.6.18-308.4.1.el5)
root (hd0,1)
kernel /vmlinuz-2.6.18-308.4.1.el5 ro root=/dev/md2 nomodeset selinux=0
initrd /initrd-2.6.18-308.4.1.el5.img
title OpenVZ (2.6.18-308.el5.028stab099.3)
root (hd0,1)
kernel /vmlinuz-2.6.18-308.el5.028stab099.3 ro root=/dev/md2 nomodeset selinux=0
initrd /initrd-2.6.18-308.el5.028stab099.3.img
title CentOS (2.6.18-308.1.1.el5)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-308.1.1.el5 ro root=/dev/md2 nomodeset
initrd /boot/initrd-2.6.18-308.1.1.el5.img
firewall in HN is disabled
selinux is disabled too
what is the root cause of this problem then ???
ps: this is the third failed retry
any help will be appretiated
please all accept my best regards,,
OpenVZ Forum
Members
Search
Help
Register
Login
Home
