OpenVZ Forum: Support » Heartbeat+openvz

Home » General » Support » Heartbeat+openvz (simple openvz+heartbeat)

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Heartbeat+openvz [message #45095]

Fri, 27 January 2012 22:11

mitsuoyazawa
Messages: 1
Registered: January 2012

Junior Member

Hi,

I have 2 machines running CentOS6.2 with openvz
with 4 VE's on each machine.

4 of this VE's are identical to the other (in the other machine)
so lets say....
PC1:1001-1004 = PC2:1001-1004

what i need its that if PC1 fails. heartbeat turns on 1001-1004 on PC2

I have the following configuration.
ha.cf
logfacility daemon
node node01
node node02
keepalive 1
warntime 10
deadtime 30
initdead 120
udpport 694
ucast em1 192.168.1.2
ucast em1 192.168.1.3
auto_failback off

haresources
node01 vzha

vzha, its a script that does vzctl start 1001 - 1004
or stop them.
-------------------------
everything works fine. my problem is that
node01 thinks node02 is down, and
node02 thinks node02 is down.
So I have a split-brain issue.

maybe someone can help me with this issue. thanks.

Report message to a moderator

Re: Heartbeat+openvz [message #45301 is a reply to message #45095]

Thu, 23 February 2012 14:53

seanfulton
Messages: 105
Registered: May 2007

Senior Member

This is a heartbeat problem not an openvz problem. Check /var/log/messages. Make sure you can ping between the hosts. Also, try adding the following to your ha.cf:

ping_group [ list of valid routers or hosts ]

If the two can't see each other, check firewall configs??

But it's not an OpenVZ issue. heartbeat should work fine, and your configs look OK to me.

sean

Report message to a moderator

Previous Topic:	CPU stuck for 67s!
Next Topic:	Swap with non-VSwap kernel

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 21 09:57:44 GMT 2026

Total time taken to generate the page: 1.20829 seconds