OpenVZ Forum: Support » Resource issues

Home » General » Support » Resource issues

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Resource issues [message #44637]

Mon, 19 December 2011 05:30

viniciusmunich
Messages: 4
Registered: December 2011
Location: Boston, MA

Junior Member

Hello, I'm having some trouble allocating resources using openvz. It simply ignores memory limits, and does not allocate the CPU correctly.

Below are some details:

[root@skywalker ~]# vzcpucheck
Current CPU utilization: 10064
Power of the node: 1276960

On host:

[root@skywalker ~]# cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6385.84
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 1
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 3201.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 2
cpu cores	: 4
apicid		: 4
initial apicid	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 3
cpu cores	: 4
apicid		: 6
initial apicid	: 6
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 4
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 0
cpu cores	: 4
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 5
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 1
cpu cores	: 4
apicid		: 3
initial apicid	: 3
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 6
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 2
cpu cores	: 4
apicid		: 5
initial apicid	: 5
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 7
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 1600.000
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 3
cpu cores	: 4
apicid		: 7
initial apicid	: 7
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

Note: I do not know why in some nuclei is shown 1600MHz.

Now in virtual machine 101 .. :

[root@skywalker ~]# vzctl enter 101
entered into CT 101
root@aurora [/]# cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 179.595
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6385.84
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 359.190
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 1
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid
bogomips	: 6384.67
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 42
model name	: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
stepping	: 7
cpu MHz		: 314.061
cache size	: 8192 KB
physical id	: 0
siblings	: 8
core id		: 2
cpu cores	: 4
apicid		: 4
initial apicid	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi

...

[ Show the rest of the message ]

Report message to a moderator

Re: Resource issues [message #44639 is a reply to message #44637]

Mon, 19 December 2011 08:29

Paparaciz
Messages: 302
Registered: August 2009

Senior Member

for memory settings please read this article:
http://wiki.openvz.org/Vswap

on rhel6 based kernel you set memory limit with physpages parameter

take a look to ve-vswap-*.conf-sample config files

about cpu
You have set some with cpulimit and maybe other cpu related parameters
if you want set it to unlimited set --cpulimit 0

if you have more questions please paste CT config file

Report message to a moderator

Re: Resource issues [message #44640 is a reply to message #44639]

Mon, 19 December 2011 08:54

viniciusmunich
Messages: 4
Registered: December 2011
Location: Boston, MA

Junior Member

Paparaciz, thank you for your reply.
When I set CPU Units to be 0, I received this error:

[root@skywalker conf]# vzctl restart 101
Warning at /etc/vz/conf/101.conf:36: invalid value for CPUUNITS ("0"), skipped
Restarting container
Stopping container ...
Container was stopped
Container is unmounted
Starting container ...
Container is mounted
Adding IP address(es): 216.245.217.125 216.245.217.126 64.31.32.133 64.31.32.134
Setting CPU limit: 90
Setting CPU units: 1000
Setting CPUs: 8
Container start in progress...

"Setting CPU units: 1000"

My CT file:

##############################################
## SIMUZO OpenVZ Default Configuration File ##
##############################################

ONBOOT="yes"

# UBC parameters (in form of barrier:limit)
KMEMSIZE="2147483647:2147483647"
LOCKEDPAGES="999999:999999"
PRIVVMPAGES="792576"
SHMPAGES="792576"
NUMPROC="32567:32567"
PHYSPAGES="0:2147483647"
VMGUARPAGES="792576"
OOMGUARPAGES="792576"
NUMTCPSOCK="7999992:7999992"
NUMFLOCK="999999:999999"
NUMPTY="255:255"
NUMSIGINFO="1024:1024"
NUMSIGINFO="1024:1024"
TCPSNDBUF="214748160:396774400"
TCPRCVBUF="214748160:396774400"
OTHERSOCKBUF="214748160:396774400"
DGRAMRCVBUF="214748160:396774400"
NUMOTHERSOCK="7999992:7999992"
DCACHESIZE="2147483647:2147483647"
NUMFILE="23999976:23999976"
AVNUMPROC="180:180"
NUMIPTENT="999999:999999"


# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="419430400:419430400"
DISKINODES="48000000:48000000"
QUOTATIME="0"

# CPU fair sheduler parameter
CPUUNITS="0"

VE_ROOT="/vz/root/$VEID"
VE_PRIVATE="/vz/private/$VEID"
OSTEMPLATE="centos-5-x86_64"
ORIGIN_SAMPLE="vps.basic"
IP_ADDRESS="xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx"
HOSTNAME="hostname"
NAMESERVER="208.115.254.242 208.115.254.250"
QUOTAUGIDLIMIT="10000"
IOPRIO="0"
CPULIMIT="90"
CPUS="8"

When I set CPUS=4

Total processors: 4

Processor #1

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        359.190 MHz

    Cache
        8192 KB

Processor #2

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        359.190 MHz

    Cache
        8192 KB

Processor #3

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        359.190 MHz

    Cache
        8192 KB

Processor #4

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        359.190 MHz

    Cache
        8192 KB

CPUS=2

Total processors: 2

Processor #1

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        1438.602 MHz

    Cache
        8192 KB

Processor #2

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        719.301 MHz

    Cache
        8192 KB

CPUS=1

Total processors: 1

Processor #1

    Vendor
        GenuineIntel

    Name
        Intel(R) Xeon(R) CPU E31230 @ 3.20GHz

    Speed
        1438.602 MHz

    Cache
        8192 KB

I cannot understand..

[Updated on: Mon, 19 December 2011 09:07]

Report message to a moderator

Re: Resource issues [message #44642 is a reply to message #44639]

Mon, 19 December 2011 09:05

Paparaciz
Messages: 302
Registered: August 2009

Senior Member

I said cpulimit, not cpuunits

in your config you are setting limit 90

please take a note, that to calculate cpulimit you have to sum all cores which you give for CT
so if you have 8 cores cpu all power is 800%
8cores*100% = 800
if you want that CT don't use more than 50% of cpu you have to set it to 400
with limit 90 you set ~10% of cpu power.

if you set for CT 2 cores (--cpus X)
than to calculate limits you need to sum: 2cores*100%=200%
with limit 90 it would be little bit less than 50%

Report message to a moderator

Re: Resource issues [message #44643 is a reply to message #44642]

Mon, 19 December 2011 09:18

viniciusmunich
Messages: 4
Registered: December 2011
Location: Boston, MA

Junior Member

Oh, thank you so much! It worked Smile

Sorry to have confused cpuunits with cpulimit.

Could explain to me how I should configure the memory limit with 6 RHEL kernel?

Report message to a moderator

Re: Resource issues [message #44644 is a reply to message #44643]

Mon, 19 December 2011 09:23

Paparaciz
Messages: 302
Registered: August 2009

Senior Member

As I said:

for memory settings please read this article:
http://wiki.openvz.org/Vswap

on rhel6 based kernel you set memory limit with physpages parameter

take a look to ve-vswap-*.conf-sample config files

Report message to a moderator

Re: Resource issues [message #44646 is a reply to message #44644]

Mon, 19 December 2011 09:49

viniciusmunich
Messages: 4
Registered: December 2011
Location: Boston, MA

Junior Member

Thanks again,
I set using the commands:
vzctl set VMID --swappages: XXXXM --save
vzctl set VMID ---physpages: XXXXM --save

Problem solved =)

Report message to a moderator

Previous Topic:	Sound in Virtual machine
Next Topic:	Another Centos 6 network problem

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 02 10:16:55 GMT 2024

Total time taken to generate the page: 0.04094 seconds