# cat dmesg
Linux version 2.6.18-238.9.1.el5.028stab089.1 (root@rhel5-build-x64) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Apr 14 14:06:01 MSD 2011
Command line: ro root=LABEL=/ selinux=0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
BIOS-e820: 00000000bf7a0000 - 00000000bf7ad000 (ACPI data)
BIOS-e820: 00000000bf7ad000 - 00000000bf7ae000 (ACPI NVS)
BIOS-e820: 00000000bf7ae000 - 00000000bf7ff000 (reserved)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.6 present.
ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6da0
ACPI: XSDT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000bf7a8605
ACPI: FADT (v003 HP LYNNFLD 0x06040000 PTL 0x00000002) @ 0x00000000bf7ac675
ACPI: TCPA (v001 HP ProLiant 0x06040000 LOHR 0x0000005a) @ 0x00000000bf7ac769
ACPI: SSDT (v001 INTEL PPM RCM 0x80000001 INTL 0x20061109) @ 0x00000000bf7a05a9
ACPI: SPMI (v005 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7ac7bf
ACPI: EINJ (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7ac7ff
ACPI: HEST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7ac9af
ACPI: BERT (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7acad7
ACPI: SSDT (v001 HP ProLiant 0x06040000 INTL 0x20050624) @ 0x00000000bf7acb07
ACPI: ERST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7acbe8
ACPI: MADT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000bf7ace58
ACPI: MCFG (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000bf7acf14
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x00000000bf7acf50
ACPI: BOOT (v001 HP ProLiant 0x06040000 LTP 0x00000001) @ 0x00000000bf7acf88
ACPI: SPCR (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000bf7acfb0
ACPI: DSDT (v001 HP ProLiant 0x06040000 MSFT 0x03000000) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
bootmap start 100000 pages 136
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-440000
On node 0 totalpages: 4120966
DMA zone: 2470 pages, LIFO batch:0
DMA32 zone: 763872 pages, LIFO batch:31
Normal zone: 3354624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
Processor #1 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
Processor #3 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
Processor #5 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 7:14 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 000000000009e000
Nosave address range: 000000000009e000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000dc000
Nosave address range: 00000000000dc000 - 0000000000100000
Nosave address range: 00000000bf7a0000 - 00000000bf7ad000
Nosave address range: 00000000bf7ad000 - 00000000bf7ae000
Nosave address range: 00000000bf7ae000 - 00000000bf7ff000
Nosave address range: 00000000bf7ff000 - 00000000bf800000
Nosave address range: 00000000bf800000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec10000
Nosave address range: 00000000fec10000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ff000000
Nosave address range: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Built 1 zonelists. Total pages: 4120966
Kernel command line: ro root=LABEL=/ selinux=0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x2860000 - 0x6860000
Memory: 16390040k/17825792k available (2591k kernel code, 378140k reserved, 1388k data, 236k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.11 BogoMIPS (lpj=2527059)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20060707
Page beancounter hash is 2097152 entries.
Page locks hash is 524288 entries.
Using local APIC timer interrupts.
Detected 8.312 MHz APIC timer.
Booting processor 1/8 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5053.89 BogoMIPS (lpj=2526947)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 2/8 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 5053.90 BogoMIPS (lpj=2526951)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 3/8 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=2526982)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 4/8 APIC 0x1
Initializing CPU#4
Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=2526983)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 5/8 APIC 0x3
Initializing CPU#5
Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=2526985)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 6/8 APIC 0x5
Initializing CPU#6
Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=2526987)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=2526985)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Brought up 8 CPUs
CPU#0: NMI watchdog performance counter calibration - 581->601
CPU#1: NMI watchdog performance counter calibration - 61->81
CPU#2: NMI watchdog performance counter calibration - 61->81
CPU#3: NMI watchdog performance counter calibration - 61->81
CPU#4: NMI watchdog performance counter calibration - 60->80
CPU#5: NMI watchdog performance counter calibration - 60->