Home » Mailing lists » Users » Problem with /proc/vz/veinfo
| Problem with /proc/vz/veinfo [message #4141] |
Thu, 29 June 2006 15:28  |
Rachid Abdoun
Messages: 12
Registered: June 2006
|
Junior Member |
|
|
Hi,
I'm running a debian sarge 3.1 with kernel 2.6.16 with this patch
http://download.openvz.org/kernel/devel/026test014.4/patches /
patch-026test014-combined.gz and i installed the latest tools :
phoenix:~# vzctl --version
vzctl version 3.0.10
phoenix:~# vzquota --version
Vzquota version 2.5.0
when i list the virual personal servers i have this errorS :
phoenix:~# vzlist
Unable to open /proc/vz/veinfo
VPS not fouun
and when I stop a server I have this :
phoenix:~# vzctl stop 101
Unable to open /proc/vz/veinfo: No such file or directory
Stopping VPS ...
what's happen? Could someone help me?
Thank you
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4142 is a reply to message #4141] |
Thu, 29 June 2006 15:40  |
|
|
Looks like OpenVZ kernel modules are not loaded.
Have you started vz subsystem? I mean running
/etc/init.d/vz start
Rachid Abdoun wrote:
> Hi,
>
> I'm running a debian sarge 3.1 with kernel 2.6.16 with this
> patch http://download.openvz.org/kernel/devel/026test014.4/patches /patch-026test014-combined.gz
> and i installed the latest tools :
>
> phoenix:~# vzctl --version
> vzctl version 3.0.10
>
> phoenix:~# vzquota --version
> Vzquota version 2.5.0
>
> when i list the virual personal servers i have this *errorS* :
>
> *phoenix:~# vzlist *
> *Unable to open /proc/vz/veinfo*
> *VPS not fouun*
>
> and when I stop a server I have this :
>
> *phoenix:~# vzctl stop 101*
> *Unable to open /proc/vz/veinfo: No such file or directory*
> *Stopping VPS ...*
>
> what's happen? Could someone help me?
>
> Thank you
|
|
|
|
|
|
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4191 is a reply to message #4190] |
Sat, 01 July 2006 14:42 |
 |
curx
Messages: 739
Registered: February 2006
Location: Nürnberg, Germany
|
Senior Member |
|
|
Hi,
More questions: :-)
Boot your system the right kernel -> have you modified your bootloader
e.g. grub or lilo ?
Which version show "uname -r" ?
Are the modules "vzmon vzdquota vzdev" loaded ?
Are the modules on the right place :
/lib/modules/`uname -r`/kernel/kernel/vzmon.ko
/lib/modules/`uname -r`/kernel/fs/vzdquota.ko
/lib/modules/`uname -r`/kernel/kernel/vzdev.ko
Can load manually the module above, and listed by lsmod ?
Thorsten
At Sa, 1.07.2006, 13:53, wrote Rachid Abdoun:
> Yes i build myself
>
> I use this config http://download.openvz.org/kernel/devel/
> 026test014.4/configs/kernel-2.6.16-026test014-i686.config.ov z to
> build it....
>
> What can I do?
>
> Thank you
>
> Le 1 juil. 06 à 10:09, Thorsten Schifferdecker a écrit :
>
>> Hi,
>>
>> have you build your own kernel and enabled the modules needed
>> for openvz ?
>>
>> Thorsten
>>
>> At Sa, 1.07.2006, 02:15, wrote Rachid Abdoun:
>>> Yes I did :
>>>
>>> phoenix:~# /etc/init.d/vz start
>>> Starting OpenVZ: ..done
>>> phoenix:~# vzlist
>>> Unable to open /proc/vz/veinfo
>>> VPS not found
>>>
>>> I'm running debian sarge 3.1 what can I do?
>>>
>>> Le 29 juin 06 à 17:40, Kir Kolyshkin a écrit :
>>>
>>>> Looks like OpenVZ kernel modules are not loaded.
>>>>
>>>> Have you started vz subsystem? I mean running
>>>> /etc/init.d/vz start
>>>>
>>>> Rachid Abdoun wrote:
>>>>> Hi,
>>>>>
>>>>> I'm running a debian sarge 3.1 with kernel 2.6.16 with this
>>>>> patch http://download.openvz.org/kernel/devel/026test014.4/patches /
>>>>> patch-026test014-combined.gz
>>>>> and i installed the latest tools :
>>>>>
>>>>> phoenix:~# vzctl --version
>>>>> vzctl version 3.0.10
>>>>>
>>>>> phoenix:~# vzquota --version
>>>>> Vzquota version 2.5.0
>>>>>
>>>>> when i list the virual personal servers i have this *errorS* :
>>>>>
>>>>> *phoenix:~# vzlist *
>>>>> *Unable to open /proc/vz/veinfo*
>>>>> *VPS not fouun*
>>>>>
>>>>> and when I stop a server I have this :
>>>>>
>>>>> *phoenix:~# vzctl stop 101*
>>>>> *Unable to open /proc/vz/veinfo: No such file or directory*
>>>>> *Stopping VPS ...*
>>>>>
>>>>> what's happen? Could someone help me?
>>>>>
>>>>> Thank you
>>
|
|
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4253 is a reply to message #4191] |
Tue, 04 July 2006 09:09 |
Rachid Abdoun
Messages: 12
Registered: June 2006
|
Junior Member |
|
|
Hi,
More responses: :-)
Boot your system the right kernel -> have you modified your bootloader
e.g. grub or lilo ?
I use grub check my menu.lst :
title OpenVZ , kernel 2.6.16-026test014
root (hd0,0)
kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro
savedefault
boot
title OpenVZ , kernel 2.6.16-026test014 (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro single
savedefault
boot
title Debian GNU/Linux, kernel 2.6.8-2-386
root (hd0,0)
kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro
initrd /initrd.img-2.6.8-2-386
savedefault
boot
title Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode)
root (hd0,0)
kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro single
initrd /initrd.img-2.6.8-2-386
savedefault
boot
Which version show "uname -r" ?
phoenix:~# uname -r
2.6.16-026test014
Are the modules "vzmon vzdquota vzdev" loaded ?
phoenix:~# lsmod | grep vzmon
vzmon 45984 2 vzrst,vzcpt
vzdev 2468 2 vzdquota,vzmon
phoenix:~# lsmod | grep vzquota
=> Nothing!
Are the modules on the right place :
/lib/modules/`uname -r`/kernel/kernel/vzmon.ko
bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzmon.ko:
Permission non accord?e
/lib/modules/`uname -r`/kernel/fs/vzdquota.ko
bash: /lib/modules/2.6.16-026test014/kernel/fs/vzdquota.ko:
Permission non accord?e
/lib/modules/`uname -r`/kernel/kernel/vzdev.ko
bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzdev.ko:
Permission non accord?e
I still have a problem :
phoenix:~# vzctl start 101
Starting VPS ...
VPS is mounted
Adding IP address(es): 192.168.2.1
Unable to add IP 192.168.2.1: Inappropriate ioctl for device
Unable to del IP 192.168.2.1: Inappropriate ioctl for device
VPS start failed
Stopping VPS ...
VPS was stopped
vzquota : (error) Quota off syscall for id 101: Device or resource busy
vzquota off failed [3]
Conf file of 101 :
phoenix:~# cat /etc/vz/conf/101.conf
# Copyright (C) 2000-2006 SWsoft. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
#
ONBOOT="no"
# UBC parameters (in form of barrier:limit)
# Primary parameters
AVNUMPROC="40:40"
NUMPROC="65:65"
NUMTCPSOCK="80:80"
NUMOTHERSOCK="80:80"
VMGUARPAGES="6144:2147483647"
# Secondary parameters
KMEMSIZE="2752512:2936012"
TCPSNDBUF="319488:524288"
TCPRCVBUF="319488:524288"
OTHERSOCKBUF="132096:336896"
DGRAMRCVBUF="132096:132096"
OOMGUARPAGES="6144:2147483647"
# Auxiliary parameters
LOCKEDPAGES="32:32"
SHMPAGES="8192:8192"
PRIVVMPAGES="49152:53575"
NUMFILE="2048:2048"
NUMFLOCK="100:110"
NUMPTY="16:16"
NUMSIGINFO="256:256"
DCACHESIZE="1048576:1097728"
PHYSPAGES="0:2147483647"
NUMIPTENT="128:128"
# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="1048576:1153434"
DISKINODES="200000:220000"
QUOTATIME="0"
# CPU fair sheduler parameter
CPUUNITS="1000"
VE_ROOT="/var/lib/vz/root/$VEID"
VE_PRIVATE="/var/lib/vz/private/$VEID"
OSTEMPLATE="debian-3.1-i386-minimal"
ORIGIN_SAMPLE="vps.basic"
HOSTNAME="vps101"
NAMESERVER="192.168.1.1"
VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
IP_ADDRESS="192.168.2.1"
phoenix:~#
Can load manually the module above, and listed by lsmod ?
Yes but that don't resolve the problem...
Whay can I do? Thanks!!!
Rachid
Le 1 juil. 06 à 16:42, Thorsten Schifferdecker a écrit :
> Hi,
>
> More questions: :-)
>
> Boot your system the right kernel -> have you modified your bootloader
> e.g. grub or lilo ?
>
> Which version show "uname -r" ?
>
> Are the modules "vzmon vzdquota vzdev" loaded ?
>
> Are the modules on the right place :
> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>
> Can load manually the module above, and listed by lsmod ?
>
> Thorsten
>
> At Sa, 1.07.2006, 13:53, wrote Rachid Abdoun:
>> Yes i build myself
>>
>> I use this config http://download.openvz.org/kernel/devel/
>> 026test014.4/configs/kernel-2.6.16-026test014-i686.config.ov z to
>> build it....
>>
>> What can I do?
>>
>> Thank you
>>
>> Le 1 juil. 06 à 10:09, Thorsten Schifferdecker a écrit :
>>
>>> Hi,
>>>
>>> have you build your own kernel and enabled the modules needed
>>> for openvz ?
>>>
>>> Thorsten
>>>
>>> At Sa, 1.07.2006, 02:15, wrote Rachid Abdoun:
>>>> Yes I did :
>>>>
>>>> phoenix:~# /etc/init.d/vz start
>>>> Starting OpenVZ: ..done
>>>> phoenix:~# vzlist
>>>> Unable to open /proc/vz/veinfo
>>>> VPS not found
>>>>
>>>> I'm running debian sarge 3.1 what can I do?
>>>>
>>>> Le 29 juin 06 à 17:40, Kir Kolyshkin a écrit :
>>>>
>>>>> Looks like OpenVZ kernel modules are not loaded.
>>>>>
>>>>> Have you started vz subsystem? I mean running
>>>>> /etc/init.d/vz start
>>>>>
>>>>> Rachid Abdoun wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I'm running a debian sarge 3.1 with kernel 2.6.16 with this
>>>>>> patch http://download.openvz.org/kernel/devel/026test014.4/
>>>>>> patches/
>>>>>> patch-026test014-combined.gz
>>>>>> and i installed the latest tools :
>>>>>>
>>>>>> phoenix:~# vzctl --version
>>>>>> vzctl version 3.0.10
>>>>>>
>>>>>> phoenix:~# vzquota --version
>>>>>> Vzquota version 2.5.0
>>>>>>
>>>>>> when i list the virual personal servers i have this *errorS* :
>>>>>>
>>>>>> *phoenix:~# vzlist *
>>>>>> *Unable to open /proc/vz/veinfo*
>>>>>> *VPS not fouun*
>>>>>>
>>>>>> and when I stop a server I have this :
>>>>>>
>>>>>> *phoenix:~# vzctl stop 101*
>>>>>> *Unable to open /proc/vz/veinfo: No such file or directory*
>>>>>> *Stopping VPS ...*
>>>>>>
>>>>>> what's happen? Could someone help me?
>>>>>>
>>>>>> Thank you
>>>
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4259 is a reply to message #4253] |
Tue, 04 July 2006 11:22 |
|
|
It looks like vznetdev module is not loaded. Try loading it manually:
/sbin/modprobe vznetdev
Rachid Abdoun wrote:
> Hi,
>
> More responses: :-)
>
> Boot your system the right kernel -> have you modified your bootloader
> e.g. grub or lilo ?
>
> I use grub check my menu.lst :
>
> title OpenVZ , kernel 2.6.16-026test014
> root (hd0,0)
> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro
> savedefault
> boot
>
> title OpenVZ , kernel 2.6.16-026test014 (recovery mode)
> root (hd0,0)
> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro single
> savedefault
> boot
>
> title Debian GNU/Linux, kernel 2.6.8-2-386
> root (hd0,0)
> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro
> initrd /initrd.img-2.6.8-2-386
> savedefault
> boot
>
> title Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode)
> root (hd0,0)
> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro single
> initrd /initrd.img-2.6.8-2-386
> savedefault
> boot
>
> Which version show "uname -r" ?
>
> phoenix:~# uname -r
> 2.6.16-026test014
>
> Are the modules "vzmon vzdquota vzdev" loaded ?
>
> phoenix:~# lsmod | grep vzmon
> vzmon 45984 2 vzrst,vzcpt
> vzdev 2468 2 vzdquota,vzmon
>
> phoenix:~# lsmod | grep vzquota
> => Nothing!
>
> Are the modules on the right place :
> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
>
> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzmon.ko:
> Permission non accord?e
>
> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
>
> bash: /lib/modules/2.6.16-026test014/kernel/fs/vzdquota.ko: Permission
> non accord?e
>
> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>
> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzdev.ko:
> Permission non accord?e
>
> I still have a problem :
>
> phoenix:~# vzctl start 101
> Starting VPS ...
> VPS is mounted
> Adding IP address(es): 192.168.2.1
> Unable to add IP 192.168.2.1: Inappropriate ioctl for device
> Unable to del IP 192.168.2.1: Inappropriate ioctl for device
> VPS start failed
> Stopping VPS ...
> VPS was stopped
> vzquota : (error) Quota off syscall for id 101: Device or resource busy
> vzquota off failed [3]
>
> Conf file of 101 :
>
> phoenix:~# cat /etc/vz/conf/101.conf
> # Copyright (C) 2000-2006 SWsoft. All rights reserved.
> #
> # This program is free software; you can redistribute it and/or modify
> # it under the terms of the GNU General Public License as published by
> # the Free Software Foundation; either version 2 of the License, or
> # (at your option) any later version.
> #
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY; without even the implied warranty of
> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> # GNU General Public License for more details.
> #
> # You should have received a copy of the GNU General Public License
> # along with this program; if not, write to the Free Software
> # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> #
>
> ONBOOT="no"
>
> # UBC parameters (in form of barrier:limit)
> # Primary parameters
> AVNUMPROC="40:40"
> NUMPROC="65:65"
> NUMTCPSOCK="80:80"
> NUMOTHERSOCK="80:80"
> VMGUARPAGES="6144:2147483647"
> # Secondary parameters
> KMEMSIZE="2752512:2936012"
> TCPSNDBUF="319488:524288"
> TCPRCVBUF="319488:524288"
> OTHERSOCKBUF="132096:336896"
> DGRAMRCVBUF="132096:132096"
> OOMGUARPAGES="6144:2147483647"
> # Auxiliary parameters
> LOCKEDPAGES="32:32"
> SHMPAGES="8192:8192"
> PRIVVMPAGES="49152:53575"
> NUMFILE="2048:2048"
> NUMFLOCK="100:110"
> NUMPTY="16:16"
> NUMSIGINFO="256:256"
> DCACHESIZE="1048576:1097728"
>
> PHYSPAGES="0:2147483647"
> NUMIPTENT="128:128"
>
> # Disk quota parameters (in form of softlimit:hardlimit)
> DISKSPACE="1048576:1153434"
> DISKINODES="200000:220000"
> QUOTATIME="0"
>
> # CPU fair sheduler parameter
> CPUUNITS="1000"
> VE_ROOT="/var/lib/vz/root/$VEID"
> VE_PRIVATE="/var/lib/vz/private/$VEID"
> OSTEMPLATE="debian-3.1-i386-minimal"
> ORIGIN_SAMPLE="vps.basic"
> HOSTNAME="vps101"
> NAMESERVER="192.168.1.1"
> VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
> IP_ADDRESS="192.168.2.1"
> phoenix:~#
>
> Can load manually the module above, and listed by lsmod ?
>
> Yes but that don't resolve the problem...
>
> Whay can I do? Thanks!!!
>
> Rachid
>
>
>
> Le 1 juil. 06 à 16:42, Thorsten Schifferdecker a écrit :
>
>> Hi,
>>
>> More questions: :-)
>>
>> Boot your system the right kernel -> have you modified your bootloader
>> e.g. grub or lilo ?
>>
>> Which version show "uname -r" ?
>>
>> Are the modules "vzmon vzdquota vzdev" loaded ?
>>
>> Are the modules on the right place :
>> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
>> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
>> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>>
>> Can load manually the module above, and listed by lsmod ?
>>
>> Thorsten
>>
>> At Sa, 1.07.2006, 13:53, wrote Rachid Abdoun:
>>> Yes i build myself
>>>
>>> I use this config http://download.openvz.org/kernel/devel/
>>> 026test014.4/configs/kernel-2.6.16-026test014-i686.config.ov z to
>>> build it....
>>>
>>> What can I do?
>>>
>>> Thank you
>>>
>>> Le 1 juil. 06 à 10:09, Thorsten Schifferdecker a écrit :
>>>
>>>> Hi,
>>>>
>>>> have you build your own kernel and enabled the modules needed
>>>> for openvz ?
>>>>
>>>> Thorsten
>>>>
>>>> At Sa, 1.07.2006, 02:15, wrote Rachid Abdoun:
>>>>> Yes I did :
>>>>>
>>>>> phoenix:~# /etc/init.d/vz start
>>>>> Starting OpenVZ: ..done
>>>>> phoenix:~# vzlist
>>>>> Unable to open /proc/vz/veinfo
>>>>> VPS not found
>>>>>
>>>>> I'm running debian sarge 3.1 what can I do?
>>>>>
>>>>> Le 29 juin 06 à 17:40, Kir Kolyshkin a écrit :
>>>>>
>>>>>> Looks like OpenVZ kernel modules are not loaded.
>>>>>>
>>>>>> Have you started vz subsystem? I mean running
>>>>>> /etc/init.d/vz start
>>>>>>
>>>>>> Rachid Abdoun wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> I'm running a debian sarge 3.1 with kernel 2.6.16 with this
>>>>>>> patch http://download.openvz.org/kernel/devel/026test014.4/patches /
>>>>>>> patch-026test014-combined.gz
>>>>>>> and i installed the latest tools :
>>>>>>>
>>>>>>> phoenix:~# vzctl --version
>>>>>>> vzctl version 3.0.10
>>>>>>>
>>>>>>> phoenix:~# vzquota --version
>>>>>>> Vzquota version 2.5.0
>>>>>>>
>>>>>>> when i list the virual personal servers i have this *errorS* :
>>>>>>>
>>>>>>> *phoenix:~# vzlist *
>>>>>>> *Unable to open /proc/vz/veinfo*
>>>>>>> *VPS not fouun*
>>>>>>>
>>>>>>> and when I stop a server I have this :
>>>>>>>
>>>>>>> *phoenix:~# vzctl stop 101*
>>>>>>> *Unable to open /proc/vz/veinfo: No such file or directory*
>>>>>>> *Stopping VPS ...*
>>>>>>>
>>>>>>> what's happen? Could someone help me?
>>>>>>>
>>>>>>> Thank you
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users@openvz.org <mailto:Users@openvz.org>
>>>> https://openvz.org/mailman/listinfo/users
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users@openvz.org <mailto:Users@openvz.org>
>>> https://openvz.org/mailman/listinfo/users
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users@openvz.org <mailto:Users@openvz.org>
>> https://openvz.org/mailman/listinfo/users
>
> ------------------------------------------------------------ ------------
>
...
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4324 is a reply to message #4259] |
Wed, 05 July 2006 18:03 |
Rachid Abdoun
Messages: 12
Registered: June 2006
|
Junior Member |
|
|
I don't think :
phoenix:~# lsmod | grep vz
vzrst 122992 0
ip_nat 14644 1 vzrst
vzcpt 99392 0
ip_conntrack 49448 3 vzrst,ip_nat,vzcpt
vzdquota 39028 0 [permanent]
vzmon 45984 2 vzrst,vzcpt
vzdev 2468 2 vzdquota,vzmon
phoenix:~# modprobe vznetdev
phoenix:~# lsmod | grep vz
vznetdev 13856 0
vzrst 122992 0
ip_nat 14644 1 vzrst
vzcpt 99392 0
ip_conntrack 49448 3 vzrst,ip_nat,vzcpt
vzdquota 39028 0 [permanent]
vzmon 45984 3 vznetdev,vzrst,vzcpt
vzdev 2468 3 vznetdev,vzdquota,vzmon
phoenix:~# vzctl start 101
Starting VPS ...
VPS is mounted
Setting CPU units: 1000
Set hostname: vps101
File resolv.conf was modified
Processing veth devices
Warning: veth feature is not supported by kernel, skipped veth configure
VPS start in progress...
101.conf :
# Copyright (C) 2000-2006 SWsoft. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
#
ONBOOT="no"
# UBC parameters (in form of barrier:limit)
# Primary parameters
AVNUMPROC="40:40"
NUMPROC="65:65"
NUMTCPSOCK="80:80"
NUMOTHERSOCK="80:80"
VMGUARPAGES="6144:2147483647"
# Secondary parameters
KMEMSIZE="2752512:2936012"
TCPSNDBUF="319488:524288"
TCPRCVBUF="319488:524288"
OTHERSOCKBUF="132096:336896"
DGRAMRCVBUF="132096:132096"
OOMGUARPAGES="6144:2147483647"
# Auxiliary parameters
LOCKEDPAGES="32:32"
SHMPAGES="8192:8192"
PRIVVMPAGES="49152:53575"
NUMFILE="2048:2048"
NUMFLOCK="100:110"
NUMPTY="16:16"
NUMSIGINFO="256:256"
DCACHESIZE="1048576:1097728"
PHYSPAGES="0:2147483647"
NUMIPTENT="128:128"
# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="1048576:1153434"
DISKINODES="200000:220000"
QUOTATIME="0"
# CPU fair sheduler parameter
CPUUNITS="1000"
VE_ROOT="/var/lib/vz/root/$VEID"
VE_PRIVATE="/var/lib/vz/private/$VEID"
OSTEMPLATE="debian-3.1-i386-minimal"
ORIGIN_SAMPLE="vps.basic"
HOSTNAME="vps101"
NAMESERVER="192.168.1.1"
VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
Have another idea?!
Le 4 juil. 06 à 13:22, Kir Kolyshkin a écrit :
> It looks like vznetdev module is not loaded. Try loading it manually:
>
> /sbin/modprobe vznetdev
>
> Rachid Abdoun wrote:
>> Hi,
>>
>> More responses: :-)
>>
>> Boot your system the right kernel -> have you modified your
>> bootloader
>> e.g. grub or lilo ?
>>
>> I use grub check my menu.lst :
>>
>> title OpenVZ , kernel 2.6.16-026test014
>> root (hd0,0)
>> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro
>> savedefault
>> boot
>>
>> title OpenVZ , kernel 2.6.16-026test014 (recovery mode)
>> root (hd0,0)
>> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro single
>> savedefault
>> boot
>>
>> title Debian GNU/Linux, kernel 2.6.8-2-386
>> root (hd0,0)
>> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro
>> initrd /initrd.img-2.6.8-2-386
>> savedefault
>> boot
>>
>> title Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode)
>> root (hd0,0)
>> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro single
>> initrd /initrd.img-2.6.8-2-386
>> savedefault
>> boot
>>
>> Which version show "uname -r" ?
>>
>> phoenix:~# uname -r
>> 2.6.16-026test014
>>
>> Are the modules "vzmon vzdquota vzdev" loaded ?
>>
>> phoenix:~# lsmod | grep vzmon
>> vzmon 45984 2 vzrst,vzcpt
>> vzdev 2468 2 vzdquota,vzmon
>>
>> phoenix:~# lsmod | grep vzquota
>> => Nothing!
>>
>> Are the modules on the right place :
>> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
>>
>> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzmon.ko:
>> Permission non accord?e
>>
>> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
>>
>> bash: /lib/modules/2.6.16-026test014/kernel/fs/vzdquota.ko:
>> Permission non accord?e
>>
>> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>>
>> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzdev.ko:
>> Permission non accord?e
>>
>> I still have a problem :
>>
>> phoenix:~# vzctl start 101
>> Starting VPS ...
>> VPS is mounted
>> Adding IP address(es): 192.168.2.1
>> Unable to add IP 192.168.2.1: Inappropriate ioctl for device
>> Unable to del IP 192.168.2.1: Inappropriate ioctl for device
>> VPS start failed
>> Stopping VPS ...
>> VPS was stopped
>> vzquota : (error) Quota off syscall for id 101: Device or resource
>> busy
>> vzquota off failed [3]
>>
>> Conf file of 101 :
>>
>> phoenix:~# cat /etc/vz/conf/101.conf
>> # Copyright (C) 2000-2006 SWsoft. All rights reserved.
>> #
>> # This program is free software; you can redistribute it and/or
>> modify
>> # it under the terms of the GNU General Public License as
>> published by
>> # the Free Software Foundation; either version 2 of the License, or
>> # (at your option) any later version.
>> #
>> # This program is distributed in the hope that it will be useful,
>> # but WITHOUT ANY WARRANTY; without even the implied warranty of
>> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> # GNU General Public License for more details.
>> #
>> # You should have received a copy of the GNU General Public License
>> # along with this program; if not, write to the Free Software
>> # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>> 02111-1307 USA
>> #
>>
>> ONBOOT="no"
>>
>> # UBC parameters (in form of barrier:limit)
>> # Primary parameters
>> AVNUMPROC="40:40"
>> NUMPROC="65:65"
>> NUMTCPSOCK="80:80"
>> NUMOTHERSOCK="80:80"
>> VMGUARPAGES="6144:2147483647"
>> # Secondary parameters
>> KMEMSIZE="2752512:2936012"
>> TCPSNDBUF="319488:524288"
>> TCPRCVBUF="319488:524288"
>> OTHERSOCKBUF="132096:336896"
>> DGRAMRCVBUF="132096:132096"
>> OOMGUARPAGES="6144:2147483647"
>> # Auxiliary parameters
>> LOCKEDPAGES="32:32"
>> SHMPAGES="8192:8192"
>> PRIVVMPAGES="49152:53575"
>> NUMFILE="2048:2048"
>> NUMFLOCK="100:110"
>> NUMPTY="16:16"
>> NUMSIGINFO="256:256"
>> DCACHESIZE="1048576:1097728"
>>
>> PHYSPAGES="0:2147483647"
>> NUMIPTENT="128:128"
>>
>> # Disk quota parameters (in form of softlimit:hardlimit)
>> DISKSPACE="1048576:1153434"
>> DISKINODES="200000:220000"
>> QUOTATIME="0"
>>
>> # CPU fair sheduler parameter
>> CPUUNITS="1000"
>> VE_ROOT="/var/lib/vz/root/$VEID"
>> VE_PRIVATE="/var/lib/vz/private/$VEID"
>> OSTEMPLATE="debian-3.1-i386-minimal"
>> ORIGIN_SAMPLE="vps.basic"
>> HOSTNAME="vps101"
>> NAMESERVER="192.168.1.1"
>> VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
>> IP_ADDRESS="192.168.2.1"
>> phoenix:~#
>>
>> Can load manually the module above, and listed by lsmod ?
>>
>> Yes but that don't resolve the problem...
>>
>> Whay can I do? Thanks!!!
>>
>> Rachid
>>
>>
>>
>> Le 1 juil. 06 à 16:42, Thorsten Schifferdecker a écrit :
>>
>>> Hi,
>>>
>>> More questions: :-)
>>>
>>> Boot your system the right kernel -> have you modified your
>>> bootloader
>>> e.g. grub or lilo ?
>>>
>>> Which version show "uname -r" ?
>>>
>>> Are the modules "vzmon vzdquota vzdev" loaded ?
>>>
>>> Are the modules on the right place :
>>> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
>>> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
>>> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>>>
>>> Can load manually the module above, and listed by lsmod ?
>>>
>>> Thorsten
>>>
>>> At Sa, 1.07.2006, 13:53, wrote Rachid Abdoun:
>>>> Yes i build myself
>>>>
>>>> I use this config http://download.openvz.org/kernel/devel/
>>>> 026test014.4/configs/kernel-2.6.16-026test014-i686.config.ov z to
>>>> build it....
>>>>
>>>> What can I do?
>>>>
>>>> Thank you
>>>>
>>>> Le 1 juil. 06 à 10:09, Thorsten Schifferdecker a écrit :
>>>>
>>>>> Hi,
>>>>>
>>>>> have you build your own kernel and enabled the modules needed
>>>>> for openvz ?
>>>>>
>>>>> Thorsten
>>>>>
>>>>> At Sa, 1.07.2006, 02:15, wrote Rachid Abdoun:
>>>>>> Yes I did :
>>>>>>
>>>>>> phoenix:~# /etc/init.d/vz start
>>>>>> Starting OpenVZ: ..done
>>>>>> phoenix:~# vzlist
>>>>>> Unable to open /proc/vz/veinfo
>>>>>> VPS not found
>>>>>>
>>>>>> I'm running debian sarge 3.1 what can I do?
>>>>>>
>>>>>> Le 29 juin 06 à 17:40, Kir Kolyshkin a écrit :
>>>>>>
>>>>>>> Looks like OpenVZ kernel modules are not loaded.
>>>>>>>
>>>>>>> Have you started vz subsystem? I mean running
>>>>>>> /etc/init.d/vz start
>>>>>>>
>>>>>>> Rachid Abdoun wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm running a debian sarge 3.1 with kernel 2.6.16 with this
>>>>>>>> patch http://download.openvz.org/kernel/devel/026test014.4/
>>>>>>>> patches/
>>>>>>>> patch-026test014-combined.gz
>>>>>>>> and i installed the latest tools :
>>>>>>>>
>>>>>>>> phoenix:~# vzctl --version
>>>>>>>> vzctl version 3.0.10
>>>>>>>>
>>>>>>>> phoenix:~# vzquota --version
>>>>>>>> Vzquota version 2.5.0
>>>>>>>>
>>>>>>>> when i list the virual personal servers i have this *errorS* :
>>>>>>>>
>>>>>>>> *phoenix:~# vzlist *
>>>>>>>> *Unable to open /proc/vz/veinfo*
>>>>>>>> *VPS not fouun*
>>>>>>>>
>>>>>>>> and when I stop a server I have this :
>>>>>>>>
>>>>>>>> *phoenix:~# vzctl stop 101*
>>>>>>>> *Unable to open /proc/vz/veinfo: No such file or directory*
>>>>>>>> *Stopping VPS ...*
>>>>>>>>
>>>>>>>> what's happen? Could someone help me?
>>>>>>>>
>>>>>>>> Thank you
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users@openvz.org <mailto:Users@openvz.org>
>>>>> https://openvz.org/mailman/listinfo/users
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users@openvz.org <mailto:Users@openvz.org>
>>>> https://openvz.org/mailman/listinfo/users
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users@openvz.org <mailto:Users@openvz.org>
>>> https://openvz.org/mailman/listinfo/users
>>
>> ------------------------------------------------------------ ---------
>> ---
>>
|
|
|
|
| Re: Problem with /proc/vz/veinfo [message #4338 is a reply to message #4324] |
Thu, 06 July 2006 09:43 |
|
|
So, this time when the module is loaded there is no more "Unable to add
IP 192.168.2.1: Inappropriate ioctl for device" error. So make sure this
module is loaded.
This time there is no error, but a warning: "veth feature is not
supported by kernel, skipped veth configure". If you really need veth
functionality, check that vzethdev module is loaded:
lsmod | grep vzeth
If it is not loaded, load it.
PS You might want to check /etc/init.d/vz and make sure vznetdev (and
vzethdev -- if you need it) are in.
Rachid Abdoun wrote:
> I don't think :
>
> phoenix:~# lsmod | grep vz
> vzrst 122992 0
> ip_nat 14644 1 vzrst
> vzcpt 99392 0
> ip_conntrack 49448 3 vzrst,ip_nat,vzcpt
> vzdquota 39028 0 [permanent]
> vzmon 45984 2 vzrst,vzcpt
> vzdev 2468 2 vzdquota,vzmon
>
> phoenix:~# modprobe vznetdev
>
> phoenix:~# lsmod | grep vz
> vznetdev 13856 0
> vzrst 122992 0
> ip_nat 14644 1 vzrst
> vzcpt 99392 0
> ip_conntrack 49448 3 vzrst,ip_nat,vzcpt
> vzdquota 39028 0 [permanent]
> vzmon 45984 3 vznetdev,vzrst,vzcpt
> vzdev 2468 3 vznetdev,vzdquota,vzmon
>
> phoenix:~# vzctl start 101
> Starting VPS ...
> VPS is mounted
> Setting CPU units: 1000
> Set hostname: vps101
> File resolv.conf was modified
> Processing veth devices
> Warning: veth feature is not supported by kernel, skipped veth configure
> VPS start in progress...
>
> 101.conf :
>
> # Copyright (C) 2000-2006 SWsoft. All rights reserved.
> #
> # This program is free software; you can redistribute it and/or modify
> # it under the terms of the GNU General Public License as published by
> # the Free Software Foundation; either version 2 of the License, or
> # (at your option) any later version.
> #
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY; without even the implied warranty of
> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> # GNU General Public License for more details.
> #
> # You should have received a copy of the GNU General Public License
> # along with this program; if not, write to the Free Software
> # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> #
>
> ONBOOT="no"
>
> # UBC parameters (in form of barrier:limit)
> # Primary parameters
> AVNUMPROC="40:40"
> NUMPROC="65:65"
> NUMTCPSOCK="80:80"
> NUMOTHERSOCK="80:80"
> VMGUARPAGES="6144:2147483647"
> # Secondary parameters
> KMEMSIZE="2752512:2936012"
> TCPSNDBUF="319488:524288"
> TCPRCVBUF="319488:524288"
> OTHERSOCKBUF="132096:336896"
> DGRAMRCVBUF="132096:132096"
> OOMGUARPAGES="6144:2147483647"
> # Auxiliary parameters
> LOCKEDPAGES="32:32"
> SHMPAGES="8192:8192"
> PRIVVMPAGES="49152:53575"
> NUMFILE="2048:2048"
> NUMFLOCK="100:110"
> NUMPTY="16:16"
> NUMSIGINFO="256:256"
> DCACHESIZE="1048576:1097728"
>
> PHYSPAGES="0:2147483647"
> NUMIPTENT="128:128"
>
> # Disk quota parameters (in form of softlimit:hardlimit)
> DISKSPACE="1048576:1153434"
> DISKINODES="200000:220000"
> QUOTATIME="0"
>
> # CPU fair sheduler parameter
> CPUUNITS="1000"
> VE_ROOT="/var/lib/vz/root/$VEID"
> VE_PRIVATE="/var/lib/vz/private/$VEID"
> OSTEMPLATE="debian-3.1-i386-minimal"
> ORIGIN_SAMPLE="vps.basic"
> HOSTNAME="vps101"
> NAMESERVER="192.168.1.1"
> VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
>
> Have another idea?!
>
>
> Le 4 juil. 06 à 13:22, Kir Kolyshkin a écrit :
>
>> It looks like vznetdev module is not loaded. Try loading it manually:
>>
>> /sbin/modprobe vznetdev
>>
>> Rachid Abdoun wrote:
>>> Hi,
>>>
>>> More responses: :-)
>>>
>>> Boot your system the right kernel -> have you modified your bootloader
>>> e.g. grub or lilo ?
>>>
>>> I use grub check my menu.lst :
>>>
>>> title OpenVZ , kernel 2.6.16-026test014
>>> root (hd0,0)
>>> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro
>>> savedefault
>>> boot
>>>
>>> title OpenVZ , kernel 2.6.16-026test014 (recovery mode)
>>> root (hd0,0)
>>> kernel /vmlinuz-2.6.16-026test014 root=/dev/hda7 ro single
>>> savedefault
>>> boot
>>>
>>> title Debian GNU/Linux, kernel 2.6.8-2-386
>>> root (hd0,0)
>>> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro
>>> initrd /initrd.img-2.6.8-2-386
>>> savedefault
>>> boot
>>>
>>> title Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode)
>>> root (hd0,0)
>>> kernel /vmlinuz-2.6.8-2-386 root=/dev/hda7 ro single
>>> initrd /initrd.img-2.6.8-2-386
>>> savedefault
>>> boot
>>>
>>> Which version show "uname -r" ?
>>>
>>> phoenix:~# uname -r
>>> 2.6.16-026test014
>>>
>>> Are the modules "vzmon vzdquota vzdev" loaded ?
>>>
>>> phoenix:~# lsmod | grep vzmon
>>> vzmon 45984 2 vzrst,vzcpt
>>> vzdev 2468 2 vzdquota,vzmon
>>>
>>> phoenix:~# lsmod | grep vzquota
>>> => Nothing!
>>>
>>> Are the modules on the right place :
>>> /lib/modules/`uname -r`/kernel/kernel/vzmon.ko
>>>
>>> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzmon.ko:
>>> Permission non accord?e
>>>
>>> /lib/modules/`uname -r`/kernel/fs/vzdquota.ko
>>>
>>> bash: /lib/modules/2.6.16-026test014/kernel/fs/vzdquota.ko:
>>> Permission non accord?e
>>>
>>> /lib/modules/`uname -r`/kernel/kernel/vzdev.ko
>>>
>>> bash: /lib/modules/2.6.16-026test014/kernel/kernel/vzdev.ko:
>>> Permission non accord?e
>>>
>>> I still have a problem :
>>>
>>> phoenix:~# vzctl start 101
>>> Starting VPS ...
>>> VPS is mounted
>>> Adding IP address(es): 192.168.2.1
>>> Unable to add IP 192.168.2.1: Inappropriate ioctl for device
>>> Unable to del IP 192.168.2.1: Inappropriate ioctl for device
>>> VPS start failed
>>> Stopping VPS ...
>>> VPS was stopped
>>> vzquota : (error) Quota off syscall for id 101: Device or resource busy
>>> vzquota off failed [3]
>>>
>>> Conf file of 101 :
>>>
>>> phoenix:~# cat /etc/vz/conf/101.conf
>>> # Copyright (C) 2000-2006 SWsoft. All rights reserved.
>>> #
>>> # This program is free software; you can redistribute it and/or modify
>>> # it under the terms of the GNU General Public License as published by
>>> # the Free Software Foundation; either version 2 of the License, or
>>> # (at your option) any later version.
>>> #
>>> # This program is distributed in the hope that it will be useful,
>>> # but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> # GNU General Public License for more details.
>>> #
>>> # You should have received a copy of the GNU General Public License
>>> # along with this program; if not, write to the Free Software
>>> # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>> 02111-1307 USA
>>> #
>>>
>>> ONBOOT="no"
>>>
>>> # UBC parameters (in form of barrier:limit)
>>> # Primary parameters
>>> AVNUMPROC="40:40"
>>> NUMPROC="65:65"
>>> NUMTCPSOCK="80:80"
>>> NUMOTHERSOCK="80:80"
>>> VMGUARPAGES="6144:2147483647"
>>> # Secondary parameters
>>> KMEMSIZE="2752512:2936012"
>>> TCPSNDBUF="319488:524288"
>>> TCPRCVBUF="319488:524288"
>>> OTHERSOCKBUF="132096:336896"
>>> DGRAMRCVBUF="132096:132096"
>>> OOMGUARPAGES="6144:2147483647"
>>> # Auxiliary parameters
>>> LOCKEDPAGES="32:32"
>>> SHMPAGES="8192:8192"
>>> PRIVVMPAGES="49152:53575"
>>> NUMFILE="2048:2048"
>>> NUMFLOCK="100:110"
>>> NUMPTY="16:16"
>>> NUMSIGINFO="256:256"
>>> DCACHESIZE="1048576:1097728"
>>>
>>> PHYSPAGES="0:2147483647"
>>> NUMIPTENT="128:128"
>>>
>>> # Disk quota parameters (in form of softlimit:hardlimit)
>>> DISKSPACE="1048576:1153434"
>>> DISKINODES="200000:220000"
>>> QUOTATIME="0"
>>>
>>> # CPU fair sheduler parameter
>>> CPUUNITS="1000"
>>> VE_ROOT="/var/lib/vz/root/$VEID"
>>> VE_PRIVATE="/var/lib/vz/private/$VEID"
>>> OSTEMPLATE="debian-3.1-i386-minimal"
>>> ORIGIN_SAMPLE="vps.basic"
>>> HOSTNAME="vps101"
>>> NAMESERVER="192.168.1.1"
>>> VETH="vif1.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B "
>>> IP
...
|
|
|
|
Goto Forum:
Current Time: Fri Nov 01 06:55:28 GMT 2024
Total time taken to generate the page: 0.03563 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
