| Network settings - differnet address range for containers [message #42161] |
Fri, 11 March 2011 19:17  |
naro
Messages: 4
Registered: March 2011
|
Junior Member |
|
|
Hello,
I'm trying to set up public IP for my container. HN has address XXX.71.138.11 (eth0). Container should get address from range:
YYY.132.159.194 - 222 (gateway is set up by ISP to YYY.132.159.193 and is sending packets to my HW node).
I tried to set YYY.132.159.200 to HN as eth0:0 and it works fine, it means, ISP routing is fine.
There are no iptables rules.
I've assigned YYY.132.159.194 to container and now I need to set up routing on hardware node. I checked Source based routing wiki, added the rule, but
/sbin/ip route add default dev eth0 via YYY.132.159.193 table 10
failed with RTNETLINK: No such file or directory. This is caused by missing YYY.132.159.193 route in the main table probably, but I don't know how to set it up.
HN# ip route list
YYY.132.159.194 dev venet0 scope link
XXX.71.138.0/27 dev eth0 proto kernel scope link src XXX.71.138.11
default via XXX.71.138.1 dev eth0
HN has assigned XXX.71.138.11 on eth0 only. No other public address.
How should I setup routing on HN to correctly pass packets from YYY.132.159.194-222 to YYY.132.159.193 via eth0 ?
Thanks
Edit:
forgot to mention sysctl settings:
net.ipv4.ip_forward = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
I have tried to assign 192.168.200.101 to container and configured iptables postrouting on HN and it works fine, but I'm still not able to get public address work.
[Updated on: Sat, 12 March 2011 17:27] Report message to a moderator |
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
