NAT within 2 containers [message #41277] |
Tue, 21 December 2010 02:01 |
timmy
Messages: 4 Registered: December 2010
|
Junior Member |
|
|
Hi,
I have a container (call it ct1) with 2 veth network ports (which are bridged to 2 network ports on the host). One WAN (eth0) and one LAN (eth1).
I want to have another container (call it ct2) to have a single veth (eth1 - LAN) and for it to route/nat via ct1.
I have tried setting the default gateway on ct2 to ct1's LAN IP. note they can ping each other. I have tried lots of ways to try to get ct1 to masquerade the traffic but it just wont work!
What am I doing wrong? is this possible??
To masquerade I have tried... (note all defaults set to accept)
iptables -t nat -A POSTROUTING -s 10.0.1.0/24 -o eth0 -j SNAT --to 123.x.x.61
where 123.x.x.61 is the WAN ip on ct1
I also tried
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
Thanks
|
|
|
|
|
|