OpenVZ Forum: Support » Adding a virtual ethernet device and join to a bridge

Home » General » Support » Adding a virtual ethernet device and join to a bridge (vzctl --netif_add doesn't add the device in the container)

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Adding a virtual ethernet device and join to a bridge [message #41012]

Thu, 04 November 2010 09:20

narcisgarcia
Messages: 41
Registered: May 2009

Member

I create the veth1.0 device in the Hardware Node, but no eth0 is seen int the ConTainer.
Networking scenario: br0 is a bridge in HN with eth0 and eth1 included. eth0 is the only physical ethernet plugged.

Previus ifconfig in HN:

br0       Link encap:Ethernet  HWaddr 00:0c:6e:1e:c6:98  
          inet addr:192.168.1.73  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:6eff:fe1e:c698/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22834 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3731 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1284434 (1.2 MB)  TX bytes:710004 (710.0 KB)

eth0      Link encap:Ethernet  HWaddr 00:0c:6e:1e:c6:98  
          inet6 addr: fe80::20c:6eff:fe1e:c698/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:22908 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3731 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1612895 (1.6 MB)  TX bytes:710004 (710.0 KB)
          Interrupt:23 Base address:0x2000 

eth1      Link encap:Ethernet  HWaddr 00:17:9a:38:89:7f  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 Base address:0xe000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Previus ifconfig in CT:

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:300 (300.0 B)  TX bytes:300 (300.0 B)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.168.1.1  P-t-P:192.168.1.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

The change:

vzctl set 1001 --netif_add eth0,,veth1.0,,br0 --save

Next ifconfig in HN (seems to be right):

br0       Link encap:Ethernet  HWaddr 00:0c:6e:1e:c6:98  
          inet addr:192.168.1.73  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:6eff:fe1e:c698/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:23764 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3796 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1332414 (1.3 MB)  TX bytes:721926 (721.9 KB)

eth0      Link encap:Ethernet  HWaddr 00:0c:6e:1e:c6:98  
          inet6 addr: fe80::20c:6eff:fe1e:c698/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:23838 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3796 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1674115 (1.6 MB)  TX bytes:721926 (721.9 KB)
          Interrupt:23 Base address:0x2000 

eth1      Link encap:Ethernet  HWaddr 00:17:9a:38:89:7f  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 Base address:0xe000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

veth1.0   Link encap:Ethernet  HWaddr 00:18:51:1e:50:1a  
          inet6 addr: fe80::218:51ff:fe1e:501a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:3 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Next ifconfig in CT (lack of "eth0" device):

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:300 (300.0 B)  TX bytes:300 (300.0 B)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.168.1.1  P-t-P:192.168.1.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

Tried to restart the container (vzctl stop 1001 ; vzctl start 1001), but the result is the same when entering to container (vzctl enter 1001)

Software:
- Hardware Node with Ubuntu 10.04, recompiled kernel 2.6.32 with dzhanibekov.1 patch
- ConTainer (VEID=1) created with Ubuntu 10.04 precreated template
- vzctl version 3.0.23

(The final target is to set-up a DHCP server into a container)

Attachment: hn_ip-route.txt
(Size: 0.26KB, Downloaded 257 times)
Attachment: hn_ip-rule.txt
(Size: 0.08KB, Downloaded 237 times)
Attachment: hn_netfilter.txt
(Size: 1.00KB, Downloaded 268 times)
Attachment: hn_iptables-f.txt
(Size: 0.00KB, Downloaded 226 times)

Narcis Garcia

[Updated on: Fri, 05 November 2010 13:45]

Report message to a moderator

Re: Adding a virtual ethernet device and join to a bridge [message #41018 is a reply to message #41012]

Thu, 04 November 2010 14:16

narcisgarcia
Messages: 41
Registered: May 2009

Member

I also attach the VE results for the "How to report networking-related problems"

Attachment: ct_ip-route.txt
(Size: 0.07KB, Downloaded 254 times)
Attachment: ct_ip-rule.txt
(Size: 0.08KB, Downloaded 240 times)
Attachment: ct_iptables-f.txt
(Size: 0.00KB, Downloaded 217 times)
Attachment: ct_netfilter.txt
(Size: 0.15KB, Downloaded 254 times)

Narcis Garcia

Report message to a moderator

Re: Adding a virtual ethernet device and join to a bridge [message #41030 is a reply to message #41018]

Fri, 05 November 2010 07:09

curx
Messages: 739
Registered: February 2006
Location: Nürnberg, Germany

Senior Member

Hi,

Have setup your Network settings,
plz post

(CT1)% ifconfig -a

Bye,
Thorsten

Report message to a moderator

Re: Adding a virtual ethernet device and join to a bridge [message #41034 is a reply to message #41030]

Fri, 05 November 2010 13:43

narcisgarcia
Messages: 41
Registered: May 2009

Member

Ok, I see it was down in container (ifconfig -a):

eth0      Link encap:Ethernet  HWaddr 00:18:51:9b:10:7a  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:34 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3167 (3.1 KB)  TX bytes:3167 (3.1 KB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:4536 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3346 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:619291 (619.2 KB)  TX bytes:625730 (625.7 KB)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.168.1.1  P-t-P:192.168.1.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

Now I've removed previous IP configuration with this in hardware node:

vzctl set control --ipdel all --save

And replaced whole content of container's /etc/network/interfaces by:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
        address 192.168.1.1
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        gateway 192.168.1.252

And after this I obtain this with ifconfig -a :

eth0      Link encap:Ethernet  HWaddr 00:18:51:9b:10:7a  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::218:51ff:fe9b:107a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:308 (308.0 B)  TX bytes:1980 (1.9 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:59 errors:0 dropped:0 overruns:0 frame:0
          TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5374 (5.3 KB)  TX bytes:5374 (5.3 KB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          BROADCAST POINTOPOINT NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

But there is no communication from container:

ping 192.168.1.252
PING 192.168.1.252 (192.168.1.252) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=3 Destination Host Unreachable
From 192.168.1.1 icmp_seq=4 Destination Host Unreachable

Nor from a hardware desktop to container:

192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.101 icmp_seq=1 Destination Host Unreachable
From 192.168.1.101 icmp_seq=2 Destination Host Unreachable

Narcis Garcia

[Updated on: Fri, 05 November 2010 13:52]

Report message to a moderator

Previous Topic:	[solved] pass dvb device to ve
Next Topic:	New user/New install issues ; cannot stat `/etc/sysconfig/vz-scripts//ve-vps.basic.conf-sample'

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 24 16:14:31 GMT 2024

Total time taken to generate the page: 0.04520 seconds